Installing the Data Tier on its Own Host for a Developer Installation

Install the data tier for Developer Edition on a different host machine from the rest of Sybase Unwired Platform. Do this before installing Unwired Platform components on other cluster nodes.

Prerequisites

Going through the appropriate task flow in Developer Edition Task Flows, you should have performed these tasks:

Download a license file. See Obtaining a License.
(Optional) Create an installation image on your network. See Creating an Installation Image on the Network.
Verify the installation prerequisites. See System Requirements for Unwired Platform.
Verify that you are logged in with administrative rights.
Install Adobe Flash Player 9.0.124+ or FP10.x (recommended).
Shut down any Sybase products, Sybase processes, and associated third-party processes that are currently running on the server where you are now installing. This includes any database servers, OpenDS server, and Sybase Control Center.
Due to a NetBIOS limitation, make sure the host name is fewer than 15 characters. See the Microsoft Help and Support article Naming Conventions in Active Directory (909264).
Print the Installation Worksheet to note pertinent installation details. Having this information available will expedite the completion of installations on subsequent cluster nodes.
If you need to use a Developer Edition via Remote Desktop Connection (RDC), Terminal Services, or similar remote access technology, you cannot use unserved licenses. You must generate served licenses and use a license server. Virtual machines (VMs) that are not locally hosted typically require RDC, so also require served licenses. If installing on a VM with an unserved license, you must use console 0 to access the VM to perform the installation.

Note:

If you run the Developer Edition installer again on a machine where you have already installed Unwired Platform version 1.5.2, the installer detects the existing installation and takes you to the component selection page as soon as you have accepted the end user licensing agreement. Resume with step 12 in Performing a Custom Installation of Developer Edition.

Start the Sybase Unwired Platform installer using one of these methods:
- Insert the Sybase Unwired Platform installation media.
- Install from a Web download. Extract the four archives to the same temporary directory on a local disk, not a shared drive.
- Install from an image on the network. You must access the installation image from a mapped drive, not a UNC path.
1. If installing from installation media, select Start > Run.
2. Browse to the location of the setup.exe file on the installation media or in the temporary directory, and click OK.
On the installer welcome page, click Next.

On the license type page, select your license type and click Next.

Option	Description
Evaluation	Allows you to evaluate Unwired Platform for 30 days. A license file is not required.
Unserved (local) license	A standalone license managed locally by your workstation. Be sure you know the location of the license file.
Served (remote) license	A standalone license managed by a license server. Be sure you know your license manager host name and TCP port.

On the end-user license agreement page, accept the terms of the license agreement.
1. Select the appropriate geographic location and read the license agreement.
2. Click I Do Agree to the Terms of the Sybase License, for the Install Location Specified, then click Next.

On the license details page, select the information for your product license. See Locating Information in a License File.

Field	Valid values
License product edition	ED: Enterprise Developer Edition PD: Personal Developer Edition
License type	If you selected ED for license product edition, license type must be DT: Development and Test License. If you selected PD for license product edition, then license type must be SS: Standalone Seat License.

Field

Valid values

License product edition

ED: Enterprise Developer Edition
PD: Personal Developer Edition

License type

If you selected ED for license product edition, license type must be DT: Development and Test License.

If you selected PD for license product edition, then license type must be SS: Standalone Seat License.

Note: If you enter a combination of values on this page that does not match your license file, the error is not detected until the installer attempts to check out your license on the next page.

Enter your license information.
If you selected "Unserved (local) license" as the license type, on the unserved license file page enter the full path to the license file. Click Browse to browse to the file location.

If you selected "Served (remote) license" as the license type, on the SySAM license manager server page enter the Host Name of License Server and, optionally, change the TCP Port of License Server entry.

If you see a Failed to check out license error, and you think you may have entered license settings that do not match your license, click OK, then click Back to reenter the license settings.
On the installation directory page, accept the default installation directory or choose a different one.
- If the directory does not exist, click OK to create it.
- For best results, use English or Western European characters (cp1252/ISO-8859-1) for the installation directory path and directory names.
- You can use the underscore or hyphen character, but do not use symbols or spaces in the installation directory name.
Note: The directory path where Sybase Control Center is installed varies. If the SYBASE environment variable is defined and valid, Sybase Control Center installs in the directory path specified by the variable. Otherwise, Sybase Control Center installs in a sibling directory to the installation directory specified here. For example, if the installation directory is C:\Sybase\UnwiredPlatform, Sybase Control Center installs into C:\Sybase\SCC-3_0.
On the installation type page, select Cluster and click Next.
On the cluster setup selection page, select Install the data tier for your Unwired Platform cluster and click Next.
(Optional) Select additional installation options. The available options on the additional installation options page depend on the selections you made on the component selection page; you may not see all of the options listed below. Choose:
- Configure data tier to change default port numbers for the data tier or to install data tier into a high availability environment. This option appears only when you install the data tier without Unwired Server.
- Use Unwired Platform with an existing JDK Installation to indicate the fully qualified path to an existing JDK installation directory. Sybase Unwired Platform requires JDK 1.6.0_16.
  Note: On 64-bit systems, specify the fully qualified path to an existing 32-bit JDK installation.

On the cluster configuration information page, enter the information necessary to access the data tier in a cluster.

Option	Description
Cluster Configuration Password	Enter the password used by the cluster administrator to configure the cluster.
Confirm Cluster Configuration Password	Reenter the cluster configuration password.
UNC path to shared data folder Note: This field appears only when you are installing Unwired Server without the data tier	Universal naming convention path to the shared data folder. This folder must already exist, with the data tier installed and be shared to your network with write privileges. If the data tier is installed in the default installation directory on its host, the local path would be C:\Sybase\UnwiredPlatform\Data. You would share this directory to your network. If you share this directory with the name `Data`, and the computer where you are installing is named `myserver`, the UNC path would be \\myserver\Data.

Option

Description

Cluster Configuration Password

Enter the password used by the cluster administrator to configure the cluster.

Confirm Cluster Configuration Password

Reenter the cluster configuration password.

UNC path to shared data folder

Note: This field appears only when you are installing Unwired Server without the data tier

Universal naming convention path to the shared data folder. This folder must already exist, with the data tier installed and be shared to your network with write privileges.

If the data tier is installed in the default installation directory on its host, the local path would be C:\Sybase\UnwiredPlatform\Data. You would share this directory to your network.

If you share this directory with the name Data, and the computer where you are installing is named myserver, the UNC path would be \\myserver\Data.

If you selected "Configure Data Tier" on the additional installation options page, on the port numbers for data tier page, enter port numbers and, optionally, specify a high availability environment:

Option	Description
Database Server	Port number for the data tier that manages transactions between the enterprise information system and mobile devices. The default is 5200.
Messaging Server	HTTP port for the messaging configuration Web service, used by Sybase Control Center to perform deployment and administration tasks related to the Unwired Server messaging server and devices, and workflow application. The default is 6262.
Afaria Database	The Afaria Server database port number. The default is 4343.
Install Data Tier into high availability environment	Select this option to install the data tier in a Microsoft cluster. The next two fields appear only when you select this option. For more information on using a Microsoft cluster with Unwired Platform, see System Administration for Sybase Unwired Platform > Systems Design > Clustered Environments > Implementing an N+2-node Cluster for Optimal Redundancy.
Enter a path to Microsoft cluster setup	Enter the location of the high availability Microsoft cluster, beginning with a drive letter. Note: This cannot be a UNC path. If the high availability data location is on a different server, map a path to that server as a network drive and use the mapped drive letter in the path you enter here.
Enter a name for database server	Enter the name to be used for the data tier server in the Microsoft cluster. Note: The data tier server is renamed to `<name_you_enter_here>`. The Afaria database server is renamed to AFDB_`<name_you_enter_here>`.

On the summary information page, verify the installation features and click Install.
(Optional) Click View Release Bulletin.
Click Finish.

Next

Install the first node for the cluster. See Installing the First Node for a Developer Cluster Installation.