OpenSwitch log messages thrd_alloc to thrd_close

Message text	Explanation and action
`thrd__alloc: Error inserting into global thread list`	This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.
`thrd__alloc: srv_capability_info(CS_CAP_RES PONSE) failed`	Call to srv_capability_info (CS_GET, CS_CAP_RESPONSE) failed. The client may have disconnected, due to time-out or other errors, before OpenSwitch responded. This could be due to a network delay or excessive system load. Check the CPU and memory usage of each process running on the system for more information.
`thrd__alloc: Unable to allocate locale structure`	This is an internal OpenSwitch error, usually due to insufficient memory or file descriptors. Check previous errors in the OpenSwitch log file. Check the total memory on the OpenSwitch host and the open file descriptors available to OpenSwitch.
`thrd__alloc: Unable to allocate mutex '<MUTEX>'`	Check previous errors in the OpenSwitch log file. OpenSwitch may have temporarily run out of memory or other resources to create a mutex. If the problem persists, contact Sybase Technical Support.
`thrd__alloc: Unable to attach thread data to SRV_PROC`	This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.
`thrd__alloc: Unable to fetch APPLNAME property`	This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.
`thrd__alloc: Unable to fetch CLIB property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_CLIB) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to fetch HOSTNAME property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_HOSTNAME) failed. Contact Sybase Technical Support.
`thrd__alloc: Unable to fetch PASSWORD property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_PWD) failed. Contact Sybase Technical Support.
`thrd__alloc: Unable to fetch SRV_T_NEGLOGIN property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_NEGLOGIN) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to fetch TYPE property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_TYPE) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to fetch USERNAME property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_USER) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to get locale information`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_LOCALE) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to get thread spid`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_SPID) failed. Contact Sybase Technical Support
`thrd__alloc: Unable to grab global context`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_CONTEXT) failed. Check previous errors in the OpenSwitch log file.
`thrd__alloc: Unable to perform password encryption handshake`	This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.
`thrd__alloc_special: Error inserting into global thread list`	OpenSwitch may have temporarily run out of memory. Check previous errors in the OpenSwitch error log. You may need to allocate more memory to the OpenSwitch process, or reevaluate the load on the OpenSwitch server given the current resources. If the problem persists, contact Sybase Technical Support.
`thrd__alloc_special: Unable to allocate mutex <MUTEX>`	OpenSwitch may have temporarily run out of memory or other resources to create a mutex. Check previous errors in the OpenSwitch error log. If the problem persists, contact Sybase Technical Support.
`thrd__alloc_special: Unable to attach thread data to SRV_PROC`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__alloc_special: Unable to fetch TYPE property`	This is an internal OpenSwitch error. A call to srv_thread_props (CS_GET, SRV_T_TYPE) failed. Contact Sybase Technical Support for assistance.
`thrd__alloc_special: Unable to get thread spid`	This is an internal OpenSwitch error. A contact to srv_thread_props (CS_GET, SRV_T_SPID) failed. Contact Sybase Technical Support for assistance.
`thrd__bulkload: blk_alloc() failed`	OpenSwitch may have temporarily run out of memory. Check previous errors in the OpenSwitch error log. You may need to allocate more memory to the OpenSwitch process, or reevaluate the load on the OpenSwitch server given the current resources. If the problem persists, contact Sybase Technical Support.
`thrd__bulkload: blk_props() failed`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__bulkload: blk_srvinit() failed`	OpenSwitch may have temporarily run out of memory. Check previous errors in the OpenSwitch error log. You may need to allocate more memory to the OpenSwitch process, or reevaluate the load on the OpenSwitch server given the current resources. If the problem persists, contact Sybase Technical Support.
`thrd__cache_add: Cannot create timer`	OpenSwitch may have temporarily run out of memory, but it should continue to function normally after the error. Check the OpenSwitch error log for more information or failures preceding this error. If the problem persists after increasing the memory allocated to OpenSwitch, contact Sybase Technical Support.
`thrd__cache_add: Cannot detach thrd_t structure`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_add: Error destroying old mutex.`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_add: failed to add connection to the global list.`	OpenSwitch may have temporarily run out of memory, but it should continue to function normally after the error. Check the OpenSwitch error log for more information or failures preceding this error. If the problem persists after increasing the memory allocated to OpenSwitch, contact Sybase Technical Support.
`thrd__cache_add: failed to remove the old thread from the global list`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_add: Unable to allocate cache mutex <MUTEX>`	OpenSwitch may have temporarily run out of memory, but it should continue to function normally after the error. Check the OpenSwitch error log for more information. If the error causes a change in OpenSwitch behavior, contact Sybase Technical Support.
`thrd__cache_clear: Error deleting list node for spid <ID>`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_get: Error deleting list node for spid <ID>`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_get: Error destroying old mutex.`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_get: failed to add thread back to the global list.`	OpenSwitch may have temporarily run out of memory, but it should continue to function normally after the error. Check the OpenSwitch error log for more information or failures preceding this error. If the problem persists after increasing the memory allocated to OpenSwitch, contact Sybase Technical Support.
`thrd__cache_get: Unable to allocate new mutex <MUTEX>`	OpenSwitch may have temporarily run out of memory, but it should continue to function normally after the error. Check the OpenSwitch error log for more information. If the error causes a change in OpenSwitch behavior, contact Sybase Technical Support.
`thrd__cache_get: Unable to detach thrd_t structure`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_get: Unable to re-own thrd_t structure`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_timer: failed to remove the unused cached connection from the global cache list`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__cache_timer: Terminating unused cach thread spid <SPID>`	`thrd__cache_timer:` Removing unused cache connection <ADDRESS>.
`thrd__cache_timer_remove: Unable to remove '<ADDRESS>' from timer`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__chgsrv : User '<USERNAME>', app '<APP_NAME>', error replaying sql`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__chgsrv : User '<USERNAME>', app '<APP_NAME>', unable to reprepare dynamic statement '<STATEMENT>'`	OpenSwitch switched the connection to the secondary Adaptive Server, but it is unable to re-prepare the dynamic SQL statement on the secondary Adaptive Server.
`thrd__chgsrv : User '<USERNAME>', app '<APP_NAME>', unable to restore database context to '<DATABASE>'`	OpenSwitch switched the connection to the secondary Adaptive Server, but is unable to restore the connection to the database that the application was in at the time of the switch. It will restore the connection to the master database. Verify that the named database exists on the secondary Adaptive Server.
`thrd__chgsrv : User '<USERNAME>', app '<APP_NAME>', unable to restore client-side cursor '<CURSOR_NAME>'`	OpenSwitch switched the connection to the secondary Adaptive Server, but is unable to restore the client-side cursor on the secondary Adaptive Server. Contact Sybase Technical Support for assistance.
`thrd__chgsrv : User '<USERNAME>', app '<APP_NAME>', unable to restore server options`	OpenSwitch switched the connection to the secondary Adaptive Server, but is unable to restore the options set in the previous Adaptive Server. See the relevant Sybase documents for your client APIs, and check that the secondary Adaptive Server can support the option OpenSwitch was trying to restore. This may require that your secondary Adaptive Server be at the same version as your primary Adaptive Server.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', error replaying sql`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', unable to restore connection to '<SERVERNAME>'`	OpenSwitch is unable to switch the connection to the companion of the failed Adaptive Server due to an error. The connection will be failed over to the next available server in the pool. Check the status of the companion server and verify that it is accepting connections.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', unable to restore database context to '<DATABASE>'.`	OpenSwitch switched the connection to the companion server of the failed Adaptive Server cluster, but is unable to restore the connection to the database that the application was in at the time of the switch. It will restore the connection to the master database. Verify that the named database has been mounted on the companion Adaptive Server after the failover, and contact Sybase Technical Support.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', unable to reprepare dynamic statement '<STATEMENT>'`	OpenSwitch switched the connection to the companion server of the failed Adaptive Server cluster, but is unable to prepare the same Dynamic SQL statement on the companion Adaptive Server. Contact Sybase Technical Support for assistance.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', unable to restore client-side cursor '<CURSOR_NAME>'`	OpenSwitch switched the connection to the secondary server of the failed cluster, but is unable to restore the client-side cursor on the secondary Adaptive Server. Contact Sybase Technical Support for assistance.
`thrd__chgsrv_ha : User '<USERNAME>', app '<APP_NAME>', unable to restore server options`	OpenSwitch switched the connection to the secondary Adaptive Server, but is unable to restore the options set in the previous Adaptive Server. See the relevant Sybase documents for your client APIs, and check that the secondary Adaptive Server can support the option OpenSwitch was trying to restore.
`thrd__close: Unable to close cursor '<CURSOR_NAME>'`	This is an internal OpenSwitch error. Contact Sybase Technical Support for assistance.
`thrd__close: Unable to close dynamic statement '<STATEMENT>'`	This is an internal OpenSwitch error. Check previous errors in the OpenSwitch error log.