OpenSwitch log messages CS-Library to event_stop

CS-Library Operating System Error <os_number> - <os_string>.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

dyns_get_stmtid: mem_alloc(idlen) failed!

OpenSwitch encountered a memory allocation failure. Either reduce the load on this machine, or increase the memory available to the OpenSwitch process on host machine and restart the OpenSwitch server.

dyns_get_stmtid: srv_dynamic(CS_GET, SRV_DYN_ID) failed!

Verify that the client application called ct_dynamic with a valid id. See the relevant Sybase documents for your client’s APIs.

dyns_get_stmtid: srv_dynamic(CS_GET, SRV_DYN_IDLEN) failed!

Check the call to ct_dynamic in the client application and verify that a valid strlen of the (ID) CS_NULLTERM is passed. See the relevant Sybase documents for your client’s APIs.

event__connect: An error occurred while getting the TDS level from the server you are connecting to. Verify that the server is still up and that you have connectivity.

Check that the Adaptive Server is still running and that you can connect to it.

event_bulk: Unable to release control of the thread.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_connect: An error occurred while negotiating the request capabilities with the Server you are connecting to. Verify that the server is still running and that you have connectivity.

Check that the Adaptive Server is still running and that you can connect to it.

event_connect: An error occurred while negotiating the request capabilities with the client application. Verify that the client application is still running and that it has connectivity to the OpenSwitch.

This message is usually raised when a client disconnects abruptly due to time-out or some other reason. If OpenSwitch operation is not affected, you can ignore this message. Otherwise, call Sybase Technical Support for assistance.

event_connect: An error occurred while negotiating the response capabilities with the Server you are connecting to. Verify that the server is still running and that you have connectivity.

Verify that Adaptive Server is still running and that you can connect to it.

event_connect: An error occurred while negotiating the response capabilities with the client application. Verify that the client application is still running and that it has connectivity to the OpenSwitch.

This message is usually raised when a client disconnects abruptly due to time-out or some other reason. If OpenSwitch operation is not affected, you can ignore this message. Otherwise, call Sybase Technical Support for assistance.

event_connect: Cannot determine thread type.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_cursor: Fatal thread error...

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_cursor: srv_cursor_props(CS_GET) failed.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_debug: %s: Unable to determine if an attention or disconnect event triggered the handler

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_debug: <FUNCTION_NAME>: Unable to determine if an attention or disconnect event triggered the handler.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_debug: <FUNCTION_NAME>: Unable to get the context of the client.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_disconnect: Cannot determine thread type.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_disconnect: i18n_free_locale failed.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_dynamic: Unable to release thread control.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_fp: Error sending to client.

The client may have disconnected due to time-out or network errors. If the client connection is intact, call Sybase Technical Support for assistance.

event_fp: Cleaning up failed SRV_LANGUAGE.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_fp: ct_recvpassthru failed.

The client may have disconnected due to time-out or network errors. If the client connection is intact, call Sybase Technical Support for assistance.

event_fp: Failure during recv from client.

The client may have disconnected due to time-out or network errors. If the client connection is intact, contact Sybase Technical Support for assistance.

event_fp: Failure during send to server.

Check that the Adaptive Server is still running and that you can connect to it.

event_fp: thrd_get failed.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_fp: Unable to create new command.

This is an internal OpenSwitch error, usually due to insufficient memory. Check available memory on the OpenSwitch host and limits, if any, on memory available to the OpenSwitch process.

event_fp: Unable to release control of the thread.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_fp: Unexpected state from ct_sendpassthru.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_init: $OPENSWITCH_CFG: Invalid value for option.

The environment variable OPENSWITCH_CFG may be incorrectly set. Check that it points to a valid OpenSwitch configuration file.

event_init: <option>: Invalid option"

Check that the specified command line option in the configuration file is valid.

event_init: <option>: Invalid value for option.

Check that the value specified for the command line option in the configuration file is valid.

event_init: -c: No configuration file defined.

Check that you have correctly specified the configuration file with its absolute path.

event_init: Call to pool_init() failed.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_init: Call to server_init() failed.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_init: Call to unilib_init() failed

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_init: Error accessing configuration file.

Check that the absolute location of the configuration file is valid.

event_init: Error performing service initialization.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_init: Failed to initialize shared locks.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_init: -R: Must supply 'install' and 'remove'.

Check that a valid argument was supplied for the –R option. Valid arguments are install and remove.

event_init: Unable to allocate memory pool.

Check available memory on the OpenSwitch host and any memory usage limit on the OpenSwitch process. Increase this limit and restart OpenSwitch.

event_init: Unable to configure server.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file and contact Sybase Technical Support to report the error.

event_init: Unable to find or read the locale message file: <lcu_filename>.

Check that the oswitch.lcu file exists in the $SYBASE/locales/unicode/oswitch/<language> (UNIX) or %SYBASE%\locals\unicode\oswitch\<language> (Windows) directory. If it does, contact Sybase Technical Support to report the error.

event_init: Unable to initialize server.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_init: Unable to initialize CT-Library.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_init: Unable to initialize debugging.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_init: Unable to initialize <version> Open Client.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_lang: Unable to release control of the thread.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_option: Unable to release control of the thread.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_rpc: Cannot determine thread type.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_rpc: Unable to release thread control.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start: Error processing config file.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start: Unable to initialize registered procs.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start: Unable to start services.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start: Unable to start up mutex service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_start: Unable to stop services.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start_services: Unable to shut down sleep service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_start_services: Unable to shut down slock service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_start_services: Unable to shut down thread service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_start_services: Unable to start connection monitor.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start_services: Unable to start resource monitor.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_start_services: Unable to start thread service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_start_services: Unable to start timer service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_stop: Shutting Down.

This is an informational message. The server is shutting down and all client connections will be terminated.

event_stop: Unable to shut down thread service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_stop_services: Unable to shut down mutex service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_stop_services: Unable to shut down resource monitor service.

This is an internal OpenSwitch error. Check previous errors in the OpenSwitch log file.

event_stop_services: Unable to shut down sleep service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.

event_stop_services: Unable to shut down slock service.

This is an internal OpenSwitch error. Contact Sybase Technical Support to report the error.