OpenSwitch log messages thrd_connect to thrd_ctparams

Message text	Explanation and action
`thrd__connect: Could not install challenge handler`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Could not install error handler`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Could not install message handler`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Could not install security session handler`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: cs_loc_alloc() failed!`	OpenSwitch may have temporarily run out of memory. Check previous errors in the OpenSwitch error log. You may need to allocate more memory to the OpenSwitch process, or reevaluate the load on the OpenSwitch server given the current resources. If the problem persists, contact Sybase Technical Support.
`thrd__connect: cs_loc_drop() failed!`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: cs_locale(CS_GET, CS_SYB_LANG) failed!`	Check your $SYBASE (UNIX) or %SYBASE% (Windows) directory. Verify that the locales and charsets directories are in place, and contain the correct information.
`thrd__connect: cs_locale(CS_SET, CS_SYB_LANG) failed!`	There was an error when loading the client locales into Adaptive Server. Check the client application to verify that locale is being set correctly.
`thrd__connect: ct_capability(CS_CAP_RESPONSE) failed!`	OpenSwitch was unable to set the capabilities for negotiation on Adaptive Server. Verify that the server is running, and check the Adaptive Server error log for any relevant errors.
`thrd__connect: ct_con_alloc() failed!`	OpenSwitch may have temporarily run out of memory. Check previous errors in the OpenSwitch error log. You may need to allocate more memory to the OpenSwitch process, or reevaluate the load on the OpenSwitch server given the current resources. If the problem persists, contact Sybase Technical Support.
`thrd__connect: ct_con_props(CS_CON_KEEPALIVE) failed.`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_CON_TCP_NODELAY ) failed.`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_HAFAILOVER) failed!`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_SET, CS_APPNAME) failed!`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_SET, CS_BULK_LOGIN) failed!`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_SET, CS_HIDDEN_KEYS) failed`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_SET, CS_HOSTNAME) failed!`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine. and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_con_props(CS_SET, CS_LOC_PROP) failed!`	There was an error setting the locale property in Adaptive Server. Check the client application to verify that locale is being set correctly.
`thrd__connect: ct_con_props(CS_SET, CS_PASSWORD) failed!`	The client password may be more than 255 characters long, or OpenSwitch may have not run out of file descriptors per process. If the problem persists, contact Sybase Technical Support.
`thrd__connect: ct_con_props(CS_SET, CS_USERNAME) failed!`	This is an internal OpenSwitch error that may occur if OpenSwitch runs out of memory or file descriptors. Check available memory on the machine, and limits on memory and open file descriptors for the OpenSwitch process.
`thrd__connect: ct_remote_pwd() failed`	Check that the user password is less than 255 characters long. Contact Sybase Technical Support for assistance if needed.
`thrd__connect: Error determining client security mechanism`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error determining delegated credentials`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error determining network authorization status`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error determining security delegation status`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error enabling client network authorization`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error getting client packet size.`	OpenSwitch was unable to get the TDS packet size from the client. Check that the application is setting the packet size correctly.
`thrd__connect: Error getting client TDS level.`	Check that the client application is setting the TDS version correctly.
`thrd__connect: Error setting client security mechanism to <string>`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error setting delegated credentials`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Error setting packet size.`	OpenSwitch was unable to set the TDS packet size from the client. Check that The application is setting the packet size correctly. Adaptive Server supports the specified packet size (sp_configure “max network packet size”). The MAX_PACKETSIZE parameter is set to a high enough value in your OpenSwitch configuration file.
`thrd__connect: Error setting TDS level.`	OpenSwitch was unable to set the client TDS version in Adaptive Server. Check that the client TDS version is supported on the server.
`thrd__connect: Thread already has a connection!`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Unable to determine remote spid`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Unable to get global context.`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Unable to set con trace flags to <number>`	Check the CON_TRACE settings in the OpenSwitch configuration file. Verify the settings against the Open Client Client-Library/C Reference Manual section on ct_debug.
`thrd__connect: Unable to set connection userdata`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__connect: Unable to set CS_ASYNC_NOTIFS`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__controlrow: ct_getformat() failed.`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__controlrow: srv_setcontrol() failed.`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__copy_loginfo: Loginfo to save is null`	Check that the `loginfo` sent by the client is not NULL. Contact Sybase Technical Support if needed.
`thrd__copy_loginfo: Unable to allocate a temporary loginfo structure`	Check the available memory on the OpenSwitch host. Increase the memory usage limit for OpenSwitch, and restart the OpenSwitch server.
`thrd__ct_cancel: Unable to determine status of connection`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_close: Connection busy, ct_close(CS_FORCE_CLOSE) failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_close: Connection pending, ct_close(CS_UNUSED) failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_close: ct_close() failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_close: ct_close(CS_FORCE_CLOSE) failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_cmd_drop: ct_close(CS_FORCE_CLOSE) failed`	This is an internal OpenSwitch error and can safely be ignored unless it affects OpenSwitch behavior.
`thrd__ct_cmd_drop: failed to drop command structure`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_cmd_drop: Unable to determine status of connection`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_con_drop: ct_con_drop() failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_connect: ct_con_props(CS_SET,CS_BULK_LOG IN) failed`	This is an internal OpenSwitch error, and is usually due to insufficient memory or number of file descriptors. Check the total memory on the OpenSwitch host, and any limit on memory usage or file descriptors for OpenSwitch.
`thrd__ct_connect: ct_getloginfo failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_connect: failed to save a copy of the server loginfo.`	This is an internal OpenSwitch error. Check previous errors in the OpenSwitch error log.
`thrd__ct_connect: srv_setloginfo failed`	There was an error setting the `loginfo` in the client in FULL_PASSTHRU mode. The client application may have timed out or disconnected unexpectedly. Contact Sybase Technical Support for assistance if necessary.
`thrd__ct_connect: srv_thread_props(CS_GET,SRV_T_D UMPLOAD) failed`	There was an error communicating with the client. The client application may have timed out or disconnected unexpectedly, or DUMPLOAD is set incorrectly. Contact Sybase Technical Support for assistance if necessary.
`thrd__ct_connect: srv_thread_props(CS_SET,SRV_T_B ULKTYPE) failed`	There was an error setting the BULKTYPE in the client in FULL_PASSTHRU mode. Contact Sybase Technical Support for assistance.
`thrd__ct_connect: srv_thread_props(SRV_T_EVENT) failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_connect: srv_thread_props(SRV_T_PASSTHRU ) failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ct_connect:ct_connect failed.`	Possible reasons for this error include: The client username and password may be invalid. Adaptive Server’s maximum number of user connections may have been exceeded. Adaptive Server may be too busy. Other client settings could be wrong. Check the Adaptive Server error log for more messages about this spid, and verify that Adaptive Server is running and accepting new connections. Setting DEBUG=e in the OpenSwitch configuration file will also give you more information about the problem.
`thrd__ct_connect:ct_setloginfo failed`	Check that the `loginfo` sent by client is correct. Check the Adaptive Server error log for additional error messages.
`thrd__ct_connect:srv_getloginfo failed.`	There was an error getting the `loginfo` from the client. The client application may have timed out or disconnected unexpectedly, or `loginfo` sent may be incorrect. Contact Sybase Technical Support if needed.
`thrd__ct_fetch: Error canceling connection`	There was an error canceling the last request. Check previous errors in the OpenSwitch error log.
`thrd__ct_get_data: Error canceling connection`	There was an error canceling the last request. Check previous errors in the OpenSwitch error log.
`thrd__ct_options: Error canceling connection`	There was an error canceling the last request. Check previous errors in the OpenSwitch error log.
`thrd__ct_results: Error canceling connection`	There was an error canceling the last request. Check previous errors in the OpenSwitch error log.
`thrd__ct_send_data: Error canceling connection`	There was an error canceling the last request. Check previous errors in the OpenSwitch error log.
`thrd__ctparams: ct_param() failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__ctparams: srv_bind() failed`	OpenSwitch was unable to process the input parameters from the client. The client may have disconnected due to time-out or other errors, or the input parameters may be invalid.
`thrd__ctparams: srv_descfmt() failed`	OpenSwitch is unable to get the description of the input parameters from the client. The client may have disconnected due to time-out or other errors, or the input parameters may be invalid.
`thrd__ctparams: srv_numparams() failed`	OpenSwitch is unable to get the input parameters from the client. The client may have disconnected due to time-out or other errors, or the input parameters may be invalid.
`thrd__ctparams: srv_xferdata() failed`	OpenSwitch is unable to get the input parameters from the client. The client may have disconnected due to time-out or other errors, or the input parameters may be invalid.
`thrd__ctparams: Unable to get global context`	OpenSwitch is unable to retrieve information from the client. The client may have disconnected due to time-out or other errors, or the input parameters may be invalid.