Routing modification example

Figure 6-6 revises the routes illustrated in Figure 6-2. LA_RS becomes an intermediate site between NY_RS and SF_RS, while direct and indirect routes to SB_RS are dropped.

Figure 6-6: Indirect routes altered

Figure 6-6 illustrates revised Figure 6-2. The indirect routes have been altered. L A underscore R S becomes an intermediate site between N Y underscore R S and S F underscore R S, while direct and indirect routes to S B underscore R S are dropped. There’s a direct route from N Y underscore R S to L A underscore R S, L A underscore R S to S D underscore R S, L A underscore R S to S F underscore R S, S F underscore R S to S A C underscore R S, and S F underscore R S to S J underscore R S. Available indirect routes are from N Y underscore R S to S A C underscore R S, N Y underscore R S to S F underscore R S, N Y underscore R S to S J underscore R S, and N Y underscore R S to S D underscore R S.

Here’s how you would revise the routing scheme shown in Figure 6-2 to resemble the scheme in Figure 6-6.

At each Replication Server that manages a database with a RepAgent, enter:
```
suspend log transfer from all
```
and follow the instructions in “Quiescing a replication system”. This procedure quiesces the replication system so that messages will be redirected to your new routing configuration without error.
LA_RS needs a direct route to SF_RS; create one by entering the following command at Replication Server LA_RS:
```
create route to SF_RS
set username SF_rsi_user
set password SF_rsi_ps
```
LA_RS requires indirect routes to SAC_RS and SJ_RS, through SF_RS.

Creating these routes instructs LA_RS to send messages to SF_RS that are destined for SAC_RS and SJ_RS. SF_RS already has direct routes to SAC_RS and SJ_RS. Enter the commands in Replication Server LA_RS:
```
create route to SAC_RS
set next site SF_RS
```
```
create route to SJ_RS
set next site SF_RS
```
The primary Replication Server, NY_RS, was previously configured with indirect routes through SF_RS to SAC_RS and SJ_RS. Alter those routes so that Replication Server LA_RS is the next Replication Server. Enter these commands in Replication Server NY_RS:
```
alter route to SAC_RS
set next site LA_RS
```
```
alter route to SJ_RS
set next site LA_RS
```
The direct route from the primary Replication Server, NY_RS, to SF_RS needs to be changed to an indirect route, with LA_RS as the intermediate Replication Server. Enter these commands in Replication Server NY_RS:
```
alter route to SF_RS
set next site LA_RS
```
At each Replication Server where you previously suspended log transfer, resume log transfer connections to each Replication Server by entering:
```
resume log transfer from all
```
Refer to Chapter 4, “Managing a Replication System” for more information on resuming log transfer.
Remove the indirect route from NY_RS to SB_RS. Enter this command in NY_RS:
```
drop route to SB_RS
```
Remove the direct route from LA_RS to SB_RS. Enter this command in LA_RS:
```
drop route to SB_RS
```
The indirect route from NY_RS to SD_RS, through LA_RS, is intact.