Error Messages Relating to Stores
Code |
158057 |
Severity |
Error |
Message |
Invalid value {1} has been specified to option {0}. |
Description |
No additional information available. |
Code |
158058 |
Severity |
Info |
Message |
*** LOG RESERVE WAS OVERRIDDEN BY DEBUG SETTING TO {0} *** |
Description |
No additional information available. |
Code |
158059 |
Severity |
Debug |
Message |
After commit new root {0}, cache size {1}. |
Description |
No additional information available. |
Code |
158060 |
Severity |
Debug |
Message |
LogIndexNodeCache::commitTransaction moving {0} nodes. |
Description |
No additional information available. |
Code |
158061 |
Severity |
Debug |
Message |
LogIndexNodeCache::commitTransaction now have {0} nodes. |
Description |
No additional information available. |
Code |
158062 |
Severity |
Debug |
Message |
remove node {0}: not found. |
Description |
No additional information available. |
Code |
158063 |
Severity |
Debug |
Message |
{0}: Sequenced accessors not allowed! |
Description |
No additional information available. |
Code |
158064 |
Severity |
Error |
Message |
Cyclic relationhip detected between log store {0} and log store {1}. |
Description |
Log Stores cannot be involved in a cyclic relationship. Consider redistributing the Streams across different Stores. |
Code |
158065 |
Severity |
Error |
Message |
An internal error has occurred. Unable to find store {0} |
Description |
No additional information available. |
Code |
158066 |
Severity |
Error |
Message |
Default store declaration ({0}) has been defined after a window declaration requiring a default store. |
Description |
The default store declaration must precede window declarations requiring a default store. |
Code |
158067 |
Severity |
Debug |
Message |
Line {0}: Intermediate Store redefined for this object. Using new value. |
Description |
No additional information available. |
Code |
158068 |
Severity |
Debug |
Message |
{0} LogIndexNodeCache::get({1}) cached node to {2}. |
Description |
No additional information available. |
Code |
158069 |
Severity |
Debug |
Message |
{0} LogIndexNodeCache::commitCache() old {1} cache {2} new {3} |
Description |
No additional information available. |
Code |
158070 |
Severity |
Debug |
Message |
{0} LogIndexNodeCache::get({1}) disk node to {2} |
Description |
No additional information available. |
Code |
158071 |
Severity |
Error |
Message |
Stream {0} is not a direct copy of its source but is associated with a log store and has retention specified. |
Description |
Only streams that are a direct copy of its source can have retention and be associated with a log store. |
Code |
158072 |
Severity |
Debug |
Message |
{0} {1} {key={2}, left={3}, right={4}, bal={5}} |
Description |
No additional information available. |
Code |
158073 |
Severity |
Error |
Message |
Multiple default store declarations ({0},{1}) have been found. |
Description |
No additional information available. |
Code |
158074 |
Severity |
Debug |
Message |
{0} after commitCache() {1} nodes left |
Description |
No additional information available. |
Code |
158075 |
Severity |
Error |
Message |
{0} can only be specified for log stores. |
Description |
No additional information available. |
Code |
158076 |
Severity |
Error |
Message |
{0} can only be specified for memory stores. |
Description |
No additional information available. |
Code |
158077 |
Severity |
Error |
Message |
The data type of parameter {0} does not match the property datatype. |
Description |
No additional information available. |
Code |
158078 |
Severity |
Error |
Message |
Invalid store property {0} specified. |
Description |
No additional information available. |
Code |
158079 |
Severity |
Error |
Message |
{0} {1} is not an insert only stream but is assigned to a Stateless Store. |
Description |
Only insert-only Streams are eligible to be part of a Stateless Store. |
Code |
158080 |
Severity |
Debug |
Message |
Line {0}: Store Information redefined for this object. Using the new value. |
Description |
No additional information available. |
Code |
158081 |
Severity |
Error |
Message |
Undefined Intermediate Store '{0}' used in stream definition {1}. |
Description |
No additional information available. |
Code |
158082 |
Severity |
Error |
Message |
Undefined parameter {0} used to specify the retention value for window {1}. |
Description |
No additional information available. |
Code |
158083 |
Severity |
Error |
Message |
Undefined Store '{0}' used in window definition {1} |
Description |
No additional information available. |
Code |
158084 |
Severity |
Error |
Message |
A file name must be specified for log stores. |
Description |
No additional information available. |
Code |
158085 |
Severity |
Error |
Message |
An internal error has occurred. should never happen. |
Description |
No additional information available. |
Code |
158086 |
Severity |
Debug |
Message |
*** SIMULATED CRASH BEFORE THE CLEANING *** |
Description |
No additional information available. |
Code |
158087 |
Severity |
Debug |
Message |
*** SIMULATED CRASH AT THE END OF COMPACTION *** |
Description |
No additional information available. |
Code |
158088 |
Severity |
Debug |
Message |
*** SIMULATED CRASH AT THE END OF LOG CLEANING *** |
Description |
No additional information available. |
Code |
158089 |
Severity |
Error |
Message |
An event cache cannot be defined for a delta stream ({0}). |
Description |
Delta streams do not support event caches. |
Code |
158090 |
Severity |
Error |
Message |
Streams do not support aggregation operations. |
Description |
No additional information available. |
Code |
158091 |
Severity |
Error |
Message |
A pattern stream does not support filter expressions or aggregation operations. |
Description |
WHERE, GROUP BY, GROUP ORDER BY clauses or aggregation functions cannot be specified while defining a pattern stream. |
Code |
158092 |
Severity |
Error |
Message |
An event cache cannot be defined for a pattern stream ({0}). |
Description |
Pattern streams do not support event caches. |
Code |
158093 |
Severity |
Warning |
Message |
An invalid time interval has been specified in the pattern expression, converting to {0} millisecond(s). |
Description |
The time interval granularity must be specified in milliseconds or coarser units. |
Code |
158094 |
Severity |
Error |
Message |
Invalid WHERE/ON join condition {0} specified. Must be of the form alias1.col = alias2.col [ AND alias1.col = alias2.col ...]. |
Description |
No additional information available. |
Code |
158095 |
Severity |
Error |
Message |
Columns from the same stream alias ({0}) is on both sides of the join condition. |
Description |
Columns from the same stream alias can only be one side of the equal operator when specifying join condition. |
Code |
158096 |
Severity |
Error |
Message |
There are too many STREAM inputs for a join. A join can only have one STREAM as input. |
Description |
No additional information available. |
Code |
158097 |
Severity |
Error |
Message |
Delta Stream {0} is a source to a join but it does not specify a retention. |
Description |
A Delta Stream can only be an input to a join only if it has a retention specified. |
Code |
158098 |
Severity |
Error |
Message |
Stream {0} specifies a retention. Only Windows and Delta Streams can have a retention. |
Description |
No additional information available. |
Code |
158099 |
Severity |
Error |
Message |
Invalid identifier "{0}". The identifier must not contain the '.' character. |
Description |
Please choose an identifier that does not contain the '.' character. |
Code |
158100 |
Severity |
Warning |
Message |
An invalid time interval has been specified for the event cache, converting to {0} millisecond(s). |
Description |
The time interval granularity must be specified in milliseconds or coarser units. |
Code |
158101 |
Severity |
Error |
Message |
Pattern matching expressions are only allowed to contain equality expressions. |
Description |
Pattern matching expressions are only allowed to contain equality expressions. |
Code |
158102 |
Severity |
Error |
Message |
An old, deprecated datatype is used. Please use the newer versions of the datatypes, namely integer for int32, long for int64 and float for double. |
Description |
An old, deprecated datatype is used. Please use the newer versions of the datatypes, namely integer for int32, long for int64 and float for double. |
Code |
158103 |
Severity |
Error |
Message |
Pattern matching clause is only supported for STREAMS. |
Description |
A pattern matching clause is used in the definition of a WINDOW or DELTA STREAM. It is only allowed in the defintion of a STREAM. |
Code |
158104 |
Severity |
Error |
Message |
Incorrect order of clauses has been specified. Please review the syntax. |
Description |
Incorrect order of clauses has been specified. Please review the syntax. |
Code |
158105 |
Severity |
Error |
Message |
Multiple schema clauses have been specified. Please review the syntax. |
Description |
Multiple schema clauses have been specified. Please review the syntax. |
Code |
158106 |
Severity |
Error |
Message |
Multiple primary key clauses have been specified. Please review the syntax. |
Description |
Multiple primary key clauses have been specified. Please review the syntax. |
Code |
158107 |
Severity |
Error |
Message |
Multiple store clauses have been specified. Please review the syntax. |
Description |
Multiple store clauses have been specified. Please review the syntax. |
Code |
158108 |
Severity |
Error |
Message |
Multiple aging clauses have been specified. Please review the syntax. |
Description |
Multiple aging clauses have been specified. Please review the syntax. |
Code |
158109 |
Severity |
Error |
Message |
Multiple dump clauses have been specified. Please review the syntax. |
Description |
Multiple dump clauses have been specified. Please review the syntax. |
Code |
158110 |
Severity |
Error |
Message |
Multiple filter clauses have been specified. Please review the syntax. |
Description |
Multiple filter clauses have been specified. Please review the syntax. |
Code |
158111 |
Severity |
Error |
Message |
Multiple autogenerate clauses have been specified. Please review the syntax. |
Description |
Multiple autogenerate clauses have been specified. Please review the syntax. |
Code |
158112 |
Severity |
Error |
Message |
An aging clause has been specified for a stateless stream. Stateless streams do not support aging. Please review the syntax. |
Description |
An aging clause has been specified for a stateless stream. Stateless streams do not support aging. Please review the syntax. |
Code |
158113 |
Severity |
Error |
Message |
A Declare clause has been specified for an INPUT STREAM. INPUT STREAM's don't support local declare blocks. Please review the syntax. |
Description |
A Declare clause has been specified for a INPUT STREAM. INPUT STREAM's don't support local declare blocks. Please review the syntax. |
Code |
158114 |
Severity |
Error |
Message |
A filter clause has been specified. Only input STREAM's support filter clauses. Please review the syntax. |
Description |
A filter clause has been specified. Only input STREAM's support filter clauses. Please review the syntax. |
Code |
158115 |
Severity |
Error |
Message |
A declare clause has been specified for an INPUT WINDOW. INPUT WINDOW's don't support declare clauses. Please review the syntax. |
Description |
A declare clause has been specified for an INPUT WINDOW. INPUT WINDOW's don't support declare clauses. Please review the syntax. |
Code |
158116 |
Severity |
Error |
Message |
Autogenerate clause is only valid for input streams. Please review the syntax. |
Description |
Autogenerate clause is only valid for input streams. Please review the syntax. |
Code |
158117 |
Severity |
Error |
Message |
The stream(s) {0} is specified more than once in the context of the when expression {1}. |
Description |
Each stream can only be specified once in the context of a splitter when expression. |
Code |
158118 |
Severity |
Error |
Message |
The stream(s) {0} is specified more than once in the context of the splitter else clause. |
Description |
Each stream can only be specified once in the context of a splitter else clause. |
Code |
158119 |
Severity |
Error |
Message |
The return type is '{0}' for the splitter when clause expression {1}. The return type must be an integer. |
Description |
The splitter when clause expression must return an integer. |
Code |
158120 |
Severity |
Error |
Message |
{0}({1}): An output break point cannot be added to the logic element of a multi-output stream. Add the output break point to one of the target streams. '{2}' |
Description |
When a stream has multiple outputs only an input break point can be added to the logic element. |
Code |
158121 |
Severity |
Error |
Message |
{0}({1}): An input break point cannot be added to the target of a multi-output stream. Add the input break point to the logic element. '{2}' |
Description |
When a stream has multiple outputs only an output break point can be added to one of the target streams. |
Code |
158122 |
Severity |
Error |
Message |
Splitter {1} is defined as an input for an explicitly defined stream {0}. This is not allowed. |
Description |
Only the splitters's target streams that appear in the WHEN and ELSE clauses can feed a stream defined outside of the CREATE SPLITTER statement. |
Code |
158123 |
Severity |
Error |
Message |
The Splitter itself is defined as one of the targets in the {0}. This is not allowed. |
Description |
The splitter itself can be defined as a target stream. |
Code |
158124 |
Severity |
Error |
Message |
Multiple query clauses have been specified. Please review the syntax. |
Description |
Multiple query clauses have been specified. Please review the syntax. |
Code |
158125 |
Severity |
Error |
Message |
A query clause has been specified. Only local and output streams support query clauses. Please review the syntax. |
Description |
A query clause has been specified. Only local and output streams support query clauses. Please review the syntax. |