Error Messages Relating to Internal Adapters
Code | 300001 |
Severity | Debug |
Message | ~FixIn_Adapter() |
Description | ~FixIn_Adapter() |
Code | 300002 |
Severity | Debug |
Message | FixIn_Adapter::reset() |
Description | FixIn_Adapter::reset() |
Code | 300003 |
Severity | Debug |
Message | FixIn_Adapter::openFileSource() |
Description | FixIn_Adapter::openFileSource() |
Code | 300004 |
Severity | Debug |
Message | FixIn_Adapter::getNext() |
Description | FixIn_Adapter::getNext() |
Code | 300005 |
Severity | Debug |
Message | FixIn_Adapter::getFixMessage() |
Description | FixIn_Adapter::getFixMessage() |
Code | 300006 |
Severity | Debug |
Message | FixIn_Adapter::getFixMessageFromFile() |
Description | FixIn_Adapter::getFixMessageFromFile() |
Code | 300007 |
Severity | Info |
Message | Reached end of file :{0} |
Description | Reached end of file :{0} |
Code | 300008 |
Severity | Error |
Message | Cannot read from datasource. |
Description | Cannot read from datasource. |
Code | 300009 |
Severity | Debug |
Message | FixIn_Adapter::getFixMessageFromSocket() |
Description | FixIn_Adapter::getFixMessageFromSocket() |
Code | 300010 |
Severity | Error |
Message | Error reading from socket. |
Description | Error reading from socket. |
Code | 300011 |
Severity | Debug |
Message | FixIn_Adapter::stop() |
Description | FixIn_Adapter::stop() |
Code | 300012 |
Severity | Debug |
Message | FixIn_Adapter::getParams() |
Description | FixIn_Adapter::getParams() |
Code | 300013 |
Severity | Error |
Message | Unknown source type {0} |
Description | Unknown source type {0} |
Code | 300014 |
Severity | Debug |
Message | FixIn_Adapter::canDiscover() |
Description | FixIn_Adapter::canDiscover() |
Code | 300015 |
Severity | Debug |
Message | FixIn_Adapter::discover() |
Description | FixIn_Adapter::discover() |
Code | 300016 |
Severity | Error |
Message | Tag {0} not found in FIX dictionary |
Description | Tag {0} not found in FIX dictionary |
Code | 300017 |
Severity | Debug |
Message | FixIn_Adapter::putNext() |
Description | FixIn_Adapter::putNext() |
Code | 300018 |
Severity | Error |
Message | Cannot open file : {0} |
Description | Cannot open file : {0} |
Code | 300019 |
Severity | Info |
Message | Reached end of file {0} |
Description | Reached end of file {0} |
Code | 300020 |
Severity | Debug |
Message | ~FixOut_Adapter() |
Description | ~FixOut_Adapter() |
Code | 300021 |
Severity | Debug |
Message | FixOut_Adapter::reset() |
Description | FixOut_Adapter::reset() |
Code | 300022 |
Severity | Debug |
Message | FixOut_Adapter::openFileSource() |
Description | FixOut_Adapter::openFileSource() |
Code | 300023 |
Severity | Debug |
Message | FixOut_Adapter::putNext() |
Description | FixOut_Adapter::putNext() |
Code | 300024 |
Severity | Debug |
Message | FixOut_Adapter::WriteToDataSource() |
Description | FixOut_Adapter::WriteToDataSource() |
Code | 300025 |
Severity | Debug |
Message | FixOut_Adapter::writeToFile() |
Description | FixOut_Adapter::writeToFile() |
Code | 300026 |
Severity | Error |
Message | Cannot write to file. |
Description | Cannot write to file. |
Code | 300027 |
Severity | Debug |
Message | FixOut_Adapter::writeToSocket() |
Description | FixOut_Adapter::writeToSocket() |
Code | 300028 |
Severity | Error |
Message | Error writing to socket. |
Description | Error writing to socket. |
Code | 300029 |
Severity | Debug |
Message | FixOut_Adapter::stop() |
Description | FixOut_Adapter::stop() |
Code | 300030 |
Severity | Debug |
Message | FixOut_Adapter::getParams() |
Description | FixOut_Adapter::getParams() |
Code | 300031 |
Severity | Debug |
Message | FixOut_Adapter::canDiscover() |
Description | FixOut_Adapter::canDiscover() |
Code | 300032 |
Severity | Debug |
Message | FixOut_Adapter::getNext() |
Description | FixOut_Adapter::getNext() |
Code | 300033 |
Severity | Debug |
Message | FixOut_Adapter::commitTransaction() |
Description | FixOut_Adapter::commitTransaction() |
Code | 300034 |
Severity | Warning |
Message | Warning: {0} opcode not supported by FIX outbound connector |
Description | Warning: {0} opcode not supported by FIX outbound connector |
Code | 300035 |
Severity | Debug |
Message | AtomReaderBinInputStream::readBytes enter |
Description | AtomReaderBinInputStream::readBytes enter |
Code | 300036 |
Severity | Error |
Message | AtomReader - HTTP Header not encounterd at beginning of data. |
Description | AtomReader - HTTP Header not encounterd at beginning of data. |
Code | 300037 |
Severity | Error |
Message | AtomReader - HTTP Header invalid |
Description | AtomReader - HTTP Header invalid |
Code | 300038 |
Severity | Error |
Message | AtomReader_Adapter::getAtomData(): Read failure: {0} |
Description | AtomReader_Adapter::getAtomData(): Read failure: {0} |
Code | 300039 |
Severity | Debug |
Message | AtomReader_Adapter::reset() |
Description | AtomReader_Adapter::reset() |
Code | 300040 |
Severity | Error |
Message | AtomReader_Adapter::processParams() failed - See previous messages. |
Description | AtomReader_Adapter::processParams() failed - See previous messages. |
Code | 300041 |
Severity | Error |
Message | AtomReader_Adapter::reset() failed - See previous messages. |
Description | AtomReader_Adapter::reset() failed - See previous messages. |
Code | 300042 |
Severity | Error |
Message | AtomReader_Adapter::setupSAXParser() failed - See previous messages. |
Description | AtomReader_Adapter::setupSAXParser() failed - See previous messages. |
Code | 300043 |
Severity | Error |
Message | AtomReader_Adapter::setupIP() failed - See previous messages. |
Description | AtomReader_Adapter::setupIP() failed - See previous messages. |
Code | 300044 |
Severity | Debug |
Message | AtomReader_Adapter::reset() ended |
Description | AtomReader_Adapter::reset() ended |
Code | 300045 |
Severity | Debug |
Message | AtomReader_Adapter::getNext() |
Description | AtomReader_Adapter::getNext() |
Code | 300046 |
Severity | Error |
Message | AtomReader_Adapter::getAtomData() failed |
Description | AtomReader_Adapter::getAtomData() failed |
Code | 300047 |
Severity | Debug |
Message | AtomReader_Adapter::getNext() ended |
Description | AtomReader_Adapter::getNext() ended |
Code | 300048 |
Severity | Debug |
Message | AtomReader_Adapter::cleanup() |
Description | AtomReader_Adapter::cleanup() |
Code | 300049 |
Severity | Debug |
Message | AtomReader_Adapter::cleanup ended |
Description | AtomReader_Adapter::cleanup ended |
Code | 300050 |
Severity | Debug |
Message | AtomReader_Adapter::start() |
Description | AtomReader_Adapter::start() |
Code | 300051 |
Severity | Debug |
Message | Â |
Description | No additional information available. |
Code | 300052 |
Severity | Debug |
Message | AtomReader_Adapter::stop() |
Description | AtomReader_Adapter::stop() |
Code | 300053 |
Severity | Debug |
Message | AtomReader_Adapter::stop() ended |
Description | AtomReader_Adapter::stop() ended |
Code | 300054 |
Severity | Debug |
Message | AtomReader_Adapter::startDocument() |
Description | AtomReader_Adapter::startDocument() |
Code | 300055 |
Severity | Debug |
Message | AtomReader_Adapter::endDocument() |
Description | AtomReader_Adapter::endDocument() |
Code | 300056 |
Severity | Debug |
Message | AtomReader_Adapter::endDocument() ended |
Description | AtomReader_Adapter::endDocument() ended |
Code | 300057 |
Severity | Debug |
Message | AtomReader_Adapter::startCDATA()::- |
Description | AtomReader_Adapter::startCDATA()::- |
Code | 300058 |
Severity | Debug |
Message | AtomReader_Adapter::endCDATA()::- |
Description | AtomReader_Adapter::endCDATA()::- |
Code | 300059 |
Severity | Error |
Message | Message Context: {0} |
Description | Message Context: {0} |
Code | 300060 |
Severity | Debug |
Message | AtomReader_Adapter::resetDocument. |
Description | AtomReader_Adapter::resetDocument. |
Code | 300061 |
Severity | Error |
Message | Atom SAX Parse Serious Error at Line{0} char{1} with message{2} |
Description | Atom SAX Parse Serious Error at Line{0} char{1} with message{2} |
Code | 300062 |
Severity | Error |
Message | Atom SAX Parse Fatal Error at Line{0} char{1} with message{2} |
Description | Atom SAX Parse Fatal Error at Line{0} char{1} with message{2} |
Code | 300063 |
Severity | Error |
Message | Atom SAX Parse warning at Line{0} char{1} with message{2} |
Description | Atom SAX Parse warning at Line{0} char{1} with message{2} |
Code | 300064 |
Severity | Debug |
Message | AtomReader_Adapter::processParams() |
Description | AtomReader_Adapter::processParams() |
Code | 300065 |
Severity | Error |
Message | AtomReader - _dateFormat not supplied. Defaulted to Y-%m-%dT%H:%M:%S |
Description | AtomReader - _dateFormat not supplied. Defaulted to Y-%m-%dT%H:%M:%S |
Code | 300066 |
Severity | Error |
Message | AtomReader - _timestampFormat not supplied. Defaulted to %Y-%m-%dT%H:%M:%S |
Description | AtomReader - _timestampFormat not supplied. Defaulted to %Y-%m-%dT%H:%M:%S |
Code | 300067 |
Severity | Error |
Message | AtomReader - refreshInterval value suspicious, set to 1 minute |
Description | AtomReader - refreshInterval value suspicious, set to 1 minute |
Code | 300068 |
Severity | Error |
Message | AtomReader_Adapter::processParams() failed - URL Value not supplied . |
Description | AtomReader_Adapter::processParams() failed - URL Value not supplied . |
Code | 300069 |
Severity | Notice |
Message | AtomReader - URL Port not supplied. Default set to 80. |
Description | AtomReader - URL Port not supplied. Default set to 80. |
Code | 300070 |
Severity | Error |
Message | AtomReader - Host name length can not be 0 |
Description | AtomReader - Host name length can not be 0 |
Code | 300071 |
Severity | Error |
Message | AtomReader - URL path length is 0, but allowed. |
Description | AtomReader - URL path length is 0, but allowed. |
Code | 300072 |
Severity | Debug |
Message | AtomReader_Adapter::processParams() ended |
Description | AtomReader_Adapter::processParams() ended |
Code | 300073 |
Severity | Debug |
Message | AtomReader_Adapter::resetRowbuffer() |
Description | AtomReader_Adapter::resetRowbuffer() |
Code | 300074 |
Severity | Debug |
Message | AtomReader_Adapter::resetRowbuffer() ended |
Description | AtomReader_Adapter::resetRowbuffer() ended |
Code | 300075 |
Severity | Debug |
Message | AtomReader_Adapter::setupSAXParser() |
Description | AtomReader_Adapter::setupSAXParser() |
Code | 300076 |
Severity | Error |
Message | Error during initialization! Message: {0} |
Description | Error during initialization! Message: {0} |
Code | 300077 |
Severity | Debug |
Message | AtomReader_Adapter::setupSAXParser() ended |
Description | AtomReader_Adapter::setupSAXParser() ended |
Code | 300078 |
Severity | Debug |
Message | AtomReader_Adapter::resetSAXParser() |
Description | AtomReader_Adapter::resetSAXParser() |
Code | 300079 |
Severity | Debug |
Message | AtomReader_Adapter::resetSAXParser() ended |
Description | AtomReader_Adapter::resetSAXParser() ended |
Code | 300080 |
Severity | Debug |
Message | AtomReader_Adapter::pollSleep() |
Description | AtomReader_Adapter::pollSleep() |
Code | 300081 |
Severity | Debug |
Message | AtomReader_Adapter::pollSleep() ended |
Description | AtomReader_Adapter::pollSleep() ended |
Code | 300082 |
Severity | Debug |
Message | AtomReader_Adapter::setupIP() |
Description | AtomReader_Adapter::setupIP() |
Code | 300083 |
Severity | Error |
Message | AtomReader_Adapter::setupIP() open failure: |
Description | AtomReader_Adapter::setupIP() open failure: |
Code | 300084 |
Severity | Debug |
Message | AtomReader_Adapter::setupIP() ended |
Description | AtomReader_Adapter::setupIP() ended |
Code | 300085 |
Severity | Debug |
Message | AtomReader_Adapter::sendIPRequest() |
Description | AtomReader_Adapter::sendIPRequest() |
Code | 300086 |
Severity | Error |
Message | AtomReader_Adapter::sendIPRequest(): Failure: {0} |
Description | AtomReader_Adapter::sendIPRequest(): Failure: {0} |
Code | 300087 |
Severity | Debug |
Message | AtomReader_Adapter::sendIPRequest() ended |
Description | AtomReader_Adapter::sendIPRequest() ended |
Code | 300088 |
Severity | Debug |
Message | AtomReader_Adapter::disconnectIP() |
Description | AtomReader_Adapter::disconnectIP() |
Code | 300089 |
Severity | Debug |
Message | AtomReader_Adapter::disconnectIP() ended |
Description | AtomReader_Adapter::disconnectIP() ended |
Code | 300090 |
Severity | Debug |
Message | AtomReader_Adapter::getAtomData() ended with error |
Description | AtomReader_Adapter::getAtomData() ended with error |
Code | 300091 |
Severity | Debug |
Message | AtomReader_Adapter::getAtomData() ended at eof |
Description | AtomReader_Adapter::getAtomData() ended at eof |
Code | 300092 |
Severity | Debug |
Message | AtomReader_Adapter::getAtomData parseFirst error. No rows returned. Will retry next interval |
Description | AtomReader_Adapter::getAtomData parseFirst error. No rows returned. Will retry next interval |
Code | 300093 |
Severity | Debug |
Message | AtomReader_Adapter::getAtomData() ended |
Description | AtomReader_Adapter::getAtomData() ended |
Code | 300094 |
Severity | Debug |
Message | DBInput_Adapter::reset() Entered |
Description | DBInput_Adapter::reset() Entered |
Code | 300095 |
Severity | Error |
Message | DBInput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed |
Description | DBInput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed |
Code | 300096 |
Severity | Error |
Message | Error(s) encountered in startup parameters. Adapter initialization failed |
Description | Error(s) encountered in startup parameters. Adapter initialization failed |
Code | 300097 |
Severity | Error |
Message | DBInput_Adapter::reset() Connection initialization failed |
Description | DBInput_Adapter::reset() Connection initialization failed |
Code | 300098 |
Severity | Error |
Message | buildPermutation not successful |
Description | buildPermutation not successful |
Code | 300099 |
Severity | Error |
Message | DBInput_Adapter::reset() buildPermutation not successful. Adapter initialization failed |
Description | DBInput_Adapter::reset() buildPermutation not successful. Adapter initialization failed |
Code | 300100 |
Severity | Debug |
Message | DBInput_Adapter::cleanup() |
Description | DBInput_Adapter::cleanup() |
Code | 300101 |
Severity | Error |
Message | DBInput_Adapter::cleanup commit() failed |
Description | DBInput_Adapter::cleanup commit() failed |
Code | 300102 |
Severity | Debug |
Message | DBInput_Adapter::cleanup ended |
Description | DBInput_Adapter::cleanup ended |
Code | 300103 |
Severity | Debug |
Message | DBInput_Adapter::stop() |
Description | DBInput_Adapter::stop() |
Code | 300104 |
Severity | Debug |
Message | DBInput_Adapter::stop() ended |
Description | DBInput_Adapter::stop() ended |
Code | 300105 |
Severity | Debug |
Message | DBInput_Adapter stopped in getNext() |
Description | DBInput_Adapter stopped in getNext() |
Code | 300106 |
Severity | Error |
Message | DBInput_Adapter::getNext() nextResultSet not successful. |
Description | DBInput_Adapter::getNext() nextResultSet not successful. |
Code | 300107 |
Severity | Error |
Message | DBInput_Adapter::getNext() getResultSet() not successful. |
Description | DBInput_Adapter::getNext() getResultSet() not successful. |
Code | 300108 |
Severity | Error |
Message | DBInput_Adapter::getNext() new result set next() not successful. |
Description | DBInput_Adapter::getNext() new result set next() not successful. |
Code | 300109 |
Severity | Debug |
Message | DBInput_Adapter stopped in getNext()after poll |
Description | DBInput_Adapter stopped in getNext()after poll |
Code | 300110 |
Severity | Error |
Message | DBInput_Adapter::getNext().doStatementQuery() failed. Attempting to restablish the connection. |
Description | DBInput_Adapter::getNext().doStatementQuery() failed. Attempting to restablish the connection. |
Code | 300111 |
Severity | Error |
Message | DBInput_Adapter::getNext() resetConnection not successful. |
Description | DBInput_Adapter::getNext() resetConnection not successful. |
Code | 300112 |
Severity | Error |
Message | DBInput_Adapter::getNext() getData failed |
Description | DBInput_Adapter::getNext() getData failed |
Code | 300113 |
Severity | Debug |
Message | DBInput_Adapter::discoverTables() Entered |
Description | DBInput_Adapter::discoverTables() Entered |
Code | 300114 |
Severity | Error |
Message | DBInput_Adapter::discoverTables could not get table names |
Description | DBInput_Adapter::discoverTables could not get table names |
Code | 300115 |
Severity | Debug |
Message | DBInput_Adapter::discoverTables() ended normally |
Description | DBInput_Adapter::discoverTables() ended normally |
Code | 300116 |
Severity | Debug |
Message | DBInput_Adapter::discover() Entered |
Description | DBInput_Adapter::discover() Entered |
Code | 300117 |
Severity | Error |
Message | DBInput_Adapter::discover() getTableNumColumns failed |
Description | DBInput_Adapter::discover() getTableNumColumns failed |
Code | 300118 |
Severity | Error |
Message | DBInput_Adapter::discover() ended abnormally |
Description | DBInput_Adapter::discover() ended abnormally |
Code | 300119 |
Severity | Error |
Message | DBInput_Adapter::discover() executeQuery select all query failed - |
Description | DBInput_Adapter::discover() executeQuery select all query failed - |
Code | 300120 |
Severity | Warning |
Message | DBInput_Adapter::discover() table sampled appears to have no data. |
Description | DBInput_Adapter::discover() table sampled appears to have no data. |
Code | 300121 |
Severity | Error |
Message | DBInput_Adapter::discover() sample getData failed |
Description | DBInput_Adapter::discover() sample getData failed |
Code | 300122 |
Severity | Debug |
Message | DBInput_Adapter::resetConnection() Entered |
Description | DBInput_Adapter::resetConnection() Entered |
Code | 300123 |
Severity | Error |
Message | DBInput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed |
Description | DBInput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed |
Code | 300124 |
Severity | Error |
Message | DBInput_Adapter::resetConnection - Error getting connection from service |
Description | DBInput_Adapter::resetConnection - Error getting connection from service |
Code | 300125 |
Severity | Error |
Message | - DBInput_Adapter::resetConnection Adapter initialization failed |
Description | - DBInput_Adapter::resetConnection Adapter initialization failed |
Code | 300126 |
Severity | Error |
Message | DBInput_Adapter::resetConnection() ended abnormally |
Description | DBInput_Adapter::resetConnection() ended abnormally |
Code | 300127 |
Severity | Error |
Message | DBInput_Adapter::resetConnection - executeQuery not successful |
Description | DBInput_Adapter::resetConnection - executeQuery not successful |
Code | 300128 |
Severity | Error |
Message | DBInput_Adapter::resetConnection - Result set for ExecuteQuery not created |
Description | DBInput_Adapter::resetConnection - Result set for ExecuteQuery not created |
Code | 300129 |
Severity | Error |
Message | DBInput_Adapter::resetConnection - This could indicate an invalid query |
Description | DBInput_Adapter::resetConnection - This could indicate an invalid query |
Code | 300130 |
Severity | Warning |
Message | DBInput_Adapter::resetConnection - Stream and result set column count are not equal |
Description | DBInput_Adapter::resetConnection - Stream and result set column count are not equal |
Code | 300131 |
Severity | Debug |
Message | DBInput_Adapter::processParams() Entered |
Description | DBInput_Adapter::processParams() Entered |
Code | 300132 |
Severity | Error |
Message | DBInput_Adapter REQUIRED input 'service' property is empty. |
Description | DBInput_Adapter REQUIRED input 'service' property is empty. |
Code | 300133 |
Severity | Error |
Message | DBInput_Adapter 'query' OR 'table' is required, but both properties are empty. |
Description | DBInput_Adapter 'query' OR 'table' is required, but both properties are empty. |
Code | 300134 |
Severity | Warning |
Message | DBInput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Description | DBInput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Code | 300135 |
Severity | Warning |
Message | DBInput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Description | DBInput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Code | 300136 |
Severity | Notice |
Message | DBInput_Adapter pollperiod is 0. No polling will occur. |
Description | DBInput_Adapter pollperiod is 0. No polling will occur. |
Code | 300137 |
Severity | Warning |
Message | DBInput_Adapter pollperiod not supplied or negative. Defaulted to 2 seconds. |
Description | DBInput_Adapter pollperiod not supplied or negative. Defaulted to 2 seconds. |
Code | 300138 |
Severity | Debug |
Message | DBInput_Adapter::processParams() Ended |
Description | DBInput_Adapter::processParams() Ended |
Code | 300139 |
Severity | Debug |
Message | DBInput_Adapter::buildPermutation() Entered |
Description | DBInput_Adapter::buildPermutation() Entered |
Code | 300140 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() Set permutation string failed. |
Description | DBInput_Adapter::buildPermutation() Set permutation string failed. |
Code | 300141 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() Exited abnormally |
Description | DBInput_Adapter::buildPermutation() Exited abnormally |
Code | 300142 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() getNumColumns failed |
Description | DBInput_Adapter::buildPermutation() getNumColumns failed |
Code | 300143 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() getColumnInfo failed |
Description | DBInput_Adapter::buildPermutation() getColumnInfo failed |
Code | 300144 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() setExternalOrder failed |
Description | DBInput_Adapter::buildPermutation() setExternalOrder failed |
Code | 300145 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() setPlatOrder failed |
Description | DBInput_Adapter::buildPermutation() setPlatOrder failed |
Code | 300146 |
Severity | Error |
Message | DBInput_Adapter::buildPermutation() prepareOrder failed. |
Description | DBInput_Adapter::buildPermutation() prepareOrder failed. |
Code | 300147 |
Severity | Debug |
Message | DBInput_Adapter::buildPermutation() permutation not required |
Description | DBInput_Adapter::buildPermutation() permutation not required |
Code | 300148 |
Severity | Debug |
Message | DBInput_Adapter::buildPermutation() Exited normally |
Description | DBInput_Adapter::buildPermutation() Exited normally |
Code | 300149 |
Severity | Debug |
Message | DBInput_Adapter::discover() ended normally. |
Description | DBInput_Adapter::discover() ended normally. |
Code | 300150 |
Severity | Debug |
Message | DBInput_Adapter::resetConnection() ended normally |
Description | DBInput_Adapter::resetConnection() ended normally |
Code | 300151 |
Severity | Debug |
Message | DBOutput_Adapter::reset() Entered |
Description | DBOutput_Adapter::reset() Entered |
Code | 300152 |
Severity | Error |
Message | DBOutput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed |
Description | DBOutput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed |
Code | 300153 |
Severity | Error |
Message | Error(s) encountered in startup parameters. Adapter initialization failed |
Description | Error(s) encountered in startup parameters. Adapter initialization failed |
Code | 300154 |
Severity | Error |
Message | DBOutput_Adapter::resetConnection - executeQuery not successful - resetConnection() ended abnormally |
Description | DBOutput_Adapter::resetConnection - executeQuery not successful - resetConnection() ended abnormally |
Code | 300155 |
Severity | Error |
Message | buildPermutation not successful |
Description | buildPermutation not successful |
Code | 300156 |
Severity | Error |
Message | DBOutput_Adapter::reset() buildPermutation not successful. Adapter initialization failed |
Description | DBOutput_Adapter::reset() buildPermutation not successful. Adapter initialization failed |
Code | 300157 |
Severity | Error |
Message | DBOutput_Adapter::reset() truncateTable failed |
Description | DBOutput_Adapter::reset() truncateTable failed |
Code | 300158 |
Severity | Debug |
Message | DBOutput_Adapter::reset() Exited |
Description | DBOutput_Adapter::reset() Exited |
Code | 300159 |
Severity | Debug |
Message | DBOutput_Adapter::cleanup() |
Description | DBOutput_Adapter::cleanup() |
Code | 300160 |
Severity | Error |
Message | DBOutput_Adapter::cleanup commit() failed |
Description | DBOutput_Adapter::cleanup commit() failed |
Code | 300161 |
Severity | Debug |
Message | DBOutput_Adapter::cleanup ended |
Description | DBOutput_Adapter::cleanup ended |
Code | 300162 |
Severity | Debug |
Message | DBOutput_Adapter::stop() |
Description | DBOutput_Adapter::stop() |
Code | 300163 |
Severity | Debug |
Message | DBOutput_Adapter::stop() ended |
Description | DBOutput_Adapter::stop() ended |
Code | 300164 |
Severity | Debug |
Message | DBOutput_Adapter::testBatch() |
Description | DBOutput_Adapter::testBatch() |
Code | 300165 |
Severity | Error |
Message | DBOutput_Adapter::testBatch() resetBatch failed |
Description | DBOutput_Adapter::testBatch() resetBatch failed |
Code | 300166 |
Severity | Error |
Message | DBOutput_Adapter::testBatch() addToBatch failed |
Description | DBOutput_Adapter::testBatch() addToBatch failed |
Code | 300167 |
Severity | Error |
Message | DBOutput_Adapter::testBatch() executeBatch failed |
Description | DBOutput_Adapter::testBatch() executeBatch failed |
Code | 300168 |
Severity | Error |
Message | DBOutput_Adapter::clearBatch() failed. Exiting abnormally |
Description | DBOutput_Adapter::clearBatch() failed. Exiting abnormally |
Code | 300169 |
Severity | Error |
Message | DBOutput_Adapter::createBatch() failed. Exiting abnormally |
Description | DBOutput_Adapter::createBatch() failed. Exiting abnormally |
Code | 300170 |
Severity | Error |
Message | DBOutput_Adapter::testBatch() commit failed |
Description | DBOutput_Adapter::testBatch() commit failed |
Code | 300171 |
Severity | Debug |
Message | DBOutput_Adapter::testBatch() ended |
Description | DBOutput_Adapter::testBatch() ended |
Code | 300172 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Entered |
Description | DBOutput_Adapter::putNext() Entered |
Code | 300173 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Stopping - Exited. |
Description | DBOutput_Adapter::putNext() Stopping - Exited. |
Code | 300174 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Row is NULL - Exited. |
Description | DBOutput_Adapter::putNext() Row is NULL - Exited. |
Code | 300175 |
Severity | Error |
Message | DBOutput_Adapter::putNext() fromRow Failed |
Description | DBOutput_Adapter::putNext() fromRow Failed |
Code | 300176 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Exited |
Description | DBOutput_Adapter::putNext() Exited |
Code | 300177 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Insert Statement:{0} |
Description | DBOutput_Adapter::putNext() Insert Statement:{0} |
Code | 300178 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Update Statement: {0} |
Description | DBOutput_Adapter::putNext() Update Statement: {0} |
Code | 300179 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Delete Statement: {0} |
Description | DBOutput_Adapter::putNext() Delete Statement: {0} |
Code | 300180 |
Severity | Error |
Message | DBOutput_Adapter::putNext unknown opcode |
Description | DBOutput_Adapter::putNext unknown opcode |
Code | 300181 |
Severity | Error |
Message | DBOutput_Adapter::putNext() Building SQL or Row Failed - see previous messages |
Description | DBOutput_Adapter::putNext() Building SQL or Row Failed - see previous messages |
Code | 300182 |
Severity | Error |
Message | DBOutput_Adapter::putNext() resetBatch failed with:{0} |
Description | DBOutput_Adapter::putNext() resetBatch failed with:{0} |
Code | 300183 |
Severity | Error |
Message | DBOutput_Adapter::putNext add to batch failed |
Description | DBOutput_Adapter::putNext add to batch failed |
Code | 300184 |
Severity | Error |
Message | DBOutput_Adapter::putNext() executeUpdateSQL Failed - see previous messages |
Description | DBOutput_Adapter::putNext() executeUpdateSQL Failed - see previous messages |
Code | 300185 |
Severity | Debug |
Message | DBOutput_Adapter::putNextKDB() Entered |
Description | DBOutput_Adapter::putNextKDB() Entered |
Code | 300186 |
Severity | Debug |
Message | DBOutput_Adapter::putNextKDB() InsertQ Statement:{0} |
Description | DBOutput_Adapter::putNextKDB() InsertQ Statement:{0} |
Code | 300187 |
Severity | Debug |
Message | DBOutput_Adapter::putNextKDB() UpdateQ Statement:{0} |
Description | DBOutput_Adapter::putNextKDB() UpdateQ Statement:{0} |
Code | 300188 |
Severity | Debug |
Message | DBOutput_Adapter::putNextKDB() DeleteQ Statement:{0} |
Description | DBOutput_Adapter::putNextKDB() DeleteQ Statement:{0} |
Code | 300189 |
Severity | Error |
Message | DBOutput_Adapter::putNextKDB unknown opcode {0} |
Description | DBOutput_Adapter::putNextKDB unknown opcode {0} |
Code | 300190 |
Severity | Error |
Message | DBOutput_Adapter::putNextKDB() executeUpdateSQL Failed - see previous messages |
Description | DBOutput_Adapter::putNextKDB() executeUpdateSQL Failed - see previous messages |
Code | 300191 |
Severity | Debug |
Message | DBOutput_Adapter::putNextKDB() Exited |
Description | DBOutput_Adapter::putNextKDB() Exited |
Code | 300192 |
Severity | Debug |
Message | DBOutput_Adapter::discoverTables() Entered |
Description | DBOutput_Adapter::discoverTables() Entered |
Code | 300193 |
Severity | Error |
Message | DBOutput_Adapter::discoverTables could not get table names |
Description | DBOutput_Adapter::discoverTables could not get table names |
Code | 300194 |
Severity | Debug |
Message | DBOutput_Adapter::discoverTables() Ended |
Description | DBOutput_Adapter::discoverTables() Ended |
Code | 300195 |
Severity | Debug |
Message | DBOutput_Adapter::discover() Entered |
Description | DBOutput_Adapter::discover() Entered |
Code | 300196 |
Severity | Error |
Message | DBOutput_Adapter::discover() passed an invalid (empty) table name |
Description | DBOutput_Adapter::discover() passed an invalid (empty) table name |
Code | 300197 |
Severity | Error |
Message | DBOutput_Adapter::discover() getTableNumColumns failed |
Description | DBOutput_Adapter::discover() getTableNumColumns failed |
Code | 300198 |
Severity | Error |
Message | DBOutput_Adapter::discover() ended abnormally |
Description | DBOutput_Adapter::discover() ended abnormally |
Code | 300199 |
Severity | Error |
Message | DBOutput_Adapter::discover() executeQuery select all query failed - |
Description | DBOutput_Adapter::discover() executeQuery select all query failed - |
Code | 300200 |
Severity | Error |
Message | DBOutput_Adapter::discover() table sampled appears to have no data. |
Description | DBOutput_Adapter::discover() table sampled appears to have no data. |
Code | 300201 |
Severity | Debug |
Message | DBOutput_Adapter::discover() ended normally |
Description | DBOutput_Adapter::discover() ended normally |
Code | 300202 |
Severity | Error |
Message | DBOutput_Adapter::discover() sample getData failed |
Description | DBOutput_Adapter::discover() sample getData failed |
Code | 300203 |
Severity | Debug |
Message | DBOutput_Adapter::purgePending() Entered |
Description | DBOutput_Adapter::purgePending() Entered |
Code | 300204 |
Severity | Error |
Message | DBOutput_Adapter::purgePending() executeBatch() {0} rows were not flushed. executeBatch failed |
Description | DBOutput_Adapter::purgePending() executeBatch() {0} rows were not flushed. executeBatch failed |
Code | 300205 |
Severity | Error |
Message | DBOutput_Adapter::purgePending() executeBatch() returned: {0} rows but we were expecting: {1} rows |
Description | DBOutput_Adapter::purgePending() executeBatch() returned: {0} rows but we were expecting: {1} rows |
Code | 300206 |
Severity | Debug |
Message | DBOutput_Adapter::purgePending() executeBatch() sql statements: {0} rows affected: {1} time: {2} seconds |
Description | DBOutput_Adapter::purgePending() executeBatch() sql statements: {0} rows affected: {1} time: {2} seconds |
Code | 300207 |
Severity | Error |
Message | DBOutput_Adapter::purgePending() executeBatch() error, returned <= 0 rows processed. |
Description | DBOutput_Adapter::purgePending() executeBatch() error, returned <= 0 rows processed. |
Code | 300208 |
Severity | Debug |
Message | DBOutput_Adapter::purgePending() Ended |
Description | DBOutput_Adapter::purgePending() Ended |
Code | 300209 |
Severity | Debug |
Message | DBOutput_Adapter::commitTransaction() Entered |
Description | DBOutput_Adapter::commitTransaction() Entered |
Code | 300210 |
Severity | Error |
Message | DBOutput_Adapter::commitTransaction commit() failed |
Description | DBOutput_Adapter::commitTransaction commit() failed |
Code | 300211 |
Severity | Debug |
Message | DBOutput_Adapter::commitTransaction() Exited |
Description | DBOutput_Adapter::commitTransaction() Exited |
Code | 300212 |
Severity | Debug |
Message | DBOutput_Adapter::putStartSync() Entered |
Description | DBOutput_Adapter::putStartSync() Entered |
Code | 300213 |
Severity | Debug |
Message | DBOutput_Adapter::putStartSync() Exited |
Description | DBOutput_Adapter::putStartSync() Exited |
Code | 300214 |
Severity | Debug |
Message | DBOutput_Adapter::putEndSync() Entered |
Description | DBOutput_Adapter::putEndSync() Entered |
Code | 300215 |
Severity | Debug |
Message | DBOutput_Adapter::putEndSync() Exited |
Description | DBOutput_Adapter::putEndSync() Exited |
Code | 300216 |
Severity | Debug |
Message | DBOutput_Adapter::resetConnection() Entered |
Description | DBOutput_Adapter::resetConnection() Entered |
Code | 300217 |
Severity | Error |
Message | DBOutput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed |
Description | DBOutput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed |
Code | 300218 |
Severity | Error |
Message | DBOutput_Adapter::resetConnection() ended abnormally |
Description | DBOutput_Adapter::resetConnection() ended abnormally |
Code | 300219 |
Severity | Error |
Message | DBOutput_Adapter::resetConnection - Error getting connection from service |
Description | DBOutput_Adapter::resetConnection - Error getting connection from service |
Code | 300220 |
Severity | Error |
Message | - DBOutput_Adapter::resetConnection Adapter initialization failed |
Description | - DBOutput_Adapter::resetConnection Adapter initialization failed |
Code | 300221 |
Severity | Debug |
Message | DBOutput_Adapter::resetConnection() ended normally |
Description | DBOutput_Adapter::resetConnection() ended normally |
Code | 300222 |
Severity | Debug |
Message | DBOutput_Adapter::processParams() Entered |
Description | DBOutput_Adapter::processParams() Entered |
Code | 300223 |
Severity | Error |
Message | DBOutput_Adapter REQUIRED input 'service' property is empty. |
Description | DBOutput_Adapter REQUIRED input 'service' property is empty. |
Code | 300224 |
Severity | Error |
Message | DBOutput_Adapter 'table' is required when not in discovery mode |
Description | DBOutput_Adapter 'table' is required when not in discovery mode |
Code | 300225 |
Severity | Error |
Message | DBOutput_Adapter processParams call to resetConnection failed |
Description | DBOutput_Adapter processParams call to resetConnection failed |
Code | 300226 |
Severity | Error |
Message | Could not create connection for Service: {0} |
Description | Could not create connection for Service: {0} |
Code | 300227 |
Severity | Error |
Message | DBOutput_Adapter::processParams - Error getting connection from service |
Description | DBOutput_Adapter::processParams - Error getting connection from service |
Code | 300228 |
Severity | Error |
Message | - DBOutput_Adapter::processParams Adapter initialization failed |
Description | - DBOutput_Adapter::processParams Adapter initialization failed |
Code | 300229 |
Severity | Debug |
Message | DBOutput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Description | DBOutput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Code | 300230 |
Severity | Debug |
Message | DBOutput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Description | DBOutput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS |
Code | 300231 |
Severity | Debug |
Message | DBOutput_Adapter::processParams() onlyBase and outputBase conflict. outputBase set to true. |
Description | DBOutput_Adapter::processParams() onlyBase and outputBase conflict. outputBase set to true. |
Code | 300232 |
Severity | Debug |
Message | DBOutput_Adapter::processParams() batchLimit NOT Supported by KDB - defaulting to 1 |
Description | DBOutput_Adapter::processParams() batchLimit NOT Supported by KDB - defaulting to 1 |
Code | 300233 |
Severity | Error |
Message | DBOutput_Adapter batchLimit can not be zero or negative |
Description | DBOutput_Adapter batchLimit can not be zero or negative |
Code | 300234 |
Severity | Debug |
Message | DBOutput_Adapter::processParams() Ended |
Description | DBOutput_Adapter::processParams() Ended |
Code | 300235 |
Severity | Debug |
Message | DBOutput_Adapter::buildPermutation() Entered |
Description | DBOutput_Adapter::buildPermutation() Entered |
Code | 300236 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() Set permutation string failed. |
Description | DBOutput_Adapter::buildPermutation() Set permutation string failed. |
Code | 300237 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() Exited abnormally |
Description | DBOutput_Adapter::buildPermutation() Exited abnormally |
Code | 300238 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() getNumColumns failed |
Description | DBOutput_Adapter::buildPermutation() getNumColumns failed |
Code | 300239 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() getColumnInfo failed |
Description | DBOutput_Adapter::buildPermutation() getColumnInfo failed |
Code | 300240 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() setExternalOrder failed |
Description | DBOutput_Adapter::buildPermutation() setExternalOrder failed |
Code | 300241 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() setPlaceOrder failed |
Description | DBOutput_Adapter::buildPermutation() setPlaceOrder failed |
Code | 300242 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() prepareOrder failed. |
Description | DBOutput_Adapter::buildPermutation() prepareOrder failed. |
Code | 300243 |
Severity | Warning |
Message | Output_Adapter::buildPermutation() WARNING Key column(s){0} do not pass through field mapping, may cause duplicate records |
Description | Output_Adapter::buildPermutation() WARNING Key column(s){0} do not pass through field mapping, may cause duplicate records |
Code | 300244 |
Severity | Error |
Message | DBOutput_Adapter::buildPermutation() permutation not required |
Description | DBOutput_Adapter::buildPermutation() permutation not required |
Code | 300245 |
Severity | Debug |
Message | DBOutput_Adapter::buildPermutation() Exited normally |
Description | DBOutput_Adapter::buildPermutation() Exited normally |
Code | 300246 |
Severity | Debug |
Message | DBOutput_Adapter::truncateTable() Entered |
Description | DBOutput_Adapter::truncateTable() Entered |
Code | 300247 |
Severity | Error |
Message | DBOutput_Adapter::truncateTable pre-commit() failed |
Description | DBOutput_Adapter::truncateTable pre-commit() failed |
Code | 300248 |
Severity | Error |
Message | DBOutput_Adapter::truncateTable - tuncate[{0}] not successful |
Description | DBOutput_Adapter::truncateTable - tuncate[{0}] not successful |
Code | 300249 |
Severity | Debug |
Message | DBOutput_Adapter::truncateTable() Ended |
Description | DBOutput_Adapter::truncateTable() Ended |
Code | 300250 |
Severity | Debug |
Message | DBOutput_Adapter::constructInsertQ() Entered |
Description | DBOutput_Adapter::constructInsertQ() Entered |
Code | 300251 |
Severity | Error |
Message | DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Description | DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Code | 300252 |
Severity | Debug |
Message | DBOutput_Adapter::constructInsertQ() Exited |
Description | DBOutput_Adapter::constructInsertQ() Exited |
Code | 300253 |
Severity | Debug |
Message | DBOutput_Adapter::constructUpdateQ() Entered |
Description | DBOutput_Adapter::constructUpdateQ() Entered |
Code | 300254 |
Severity | Error |
Message | DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Description | DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Code | 300255 |
Severity | Debug |
Message | DBOutput_Adapter::constructUpdateQ() Exited |
Description | DBOutput_Adapter::constructUpdateQ() Exited |
Code | 300256 |
Severity | Debug |
Message | DBOutput_Adapter::constructDeleteQ() Entered |
Description | DBOutput_Adapter::constructDeleteQ() Entered |
Code | 300257 |
Severity | Error |
Message | DBOutput_Adapter::constructDeleteQ() ERROR - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Description | DBOutput_Adapter::constructDeleteQ() ERROR - to construct a Q statement, we need the _exportMap to be the same size as out schema. |
Code | 300258 |
Severity | Debug |
Message | DBOutput_Adapter::constructDeleteQ() Exited |
Description | DBOutput_Adapter::constructDeleteQ() Exited |
Code | 300259 |
Severity | Debug |
Message | DBOutput_Adapter::constructInsertSQL() Entered |
Description | DBOutput_Adapter::constructInsertSQL() |
Code | 300260 |
Severity | Debug |
Message | DBOutput_Adapter::constructInsertSQL() Exited |
Description | DBOutput_Adapter::constructInsertSQL() Exited |
Code | 300261 |
Severity | Debug |
Message | DBOutput_Adapter::constructUpdateSQL() Entered |
Description | DBOutput_Adapter::constructUpdateSQL() Entered |
Code | 300262 |
Severity | Debug |
Message | DBOutput_Adapter::constructUpdateSQL() Exited |
Description | DBOutput_Adapter::constructUpdateSQL() Exited |
Code | 300263 |
Severity | Debug |
Message | DBOutput_Adapter::constructDeleteSQL() Entered |
Description | DBOutput_Adapter::constructDeleteSQL() Entered |
Code | 300264 |
Severity | Debug |
Message | DBOutput_Adapter::constructDeleteSQL() Exited |
Description | DBOutput_Adapter::constructDeleteSQL() Exited |
Code | 300265 |
Severity | Debug |
Message | DBOutput_Adapter::executeUpdateSQL() Entered |
Description | DBOutput_Adapter::executeUpdateSQL() Entered |
Code | 300266 |
Severity | Error |
Message | DBOutput_Adapter::executeUpdateSQL() executeUpdate not successful for [{0}] update count of: {1} |
Description | DBOutput_Adapter::executeUpdateSQL() executeUpdate not successful for [{0}] update count of: {1} |
Code | 300267 |
Severity | Debug |
Message | DBOutput_Adapter::executeUpdateSQL()Query update/insert row count: {0} |
Description | DBOutput_Adapter::executeUpdateSQL()Query update/insert row count: {0} |
Code | 300268 |
Severity | Error |
Message | DBOutput_Adapter::executeUpdateSQL() commit not successful |
Description | DBOutput_Adapter::executeUpdateSQL() commit not successful |
Code | 300269 |
Severity | Debug |
Message | DBOutput_Adapter::executeUpdateSQL() Exited |
Description | DBOutput_Adapter::executeUpdateSQL() Exited |
Code | 300270 |
Severity | Debug |
Message | DBOutput_Adapter::ORIGexecuteUpdateSQL() Entered |
Description | DBOutput_Adapter::ORIGexecuteUpdateSQL() Entered |
Code | 300271 |
Severity | Error |
Message | DBOutput_Adapter::ORIGexecuteUpdateSQL() executeUpdate not successful for [{0}] update count of: {1} |
Description | DBOutput_Adapter::ORIGexecuteUpdateSQL() executeUpdate not successful for [{0}] update count of: {1} |
Code | 300272 |
Severity | Debug |
Message | DBOutput_Adapter::ORIGexecuteUpdateSQL()Query update/insert row count: {0} |
Description | DBOutput_Adapter::ORIGexecuteUpdateSQL()Query update/insert row count: {0} |
Code | 300273 |
Severity | Error |
Message | DBOutput_Adapter::ORIGexecuteUpdateSQL() commit not successful |
Description | DBOutput_Adapter::ORIGexecuteUpdateSQL() commit not successful |
Code | 300274 |
Severity | Debug |
Message | DBOutput_Adapter::ORIGexecuteUpdateSQL() Exited |
Description | DBOutput_Adapter::ORIGexecuteUpdateSQL() Exited |
Code | 300275 |
Severity | Debug |
Message | DBOutput_Adapter::resetBatch() Entered |
Description | DBOutput_Adapter::resetBatch() Entered |
Code | 300276 |
Severity | Error |
Message | DBOutput_Adapter::clearBatch() failed. Exiting abnormally |
Description | DBOutput_Adapter::clearBatch() failed. Exiting abnormally |
Code | 300277 |
Severity | Debug |
Message | DBOutput_Adapter::resetBatch() Exited |
Description | DBOutput_Adapter::resetBatch() Exited |
Code | 300278 |
Severity | Error |
Message | Unknown element in conversion mapping string < {0} > |
Description | Unknown element in conversion mapping string < {0} > |
Code | 300279 |
Severity | Debug |
Message | DBOutput_Adapter::putNext() Exited |
Description | DBOutput_Adapter::putNext() Exited |
Code | 300280 |
Severity | Debug |
Message | ~JmsInAdapter() |
Description | ~JmsInAdapter() |
Code | 300281 |
Severity | Debug |
Message | JmsInAdapter::reset() |
Description | JmsInAdapter::reset() |
Code | 300282 |
Severity | Debug |
Message | JmsInAdapter::canDiscover() |
Description | JmsInAdapter::canDiscover() |
Code | 300283 |
Severity | Debug |
Message | JmsInAdapter::getNext() |
Description | JmsInAdapter::getNext() |
Code | 300284 |
Severity | Debug |
Message | JmsInAdapter: rowBuf->size() == 0 |
Description | JmsInAdapter: rowBuf->size() == 0 |
Code | 300285 |
Severity | Debug |
Message | JmsInAdapter::putNext() |
Description | JmsInAdapter::putNext() |
Code | 300286 |
Severity | Debug |
Message | JmsInAdapter::stop() |
Description | JmsInAdapter::stop() |
Code | 300287 |
Severity | Debug |
Message | JmsInAdapter::parseCsvMessage() |
Description | JmsInAdapter::parseCsvMessage() |
Code | 300288 |
Severity | Error |
Message | Message {0} contains no stream name |
Description | Message {0} contains no stream name |
Code | 300289 |
Severity | Error |
Message | Message {0} contains no stream opcode |
Description | Message {0} contains no stream opcode |
Code | 300290 |
Severity | Debug |
Message | JmsInAdapter::parseCsvMessage() returning |
Description | JmsInAdapter::parseCsvMessage() returning |
Code | 300291 |
Severity | Debug |
Message | JmsInAdapter::parseXmlMessage() |
Description | JmsInAdapter::parseXmlMessage() |
Code | 300292 |
Severity | Error |
Message | Parsing of XML message failed: bad element |
Description | Parsing of XML message failed: bad element |
Code | 300293 |
Severity | Error |
Message | Bad attribute at offset {0} |
Description | Bad attribute at offset {0} |
Code | 300294 |
Severity | Debug |
Message | JmsInAdapter::discover() |
Description | JmsInAdapter::discover() |
Code | 300295 |
Severity | Debug |
Message | JmsInAdapter::discoverXml() |
Description | JmsInAdapter::discoverXml() |
Code | 300296 |
Severity | Debug |
Message | JmsInAdapter::discoverCsv() |
Description | JmsInAdapter::discoverCsv() |
Code | 300297 |
Severity | Debug |
Message | JmsInAdapter::discoverFix() |
Description | JmsInAdapter::discoverFix() |
Code | 300298 |
Severity | Error |
Message | Tag %s not found in FIX dictionary |
Description | Tag %s not found in FIX dictionary |
Code | 300299 |
Severity | Debug |
Message | JmsInAdapter::discoverObjectArray() |
Description | JmsInAdapter::discoverObjectArray() |
Code | 300300 |
Severity | Debug |
Message | JmsInAdapter::discoverCustom() |
Description | JmsInAdapter::discoverCustom() |
Code | 300301 |
Severity | Debug |
Message | JmsInAdapter::addRowToDiscovery() |
Description | JmsInAdapter::addRowToDiscovery() |
Code | 300302 |
Severity | Debug |
Message | JmsInAdapter::makeDiscoveredFieldTypes() |
Description | JmsInAdapter::makeDiscoveredFieldTypes() |
Code | 300303 |
Severity | Debug |
Message | JmsInAdapter::makeDiscoveredRows() |
Description | JmsInAdapter::makeDiscoveredRows() |
Code | 300304 |
Severity | Debug |
Message | JmsInAdapter::getParams() |
Description | JmsInAdapter::getParams() |
Code | 300305 |
Severity | Error |
Message | Empty delimiter |
Description | Empty delimiter |
Code | 300306 |
Severity | Error |
Message | Empty converter class name |
Description | Empty converter class name |
Code | 300307 |
Severity | Error |
Message | Unknown data format: {0} |
Description | Unknown data format: {0} |
Code | 300308 |
Severity | Error |
Message | JMS Adapter: No jndiContextFactory specified. |
Description | JMS Adapter: No jndiContextFactory specified. |
Code | 300309 |
Severity | Error |
Message | JMS Adapter: No jndiURL specified. |
Description | JMS Adapter: No jndiURL specified. |
Code | 300310 |
Severity | Debug |
Message | ~JmsOutAdapter() |
Description | ~JmsOutAdapter() |
Code | 300311 |
Severity | Debug |
Message | JmsOutAdapter::reset() |
Description | JmsOutAdapter::reset() |
Code | 300312 |
Severity | Error |
Message | Control Stream not found |
Description | Control Stream not found |
Code | 300313 |
Severity | Debug |
Message | JmsOutAdapter::canDiscover() |
Description | JmsOutAdapter::canDiscover() |
Code | 300314 |
Severity | Debug |
Message | JmsOutAdapter::getNext() |
Description | JmsOutAdapter::getNext() |
Code | 300315 |
Severity | Debug |
Message | JmsOutAdapter::putNext() |
Description | JmsOutAdapter::putNext() |
Code | 300316 |
Severity | Debug |
Message | JmsOutAdapter::commitTransaction() |
Description | JmsOutAdapter::commitTransaction() |
Code | 300317 |
Severity | Debug |
Message | Control Stream update failed |
Description | Control Stream update failed |
Code | 300318 |
Severity | Debug |
Message | JmsOutAdapter::makeCsvMessage() |
Description | JmsOutAdapter::makeCsvMessage() |
Code | 300319 |
Severity | Debug |
Message | JmsOutAdapter::makeXmlMessage() |
Description | JmsOutAdapter::makeXmlMessage() |
Code | 300320 |
Severity | Debug |
Message | Warning: '{0}' opcode not supported by FIX outbound connector |
Description | Warning: '{0}' opcode not supported by FIX outbound connector |
Code | 300321 |
Severity | Debug |
Message | JmsOutAdapter::stop() |
Description | JmsOutAdapter::stop() |
Code | 300322 |
Severity | Debug |
Message | JmsOutAdapter::getParams() |
Description | JmsOutAdapter::getParams() |
Code | 300323 |
Severity | Error |
Message | Empty delimiter |
Description | Empty delimiter |
Code | 300324 |
Severity | Error |
Message | Empty converter class name |
Description | Empty converter class name |
Code | 300325 |
Severity | Error |
Message | Unknown data format: {0} |
Description | Unknown data format: {0} |
Code | 300326 |
Severity | Error |
Message | JMS Output Adapter: No gdKeyColumnName entered for Adapter. |
Description | JMS Output Adapter: No gdKeyColumnName entered for Adapter. |
Code | 300327 |
Severity | Error |
Message | JMS Output Adapter: No opcodeColumnName entered for Adapter. |
Description | JMS Output Adapter: No opcodeColumnName entered for Adapter. |
Code | 300328 |
Severity | Error |
Message | JMS Output Adapter: No truncate stream name entered for Adapter. |
Description | JMS Output Adapter: No truncate stream name entered for Adapter. |
Code | 300329 |
Severity | Error |
Message | JMS Output Adapter: No purge interval entered for Adapter. |
Description | JMS Output Adapter: No purge interval entered for Adapter. |
Code | 300330 |
Severity | Error |
Message | JMS Output Adapter: No batch size entered for Adapter. |
Description | JMS Output Adapter: No batch size entered for Adapter. |
Code | 300331 |
Severity | Error |
Message | Bad column property mapping: {0} |
Description | Bad column property mapping: {0} |
Code | 300332 |
Severity | Error |
Message | Bad column name: {0} |
Description | Bad column name: {0} |
Code | 300333 |
Severity | Debug |
Message | JmsOutAdapter::makeFixMessage() |
Description | JmsOutAdapter::makeFixMessage() |
Code | 300334 |
Severity | Debug |
Message | RandomTupleGenInAdapter.getNext |
Description | RandomTupleGenInAdapter.getNext |
Code | 300335 |
Severity | Debug |
Message | RandomTupleGenInAdapter.getNext end |
Description | RandomTupleGenInAdapter.getNext end |
Code | 300336 |
Severity | Debug |
Message | RandomTupleGenInAdapter.sendOneRow |
Description | RandomTupleGenInAdapter.sendOneRow |
Code | 300337 |
Severity | Debug |
Message | RandomTupleGenInAdapter.sendOneRow end |
Description | RandomTupleGenInAdapter.sendOneRow end |
Code | 300338 |
Severity | Debug |
Message | RandomTupleGenInAdapter.start() |
Description | RandomTupleGenInAdapter.start() |
Code | 300339 |
Severity | Debug |
Message | RandomTupleGenInAdapter.start() ended |
Description | RandomTupleGenInAdapter.start() ended |
Code | 300340 |
Severity | Debug |
Message | RandomTupleGenInAdapter.stop() |
Description | RandomTupleGenInAdapter.stop() |
Code | 300341 |
Severity | Debug |
Message | RandomTupleGenInAdapter.stop() ended |
Description | RandomTupleGenInAdapter.stop() ended |
Code | 300342 |
Severity | Debug |
Message | RandomTupleGenInAdapter.reset |
Description | RandomTupleGenInAdapter.reset |
Code | 300343 |
Severity | Error |
Message | Rate has an invalid value:{0} |
Description | Rate has an invalid value:{0} |
Code | 300344 |
Severity | Warning |
Message | {0} is larger than Rate Maxmium and set to Rate Maxmium {1} |
Description | {0} is larger than Rate Maxmium and set to Rate Maxmium {1} |
Code | 300345 |
Severity | Info |
Message | Rate does not exist and set it to default: {0} |
Description | Rate does not exist and set it to default: {0} |
Code | 300346 |
Severity | Error |
Message | RowCount has an invalid value: {0} |
Description | RowCount has an invalid value: {0} |
Code | 300347 |
Severity | Warning |
Message | {0} is larger than maxmium RowCount and set it to max RowCount {1} |
Description | {0} is larger than maxmium RowCount and set it to max RowCount {1} |
Code | 300348 |
Severity | Info |
Message | RowCount does not exist, set to default RowCount {0} |
Description | RowCount does not exist, set to default RowCount {0} |
Code | 300349 |
Severity | Error |
Message | TimestampBase has an invalid value: {0} |
Description | TimestampBase has an invalid value: {0} |
Code | 300350 |
Severity | Info |
Message | use current time as TimestampBase |
Description | use current time as TimestampBase |
Code | 300351 |
Severity | Debug |
Message | RandomTupleGenInAdapter.reset end |
Description | RandomTupleGenInAdapter.reset end |
Code | 300352 |
Severity | Debug |
Message | RandomTupleGenInAdapter.sleepWhile() |
Description | RandomTupleGenInAdapter.sleepWhile() |
Code | 300353 |
Severity | Debug |
Message | RandomTupleGenInAdapter.sleepWhile() end |
Description | RandomTupleGenInAdapter.sleepWhile() end |
Code | 300354 |
Severity | Error |
Message | Non supported type {0} in {1} |
Description | Non supported type {0} in {1} |
Code | 300355 |
Severity | Debug |
Message | adding table: |{0}| _md.size() = {1} |
Description | adding table: |{0}| _md.size() = {1} |
Code | 300356 |
Severity | Debug |
Message | table: |{0}| already in map, not adding. |
Description | table: |{0}| already in map, not adding. |
Code | 300357 |
Severity | Debug |
Message | searched, t: | {0} | |
Description | searched, t: | {0} | |
Code | 300358 |
Severity | Error |
Message | collectTag - whitespace may not follow emelent opening < |
Description | collectTag - whitespace may not follow emelent opening < |
Code | 300359 |
Severity | Error |
Message | unknown state: {0} in collectTag. |
Description | unknown state: {0} in collectTag. |
Code | 300360 |
Severity | Error |
Message | docClosedCheck outermost tags must be <discover> ... </discover> |
Description | docClosedCheck outermost tags must be <discover> ... </discover> |
Code | 300361 |
Severity | Error |
Message | saw </discover> without first seeing <discover> |
Description | saw </discover> without first seeing <discover> |
Code | 300362 |
Severity | Error |
Message | parseDiscFile() could not open file: {0} |
Description | parseDiscFile() could not open file: {0} |
Code | 300363 |
Severity | Error |
Message | could not find the name attribute in <table ... > |
Description | could not find the name attribute in <table ... > |
Code | 300364 |
Severity | Error |
Message | saw </table> without a preceeding <table ... > |
Description | saw </table> without a preceeding <table ... > |
Code | 300365 |
Severity | Error |
Message | cannot nest <discover> elements. |
Description | cannot nest <discover> elements. |
Code | 300366 |
Severity | Error |
Message | Parse error, bad tag |{0}| looking for </discover> or <table> |
Description | Parse error, bad tag |{0}| looking for </discover> or <table> |
Code | 300367 |
Severity | Error |
Message | could not find the name attribute in <column ... /> |
Description | could not find the name attribute in <column ... /> |
Code | 300368 |
Severity | Error |
Message | could not find the type attribute in <column ... /> |
Description | could not find the type attribute in <column ... /> |
Code | 300369 |
Severity | Error |
Message | only <column .... /> is supported, withing a <table ...> ... </table> |
Description | only <column .... /> is supported, withing a <table ...> ... </table> |
Code | 300370 |
Severity | Error |
Message | parse error, <column .../> is the only element allowed in a <table> ... </table> construct. |
Description | parse error, <column .../> is the only element allowed in a <table> ... </table> construct. |
Code | 300371 |
Severity | Error |
Message | parsing discover.xml failed. Error: {0} |
Description | parsing discover.xml failed. Error: {0} |
Code | 300372 |
Severity | Error |
Message | parse completed sucessfully. |
Description | parse completed sucessfully. |
Code | 300373 |
Severity | Error |
Message | Fatal error in initializing XML Parser: {0} |
Description | Fatal error in initializing XML Parser: {0} |
Code | 300374 |
Severity | Error |
Message | Failed to open discovery file: {0} |
Description | Failed to open discovery file: {0} |
Code | 300375 |
Severity | Error |
Message | Error parsing file : {0} |
Description | Error parsing file : {0} |
Code | 300376 |
Severity | Error |
Message | Discover xml does not have discover tag as root tag. |
Description | Discover xml does not have discover tag as root tag. |
Code | 300377 |
Severity | Error |
Message | Discover xml does not have an error tag under root discover tag. |
Description | Discover xml does not have an error tag under root discover tag. |
Code | 300378 |
Severity | Error |
Message | Discover xml does not have any error message under error tag. |
Description | Discover xml does not have any error message under error tag. |
Code | 300379 |
Severity | Debug |
Message | SimpleExtAdapter.reset |
Description | SimpleExtAdapter.reset |
Code | 300380 |
Severity | Debug |
Message | SimpleExtAdapter.reset end |
Description | SimpleExtAdapter.reset end |
Code | 300381 |
Severity | Debug |
Message | SimpleExtAdapter.start |
Description | SimpleExtAdapter.start |
Code | 300382 |
Severity | Error |
Message | The execution command {0} returned code: {1} |
Description | The execution command {0} returned code: {1} |
Code | 300383 |
Severity | Debug |
Message | SimpleExtAdapter.start end |
Description | SimpleExtAdapter.start end |
Code | 300384 |
Severity | Error |
Message | Failed to clean up, command '{0}' returned code {1} |
Description | Failed to clean up, command '{0}' returned code {1} |
Code | 300385 |
Severity | Debug |
Message | SimpleExtAdapter.stop |
Description | SimpleExtAdapter.stop |
Code | 300386 |
Severity | Error |
Message | The stop command parameter is empty, stop request ignored |
Description | The stop command parameter is empty, stop request ignored |
Code | 300387 |
Severity | Error |
Message | Failed to stop, command '{0}' returned code {1} |
Description | Failed to stop, command '{0}' returned code {1} |
Code | 300388 |
Severity | Error |
Message | Repeating an attempt to stop |
Description | Repeating an attempt to stop |
Code | 300389 |
Severity | Debug |
Message | SimpleExtAdapter.stop end |
Description | SimpleExtAdapter.stop end |
Code | 300390 |
Severity | Debug |
Message | SimpleExtAdapter.discoverTables |
Description | SimpleExtAdapter.discoverTables |
Code | 300391 |
Severity | Error |
Message | Error: Connection is not enabled for discovery. |
Description | Error: Connection is not enabled for discovery. |
Code | 300392 |
Severity | Error |
Message | Missing parameters for table discovery |
Description | Missing parameters for table discovery |
Code | 300393 |
Severity | Error |
Message | about to call system {0} |
Description | about to call system {0} |
Code | 300394 |
Severity | Error |
Message | returned with res {0} |
Description | returned with res {0} |
Code | 300395 |
Severity | Error |
Message | Failed to discover, command '{0}' returned code {1} |
Description | Failed to discover, command '{0}' returned code {1} |
Code | 300396 |
Severity | Error |
Message | Failed to parse discovery file: {0} |
Description | Failed to parse discovery file: {0} |
Code | 300397 |
Severity | Debug |
Message | parse of file suceeded... |
Description | parse of file suceeded... |
Code | 300398 |
Severity | Error |
Message | parse of file failed... |
Description | parse of file failed... |
Code | 300399 |
Severity | Error |
Message | Failed to parse discovery file: {0} |
Description | Failed to parse discovery file: {0} |
Code | 300400 |
Severity | Debug |
Message | SimpleExtAdapter.discoverTables end |
Description | SimpleExtAdapter.discoverTables end |
Code | 300401 |
Severity | Debug |
Message | SimpleExtAdapter.discover |
Description | SimpleExtAdapter.discover |
Code | 300402 |
Severity | Error |
Message | Failed to discover( {0} ) |
Description | Failed to discover( {0} ) |
Code | 300403 |
Severity | Error |
Message | Failed to discover{0}, table name is not among discovered tables.; |
Description | Failed to discover{0}, table name is not among discovered tables.; |
Code | 300404 |
Severity | Debug |
Message | SimpleExtAdapter.discover end |
Description | SimpleExtAdapter.discover end |
Code | 300405 |
Severity | Debug |
Message | SimpleExtAdapter.processParams |
Description | SimpleExtAdapter.processParams |
Code | 300406 |
Severity | Error |
Message | _discFile template is:{0} |
Description | _discFile template is:{0} |
Code | 300407 |
Severity | Error |
Message | The Execute Command property is empty, can not run |
Description | The Execute Command property is empty, can not run |
Code | 300408 |
Severity | Error |
Message | Can not create parameter file '{0}' : {1} |
Description | Can not create parameter file '{0}' : {1} |
Code | 300409 |
Severity | Error |
Message | Error writing parameter file '{0}' : {1} |
Description | Error writing parameter file '{0}' : {1} |
Code | 300410 |
Severity | Error |
Message | Failed to configure the parameters, command '{0}' returned code: {1} |
Description | Failed to configure the parameters, command '{0}' returned code: {1} |
Code | 300411 |
Severity | Debug |
Message | SimpleExtAdapter.processParams end |
Description | SimpleExtAdapter.processParams end |
Code | 300412 |
Severity | Error |
Message | Unknown file format '{0}' |
Description | Unknown file format '{0}' |
Code | 300413 |
Severity | Debug |
Message | ~SmtpOut_Adapter() |
Description | ~SmtpOut_Adapter() |
Code | 300414 |
Severity | Debug |
Message | SmtpOut_Adapter::reset() |
Description | SmtpOut_Adapter::reset() |
Code | 300415 |
Severity | Debug |
Message | SmtpOut_Adapter::canDiscover() |
Description | SmtpOut_Adapter::canDiscover() |
Code | 300416 |
Severity | Debug |
Message | SmtpOut_Adapter::getNext() |
Description | SmtpOut_Adapter::getNext() |
Code | 300417 |
Severity | Debug |
Message | SmtpOut_Adapter::putNext() |
Description | SmtpOut_Adapter::putNext() |
Code | 300418 |
Severity | Debug |
Message | SmtpOut_Adapter::commitTransaction() |
Description | SmtpOut_Adapter::commitTransaction() |
Code | 300419 |
Severity | Debug |
Message | SmtpOut_Adapter::stop() |
Description | SmtpOut_Adapter::stop() |
Code | 300420 |
Severity | Debug |
Message | SmtpOut_Adapter::getParams() |
Description | SmtpOut_Adapter::getParams() |
Code | 300421 |
Severity | Error |
Message | No JVM instance found |
Description | No JVM instance found |
Code | 300422 |
Severity | Error |
Message | Cannot attach thread to JVM |
Description | Cannot attach thread to JVM |
Code | 300423 |
Severity | Error |
Message | ERROR: Configuration file argument cannot be empty. |
Description | ERROR: Configuration file argument cannot be empty. |
Code | 300424 |
Severity | Error |
Message | ERROR: The field seperator cannot be more than one character long. |
Description | ERROR: The field seperator cannot be more than one character long. |
Code | 300425 |
Severity | Error |
Message | ERROR: Must specify the user name if using Pam or Kerberos authentication. |
Description | ERROR: Must specify the user name if using Pam or Kerberos authentication. |
Code | 300426 |
Severity | Error |
Message | The ESP_HOME environment variable has not been set. Set this variable and retry |
Description | The ESP_HOME environment variable has not been set. Set this variable and retry |
Code | 300427 |
Severity | Error |
Message | ERROR: Unable to start the connector using the command line. {0} |
Description | ERROR: Unable to start the connector using the command line. {0} |
Code | 300428 |
Severity | Error |
Message | ERROR: Unable to start the connector using the command line(Error {0}). {1} |
Description | ERROR: Unable to start the connector using the command line(Error {0}). {1} |
Code | 300429 |
Severity | Error |
Message | The argument list exceeds the system limit. |
Description | The argument list exceeds the system limit. |
Code | 300430 |
Severity | Error |
Message | The specified file has a locking or sharing violation. |
Description | The specified file has a locking or sharing violation. |
Code | 300431 |
Severity | Error |
Message | The file or path name not found. |
Description | The file or path name not found. |
Code | 300432 |
Severity | Error |
Message | Not enough memory is available to execute the adapter. |
Description | Not enough memory is available to execute the adapter. |
Code | 300433 |
Severity | Error |
Message | ERROR: Unable to start the connector using the command line. {0} {1} |
Description | ERROR: Unable to start the connector using the command line. {0} {1} |
Code | 300434 |
Severity | Warning |
Message | WARNING: The external esp_iqloader process was stopped before the stop request was made. |
Description | WARNING: The external esp_iqloader process was stopped before the stop request was made. |
Code | 300435 |
Severity | Warning |
Message | WARNING: Error {0} occured when trying to stop the external esp_iqloader process. Ignoring it. |
Description | WARNING: Error {0} occured when trying to stop the external esp_iqloader process. Ignoring it. |
Code | 300436 |
Severity | Warning |
Message | WARNING: The process {0} has not stopped in 5 seconds. Retrying...{1} |
Description | WARNING: The process {0} has not stopped in 5 seconds. Retrying...{1} |
Code | 300437 |
Severity | Warning |
Message | WARNING: Unable to stop the process {0}. Forcefully terminating it. |
Description | WARNING: Unable to stop the process {0}. Forcefully terminating it. |
Code | 300438 |
Severity | Error |
Message | Error {0} occured while trying to determine if process is running. |
Description | Error {0} occured while trying to determine if process is running. |
Code | 300439 |
Severity | Error |
Message | Encountered a complex XML element <{0}>, unsupported |
Description | Encountered a complex XML element <{0}>, unsupported |
Code | 300440 |
Severity | Error |
Message | parseDSV(): could not read a complete line, line: {0} |
Description | parseDSV(): could not read a complete line, line: {0} |
Code | 300441 |
Severity | Error |
Message | parseDSV(): not enough fields, at line: {0} |
Description | parseDSV(): not enough fields, at line: {0} |
Code | 300442 |
Severity | Error |
Message | discoveryDSV(): could not read a complete line |
Description | discoveryDSV(): could not read a complete line |
Code | 300443 |
Severity | Error |
Message | Internal error: parameter '{0}' has an unsupported value '{1}' |
Description | Internal error: parameter '{0}' has an unsupported value '{1}' |
Code | 300444 |
Severity | Error |
Message | Missing parameters for column discovery |
Description | Missing parameters for column discovery |
Code | 300445 |
Severity | Error |
Message | Discovery is not supported for the socket connections. |
Description | Discovery is not supported for the socket connections. |
Code | 300446 |
Severity | Error |
Message | permutation does not match the header line in file:{0} |
Description | permutation does not match the header line in file:{0} |
Code | 300447 |
Severity | Error |
Message | the header in file is: '{0}' |
Description | the header in file is: '{0}' |
Code | 300448 |
Severity | Error |
Message | Internal error: could not get parameter '{0}' |
Description | Internal error: could not get parameter '{0}' |
Code | 300449 |
Severity | Error |
Message | could not get parameter 'file' |
Description | could not get parameter 'file' |
Code | 300450 |
Severity | Error |
Message | reset(): could not read file '{0}' |
Description | reset(): could not read file '{0}' |
Code | 300451 |
Severity | Error |
Message | With a negative port value the ephemeral port file name must be set |
Description | With a negative port value the ephemeral port file name must be set |
Code | 300452 |
Severity | Error |
Message | Must not be empty when port < 0 |
Description | Must not be empty when port < 0 |
Code | 300453 |
Severity | Error |
Message | could not open connection to {0}{1} |
Description | could not open connection to {0}{1} |
Code | 300454 |
Severity | Error |
Message | the host name may not be specified for an incoming socket |
Description | the host name may not be specified for an incoming socket |
Code | 300455 |
Severity | Error |
Message | could not set up the server socket |
Description | could not set up the server socket |
Code | 300456 |
Severity | Error |
Message | Internal error: direction unknown value '{0}' |
Description | Internal error: direction unknown value '{0}' |
Code | 300457 |
Severity | Error |
Message | Internal error: srcType unknown value '{0}' |
Description | Internal error: srcType unknown value '{0}' |
Code | 300458 |
Severity | Error |
Message | no such field in the stream |
Description | no such field in the stream |
Code | 300459 |
Severity | Error |
Message | auto-repeat may not be used together with polling |
Description | auto-repeat may not be used together with polling |
Code | 300460 |
Severity | Error |
Message | Missing parameters for table discovery |
Description | Missing parameters for table discovery |
Code | 300461 |
Severity | Error |
Message | Discovery is not supported for the socket connections. |
Description | Discovery is not supported for the socket connections. |
Code | 300462 |
Severity | Error |
Message | Can not look up files: {0} |
Description | Can not look up files: {0} |
Code | 300463 |
Severity | Error |
Message | unknown value |
Description | unknown value |
Code | 300464 |
Severity | Error |
Message | Internal error: parameter '{0}' has an unsupported value '{1}' |
Description | Internal error: parameter '{0}' has an unsupported value '{1}' |
Code | 300465 |
Severity | Error |
Message | Missing parameters for table discovery |
Description | Missing parameters for table discovery |
Code | 300466 |
Severity | Error |
Message | Discovery is not supported for the socket connections. |
Description | Discovery is not supported for the socket connections. |
Code | 300467 |
Severity | Error |
Message | Discovery is not supported for the socket connections |
Description | Discovery is not supported for the socket connections |
Code | 300468 |
Severity | Error |
Message | Missing parameters for column discovery |
Description | Missing parameters for column discovery |
Code | 300469 |
Severity | Error |
Message | Unable to write the ephemeral port number to '{0}': |
Description | Unable to write the ephemeral port number to '{0}': |
Code | 300470 |
Severity | Error |
Message | Internal error: SocketIo object not created |
Description | Internal error: SocketIo object not created |
Code | 300471 |
Severity | Error |
Message | Internal error: could not get parameter '{0}' |
Description | Internal error: could not get parameter '{0}' |
Code | 300472 |
Severity | Error |
Message | could not get parameter 'file' |
Description | could not get parameter 'file' |
Code | 300473 |
Severity | Error |
Message | With a negative port value the ephemeral port file name must be set |
Description | With a negative port value the ephemeral port file name must be set |
Code | 300474 |
Severity | Error |
Message | Must not be empty when port < 0 |
Description | Must not be empty when port < 0 |
Code | 300475 |
Severity | Error |
Message | the host name may not be specified for an incoming socket |
Description | the host name may not be specified for an incoming socket |
Code | 300476 |
Severity | Error |
Message | Internal error: direction unknown value '{0}' |
Description | Internal error: direction unknown value '{0}' |
Code | 300477 |
Severity | Error |
Message | Internal error: srcType unknown value '{1}' |
Description | Internal error: srcType unknown value '{1}' |
Code | 300478 |
Severity | Error |
Message | the host name may not be specified for an incoming socket |
Description | the host name may not be specified for an incoming socket |
Code | 300479 |
Severity | Error |
Message | stopping on file write error: {0} |
Description | stopping on file write error: {0} |
Code | 300480 |
Severity | Debug |
Message | WebSphere MQ Input Adapter: reset() |
Description | WebSphere MQ Input Adapter: reset() |
Code | 300481 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No Channel entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No Channel entered for MQ Server. |
Code | 300482 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No QueueName entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No QueueName entered for MQ Server. |
Code | 300483 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No QueueManagerName entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No QueueManagerName entered for MQ Server. |
Code | 300484 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No MaxBufferSize entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No MaxBufferSize entered for MQ Server. |
Code | 300485 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No SystemName entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No SystemName entered for MQ Server. |
Code | 300486 |
Severity | Error |
Message | WebSphere MQ Input Adapter: No Port entered for MQ Server. |
Description | WebSphere MQ Input Adapter: No Port entered for MQ Server. |
Code | 300487 |
Severity | Error |
Message | WSMQ In Adapter: Unable to reconnect to MQ. |
Description | WSMQ In Adapter: Unable to reconnect to MQ. |
Code | 300488 |
Severity | Error |
Message | WSMQ In Adapter: MQGET ended with reason code {0} |
Description | WSMQ In Adapter: MQGET ended with reason code {0} |
Code | 300489 |
Severity | Debug |
Message | WSMQ In Adapter: OpenMQChannel() |
Description | WSMQ In Adapter: OpenMQChannel() |
Code | 300490 |
Severity | Error |
Message | WSMQ In Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3} |
Description | WSMQ In Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3} |
Code | 300491 |
Severity | Error |
Message | WSMQ In Adapter: MQCONNX ended with reason code {0} |
Description | WSMQ In Adapter: MQCONNX ended with reason code {0} |
Code | 300492 |
Severity | Error |
Message | WSMQ In Adapter: MQCONNX failed with reason code {0} |
Description | WSMQ In Adapter: MQCONNX failed with reason code {0} |
Code | 300493 |
Severity | Error |
Message | WSMQ In Adapter: MQOPEN unable to open queue for input. Reason: {0} |
Description | WSMQ In Adapter: MQOPEN unable to open queue for input. Reason: {0} |
Code | 300494 |
Severity | Error |
Message | WSMQ In Adapter: MQOPEN unable to open queue for input. |
Description | WSMQ In Adapter: MQOPEN unable to open queue for input. |
Code | 300495 |
Severity | Error |
Message | WSMQ In Adapter: HandleMessage:{0} |
Description | WSMQ In Adapter: HandleMessage:{0} |
Code | 300496 |
Severity | Error |
Message | WSMQ In Adapter: Column size in the received message and the schema do not match. Ignoring this message. |
Description | WSMQ In Adapter: Column size in the received message and the schema do not match. Ignoring this message. |
Code | 300497 |
Severity | Error |
Message | Message contains no stream name |
Description | Message contains no stream name |
Code | 300498 |
Severity | Error |
Message | Stream name in the message received does not match with the name of the stream |
Description | Stream name in the message received does not match with the name of the stream |
Code | 300499 |
Severity | Error |
Message | Message contains no stream opcode |
Description | Message contains no stream opcode |
Code | 300500 |
Severity | Debug |
Message | {0} the column of {1} the row is {2} |
Description | {0} the column of {1} the row is {2} |
Code | 300501 |
Severity | Error |
Message | WSMQ In Adapter: MQCLOSE ended with reason code {0} |
Description | WSMQ In Adapter: MQCLOSE ended with reason code {0} |
Code | 300502 |
Severity | Debug |
Message | WSMQ Out Adapter: putNext() |
Description | WSMQ Out Adapter: putNext() |
Code | 300503 |
Severity | Error |
Message | Control Stream update failed |
Description | Control Stream update failed |
Code | 300504 |
Severity | Debug |
Message | WSMQ Out Adapter: wsmq_send_message(): i_str: {0} |
Description | WSMQ Out Adapter: wsmq_send_message(): i_str: {0} |
Code | 300505 |
Severity | Debug |
Message | WSMQ Out Adapter: wsmq_send_message(): About to run MQPut |
Description | WSMQ Out Adapter: wsmq_send_message(): About to run MQPut |
Code | 300506 |
Severity | Error |
Message | Connection broken. Trying to connect again. |
Description | Connection broken. Trying to connect again. |
Code | 300507 |
Severity | Error |
Message | WSMQ Out Adapter: MQPUT unable to put data. Connection to Websphere MQ broken and unable to reconnect. |
Description | WSMQ Out Adapter: MQPUT unable to put data. Connection to Websphere MQ broken and unable to reconnect. |
Code | 300508 |
Severity | Error |
Message | WSMQ Out Adapter: MQPUT unable to put data. Reason: {0} |
Description | WSMQ Out Adapter: MQPUT unable to put data. Reason: {0} |
Code | 300509 |
Severity | Error |
Message | WSMQ Out Adapter: MQPUT unable to put data. Shutting down adapter. |
Description | WSMQ Out Adapter: MQPUT unable to put data. Shutting down adapter. |
Code | 300510 |
Severity | Error |
Message | WSMQ Out Adapter: MQCLOSE ended with reason code {0} |
Description | WSMQ Out Adapter: MQCLOSE ended with reason code {0} |
Code | 300511 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No Channel entered for MQ Server. |
Description | WebSphere MQ Output Adapter: No Channel entered for MQ Server. |
Code | 300512 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No QueueName entered for MQ Server. |
Description | WebSphere MQ Output Adapter: No QueueName entered for MQ Server. |
Code | 300513 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No QueueManagerName entered for MQ Server. |
Description | WebSphere MQ Output Adapter: No QueueManagerName entered for MQ Server. |
Code | 300514 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No SystemName entered for MQ Server. |
Description | WebSphere MQ Output Adapter: No SystemName entered for MQ Server. |
Code | 300515 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No Port entered for MQ Server |
Description | WebSphere MQ Output Adapter: No Port entered for MQ Server |
Code | 300516 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No gdKeyColumnName entered for Adapter. |
Description | WebSphere MQ Output Adapter: No gdKeyColumnName entered for Adapter. |
Code | 300517 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No opcodeColumnName entered for Adapter. |
Description | WebSphere MQ Output Adapter: No opcodeColumnName entered for Adapter. |
Code | 300518 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No truncate stream name entered for Adapter. |
Description | WebSphere MQ Output Adapter: No truncate stream name entered for Adapter. |
Code | 300519 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No purge interval entered for Adapter. |
Description | WebSphere MQ Output Adapter: No purge interval entered for Adapter. |
Code | 300520 |
Severity | Error |
Message | WebSphere MQ Output Adapter: No batch size entered for Adapter. |
Description | WebSphere MQ Output Adapter: No batch size entered for Adapter. |
Code | 300521 |
Severity | Error |
Message | WebSphere MQ Output Adapter: Unable to Open Websphere MQ Channel. |
Description | WebSphere MQ Output Adapter: Unable to Open Websphere MQ Channel. |
Code | 300522 |
Severity | Debug |
Message | WSMQ Out Adapter: OpenMQChannel() |
Description | WSMQ Out Adapter: OpenMQChannel() |
Code | 300523 |
Severity | Debug |
Message | WSMQ Out Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3} |
Description | WSMQ Out Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3} |
Code | 300524 |
Severity | Error |
Message | WSMQ Out Adapter: MQCONNX ended with reason code {0} |
Description | WSMQ Out Adapter: MQCONNX ended with reason code {0} |
Code | 300525 |
Severity | Error |
Message | WSMQ Out Adapter: MQCONNX failed with reason code {0} |
Description | WSMQ Out Adapter: MQCONNX failed with reason code {0} |
Code | 300526 |
Severity | Error |
Message | WSMQ Out Adapter: MQOPEN unable to open queue for output. Reason: {0} |
Description | WSMQ Out Adapter: MQOPEN unable to open queue for output. Reason: {0} |
Code | 300527 |
Severity | Error |
Message | "WSMQ Out Adapter: MQOPEN unable to open queue for output. |
Description | "WSMQ Out Adapter: MQOPEN unable to open queue for output. |
Code | 300528 |
Severity | Error |
Message | Control Stream update failed |
Description | Control Stream update failed |
Code | 300529 |
Severity | Debug |
Message | DBOutput_Adapter::KDB Data Type not supported for JDBC |
Description | DBOutput_Adapter::KDB JDBC does not support ESP Money(all), bigdatetime or Binary |
Code | 300530 |
Severity | Debug |
Message | DBOutput_Adapter::KDB Does not support NULL for boolean |
Description | DBOutput_Adapter::JDBC does not support NULL boolean values |
Code | 300531 |
Severity | Debug |
Message | DDBOutput_Adapter::rollbackTransaction() Entered |
Description | DBOutput_Adapter::rollbackTransaction() Entered |
Code | 300532 |
Severity | Debug |
Message | DBOutput_Adapter::rollbackTransaction() Exited |
Description | DBOutput_Adapter::rollbackTransaction() Exited |
Code | 300533 |
Severity | Debug |
Message | DBOutput_Adapter::rollbackTransaction() failed with reason code |
Description | DBOutput_Adapter::rollbackTransaction() failed with reason code |
Code | 300534 |
Severity | Debug |
Message | WSMQInAdapter::commitTransaction(). |
Description | WSMQInAdapter::commitTransaction(). |
Code | 300535 |
Severity | Debug |
Message | WSMQInAdapter::commitTransaction() sync point commit. |
Description | WSMQInAdapter::commitTransaction() sync point commit. |
Code | 300536 |
Severity | Error |
Message | JMS Input Adapter: Durable Subscription Mode has been specified for Queue. |
Description | JMS Input Adapter: Durable Subscription Mode is not supported for Queue, its supported only for Topic. |
Code | 300537 |
Severity | Error |
Message | JMS Input Adapter: Client ID required for Durable Topic Subcription has not been specified. |
Description | JMS Input Adapter: Client ID required for Durable Topic Subcription has not been specified. |
Code | 300538 |
Severity | Error |
Message | JMS Input Adapter: Subscription Name required for Durable Topic Subcription has not been specified. |
Description | JMS Input Adapter: Subscription Name required for Durable Topic Subcription has not been specified. |
Code | 300539 |
Severity | Debug |
Message | JmsInAdapter::commitTransaction(). |
Description | JmsInAdapter::commitTransaction(). |
Code | 300540 |
Severity | Debug |
Message | JmsInAdapter::commitTransaction() durable susbcription mode commit. |
Description | JmsInAdapter::commitTransaction() durable susbcription mode commit. |
Code | 300541 |
Severity | Debug |
Message | DBInput_Adapter::reset() Exited. |
Description | DBInput_Adapter::reset() Exited. |
Code | 300542 |
Severity | Notice |
Message | TextIn_Adapter: File {0} processed on {1}. |
Description | TextIn_Adapter: File {0} processed on {1}. |
Code | 300543 |
Severity | Error |
Message | TextIn_Adapter: Error while deleting file {0}. |
Description | TextIn_Adapter: Error while deleting file {0}. |
Code | 300544 |
Severity | Error |
Message | TextIn_Adapter: Conflicting parameters removeAfterProcess & reprocess. Both cannot be set to true. |
Description | TextIn_Adapter: Conflicting parameters removeAfterProcess & reprocess. Both cannot be set to true. |
Code | 300600 |
Severity | Error |
Message | Cannot establish a connection to the IQ Database. |
Description | Cannot establish a connection to the IQ Database. |
Code | 300601 |
Severity | Error |
Message | Cannot establish a connection to the IQ Database. |
Description | Cannot establish a connection to the IQ Database. |
Code | 300602 |
Severity | Error |
Message | Cannot establish a connection to the IQ Database. |
Description | Cannot establish a connection to the IQ Database. |
Code | 300603 |
Severity | Error |
Message | Could not retrieve metadata for the work file table from the odbc driver. |
Description | Could not retrieve metadata for the work file table from the odbc driver. |
Code | 300604 |
Severity | Warning |
Message | Could not close the connection to the IQ database. |
Description | Could not close the connection to the IQ database. |
Code | 300605 |
Severity | Warning |
Message | Unable to remove the information for {0} from the work file table. |
Description | Unable to remove the information for {0} from the work file table. |
Code | 300606 |
Severity | Error |
Message | The service name in the adapter properties is not configured as an ODBC service. The IQ Output Adapter requires an ODBC connection to function. |
Description | The service name in the adapter properties is not configured as an ODBC service. The IQ Output Adapter requires an ODBC connection to function. |
Code | 300607 |
Severity | Error |
Message | Could not add the information for {0} to the work file table. |
Description | Could not add the information for {0} to the work file table. |
Code | 300608 |
Severity | Error |
Message | Could not update the entry in the work file table for {0}. |
Description | Could not update the entry in the work file table for {0}. |
Code | 300609 |
Severity | Error |
Message | Could not update the entry in the work file table for {0}. |
Description | Could not update the entry in the work file table for {0}. |
Code | 300610 |
Severity | Error |
Message | Could not update the entry in the work file table for {0}. |
Description | Could not update the entry in the work file table for {0}. |
Code | 300611 |
Severity | Error |
Message | A persistence file cannot be found nor created in either the primary or secondary locations. Please ensure that there is enough space available and that ESP has permission to write to these directories. |
Description | A persistence file cannot be found nor created in either the primary or secondary locations. Please ensure that there is enough space available and that ESP has permission to write to these directories. |
Code | 300613 |
Severity | Error |
Message | A record in the persistence file cannot be read properly. Please contact Sybase Support. |
Description | A record in the persistence file cannot be read properly. Please contact Sybase Support. |
Code | 300614 |
Severity | Error |
Message | A persistence file cannot be created in either the primary or secondary locations. |
Description | A persistence file cannot be created in either the primary or secondary locations. |
Code | 300615 |
Severity | Error |
Message | An attempt to write to the persistence file has failed. |
Description | An attempt to write to the persistence file has failed. |
Code | 300616 |
Severity | Error |
Message | The data type of the column named {0} is not supported. |
Description | The data type of the column named {0} is not supported. |
Code | 300617 |
Severity | Error |
Message | The adapter was unable to allocate enough memory to process an incomming row. The row will be discarded. |
Description | The adapter was unable to allocate enough memory to process an incomming row. The row will be discarded. |
Code | 300618 |
Severity | Error |
Message | The value destined for the database table column named {0} was NULL. This database column does not allow NULL values, so the current ESP row has been discarded. If the input data cannot be changed, this column should be made nullable in the database, or a default value should be provided for the column. |
Description | The value destined for the database table column named {0} was NULL. This database column does not allow NULL values, so the current ESP row has been discarded. If the input data cannot be changed, this column should be made nullable in the database, or a default value should be provided for the column. |
Code | 300619 |
Severity | Error |
Message | An integer value in an ESP row destined for a tiny integer column in the database was negative. Tiny integers are unsigned values, and can not be negative. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for a tiny integer column in the database was negative. Tiny integers are unsigned values, and can not be negative. The row containing the integer has been discarded. |
Code | 300620 |
Severity | Error |
Message | An integer value in an ESP row destined for a tiny integer column in the database was too large to be represented by a tiny integer. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for a tiny integer column in the database was too large to be represented by a tiny integer. The row containing the integer has been discarded. |
Code | 300621 |
Severity | Error |
Message | An integer value in an ESP row destined for a small integer column in the database was too small to be represented by a small integer. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for a small integer column in the database was too small to be represented by a small integer. The row containing the integer has been discarded. |
Code | 300622 |
Severity | Error |
Message | An integer value in an ESP row destined for a small integer column in the database was too large to be represented by a small integer. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for a small integer column in the database was too large to be represented by a small integer. The row containing the integer has been discarded. |
Code | 300623 |
Severity | Error |
Message | An integer value in an ESP row destined for an unsigned small integer column in the database was negative. Unsigned small integers can not be negative. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for an unsigned small integer column in the database was negative. Unsigned small integers can not be negative. The row containing the integer has been discarded. |
Code | 300624 |
Severity | Error |
Message | An integer value in an ESP row destined for an unsigned small integer column in the database was too large to be represented by an unsigned small integer. The row containing the integer has been discarded. |
Description | An integer value in an ESP row destined for an unsigned small integer column in the database was too large to be represented by an unsigned small integer. The row containing the integer has been discarded. |
Code | 300625 |
Severity | Error |
Message | A long value in an ESP row destined for an unsigned integer column in the database was negative. Unsigned integers can not be negative. The row containing the long has been discarded. |
Description | A long value in an ESP row destined for an unsigned integer column in the database was negative. Unsigned integers can not be negative. The row containing the long has been discarded. |
Code | 300626 |
Severity | Error |
Message | A long value in an ESP row destined for an unsigned integer column in the database was too large to be represented by an unsigned integer. The row containing the long has been discarded. |
Description | A long value in an ESP row destined for an unsigned integer column in the database was too large to be represented by an unsigned integer. The row containing the long has been discarded. |
Code | 300627 |
Severity | Error |
Message | A long value in an ESP row destined for an unsigned big integer column in the database was negative. Unsigned big integers can not be negative. The row containing the long has been discarded. |
Description | A long value in an ESP row destined for an unsigned big integer column in the database was negative. Unsigned big integers can not be negative. The row containing the long has been discarded. |
Code | 300628 |
Severity | Error |
Message | A money value in an ESP row destined for a small money column in the database was too small to be represented by a small money. The row containing the money value has been discarded. |
Description | A money value in an ESP row destined for a small money column in the database was too small to be represented by a small money. The row containing the money value has been discarded. |
Code | 300629 |
Severity | Error |
Message | A money value in an ESP row destined for a small money column in the database was too large to be represented by a small money. The row containing the money value has been discarded. |
Description | A money value in an ESP row destined for a small money column in the database was too large to be represented by a small money. The row containing the money value has been discarded. |
Code | 300630 |
Severity | Error |
Message | A binary value in an ESP row was too large to fit in the destination database column. The row has been discarded. |
Description | A binary value in an ESP row was too large to fit in the destination database column. The row has been discarded. |
Code | 300631 |
Severity | Error |
Message | Internal error: Mapping from ESP type {0} to database type {1} is not recognized. Please contact Sybase support and provide this error message. |
Description | Internal error: Mapping from ESP type {0} to database type {1} is not recognized. Please contact Sybase support and provide this error message. |
Code | 300632 |
Severity | Debug |
Message | # This file is not to be modified manually. It is used to store information for the IQ Output Adapter and is updated programatically. |
Description | # This file is not to be modified manually. It is used to store information for the IQ Output Adapter and is updated programatically. |
Code | 300634 |
Severity | Error |
Message | Internal error: An IO buffer could not be enqueued on the writer queue. This may be caused by a lack of memory available on the server. |
Description | Internal error: An IO buffer could not be enqueued on the writer queue. This may be caused by a lack of memory available on the server. |
Code | 300635 |
Severity | Warning |
Message | The data file located at {0}/{1} is no longer needed, could not be deleted. Please remove it manually. |
Description | The data file located at {0}/{1} is no longer needed, could not be deleted. Please remove it manually. |
Code | 300636 |
Severity | Error |
Message | The file located at {0}/{1} may not have been marked ready for loading into the IQ database and may need to be manually loaded using a LOAD TABLE command. |
Description | The file located at {0}/{1} may not have been marked ready for loading into the IQ database and may need to be manually loaded using a LOAD TABLE command. |
Code | 300637 |
Severity | Error |
Message | Writing to the data file {0}/{1} failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space exists on the disc. |
Description | Writing to the data file {0}/{1} failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space exists on the disc. |
Code | 300638 |
Severity | Error |
Message | Flushing and closing the data file {0}/{1} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories. |
Description | Flushing and closing the data file {0}/{1} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories. |
Code | 300639 |
Severity | Error |
Message | The creation of the data file {0} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories. |
Description | The creation of the data file {0} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories. |
Code | 300640 |
Severity | Error |
Message | Writing information for the data file {0}/{1} to the persistence file or work file table has failed. Please see the preceeding messages for details. |
Description | Writing information for the data file {0}/{1} to the persistence file or work file table has failed. Please see the preceeding messages for details. |
Code | 300641 |
Severity | Warning |
Message | The primary directory does not have enough space for the target file size. If this problem continues, please increase the space available. |
Description | The primary directory does not have enough space for the target file size. If this problem continues, please increase the space available. |
Code | 300642 |
Severity | Warning |
Message | The secondary directory does not have enough space for the target file size. Please free up space in this directory. |
Description | The secondary directory does not have enough space for the target file size. Please free up space in this directory. |
Code | 300643 |
Severity | Error |
Message | There is not enough space available in either the primary or secondary directory to create a data file. Please allocate more resources to these directories. |
Description | There is not enough space available in either the primary or secondary directory to create a data file. Please allocate more resources to these directories. |
Code | 300644 |
Severity | Error |
Message | An attempt to re-write to a data file has failed. Please ensure that there is enough space in the primary and secondary directories for the data files and that ESP has write permission to these directories. |
Description | An attempt to re-write to a data file has failed. Please ensure that there is enough space in the primary and secondary directories for the data files and that ESP has write permission to these directories. |
Code | 300646 |
Severity | Error |
Message | The primary data directory does not exist. Please check the path and make sure that ESP has access to this directory. |
Description | The primary data directory does not exist. Please check the path and make sure that ESP has access to this directory. |
Code | 300647 |
Severity | Error |
Message | The secondary data directory does not exist. Please check the path and make sure that ESP has access to this directory. |
Description | The secondary data directory does not exist. Please check the path and make sure that ESP has access to this directory. |
Code | 300648 |
Severity | Error |
Message | The configuration values given to the IQ Output Adapter are invalid. Please see the preceeding messages for more details. |
Description | The configuration values given to the IQ Output Adapter are invalid. Please see the preceeding messages for more details. |
Code | 300649 |
Severity | Error |
Message | The IQ Output Adapter cannot open the data file at {0}/{1}. Please ensure that this file exists and that ESP has permission to access it. |
Description | The IQ Output Adapter cannot open the data file at {0}/{1}. Please ensure that this file exists and that ESP has permission to access it. |
Code | 300652 |
Severity | Error |
Message | The IO buffer size for this adapter has been set too low to handle the size of the update and delete transactions being processed by the adapter. Please increase the IO buffer size to accomodate deletes and updates on larger data sets. |
Description | The IO buffer size for this adapter has been set too low to handle the size of the update and delete transactions being processed by the adapter. Please increase the IO buffer size to accomodate deletes and updates on larger data sets. |
Code | 300653 |
Severity | Error |
Message | An internal error has occured that has caused the loss of an IO buffer. The adapter will continue to run but in a diminished capacity and may no longer be able to process messages. Please check the available system memory and restart the ESP server to restore the correct number of IO buffers. |
Description | An internal error has occured that has caused the loss of an IO buffer. The adapter will continue to run but in a diminished capacity and may no longer be able to process messages. Please check the available system memory and restart the ESP server to restore the correct number of IO buffers. |
Code | 300654 |
Severity | Warning |
Message | A string value destined for the database column {0} has a length of {1}, but the database column can support a length of at most {2}. The data will be truncated to fit in the column. |
Description | A string value destined for the database column {0} has a length of {1}, but the database column can support a length of at most {2}. The data will be truncated to fit in the column. |
Code | 300655 |
Severity | Error |
Message | A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number. |
Description | A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number. |
Code | 300656 |
Severity | Error |
Message | The IQ Output Adapter could not load the SQL data file {0}/{1}. |
Description | The IQ Output Adapter could not load the SQL data file {0}/{1}. |
Code | 300657 |
Severity | Error |
Message | The target table name contains double quotes, which are not allowed in IQ table names. |
Description | The target table name contains double quotes, which are not allowed in IQ table names. |
Code | 300658 |
Severity | Error |
Message | An attempt to use quoted identifiers within IQ has failed. The IQ Output Adapter requires this ability. |
Description | An attempt to use quoted identifiers within IQ has failed. The IQ Output Adapter requires this ability. |
Code | 300659 |
Severity | Error |
Message | A money value in an ESP row destined for a decimal/numeric column in the database was too large to be represented given the column's precision. The row containing the money value has been discarded. |
Description | A money value in an ESP row destined for a decimal/numeric column in the database was too large to be represented given the column's precision. The row containing the money value has been discarded. |
Code | 300660 |
Severity | Warning |
Message | The primary and overflow locations are identical. The failover mechanism will not function correctly. |
Description | The primary and overflow locations are identical. The failover mechanism will not function correctly. |
Code | 300661 |
Severity | Warning |
Message | The overflow directory has not been specified. The failover mechanism will not function unless one is provided. |
Description | The overflow directory has not been specified. The failover mechanism will not function unless one is provided. |
Code | 300662 |
Severity | Warning |
Message | The target file size is not a multiple of the IO buffer size. This may produce smaller files than the requested file size. |
Description | The target file size is not a multiple of the IO buffer size. This may produce smaller files than the requested file size. |
Code | 300663 |
Severity | Error |
Message | The target file size is either equal to, or less than, the target IO buffer size. The file size must be larger than the IO buffer size. |
Description | The target file size is either equal to, or less than, the target IO buffer size. The file size must be larger than the IO buffer size. |
Code | 300664 |
Severity | Error |
Message | The IQ Output Adapter could not load the binary data file {0}/{1}. |
Description | The IQ Output Adapter could not load the binary data file {0}/{1}. |
Code | 300665 |
Severity | Error |
Message | The IQ Output Adapter could not complete the data recovery process. Please ensure that the IQ Output Adapter has read and write permissions in both the primary and secondary directories and that no data files have been deleted since shutdown. |
Description | The IQ Output Adapter could not complete the recovery process. Please ensure that the IQ Output Adapter has read and write permissions in both the primary and secondary directories and that no data files have been deleted since shutdown. |
Code | 300666 |
Severity | Warning |
Message | The IQ Output Adapter could not determine the host and port info for the IQ database to which it is connected. The addapter will continue to run but some information may not be available in the Sybase Control Central plugin. |
Description | The IQ Output Adapter could not determine the host and port info for the IQ database to which it is connected. The addapter will continue to run but some information may not be available in the Sybase Control Central plugin. |
Code | 300667 |
Severity | Warning |
Message | A previous instance of the IQ Output adapter was abnormally terminated in the process of writing the data file "{0}" to disk. The adapter will not attempt to recover this file, as it may not be complete. The file should be removed manually. |
Description | A previous instance of the IQ Output adapter was abnormally terminated in the process of writing the data file "{0}" to disk. The adapter will not attempt to recover this file, as it may not be complete. The file should be removed manually. |
Code | 300700 |
Severity | Error |
Message | The opcode is invalid. |
Description | The opcode is invalid. |
Code | 300701 |
Severity | Error |
Message | The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly. |
Description | The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly. |
Code | 300702 |
Severity | Error |
Message | Some of the adapter properties provided are invalid. |
Description | Some of the adapter properties provided are invalid. |
Code | 300703 |
Severity | Error |
Message | Unable to get connection to the database. |
Description | Unable to get connection to the database. |
Code | 300704 |
Severity | Error |
Message | Adapter failed to start because initialization failed. |
Description | Adapter failed to start because initialization failed. |
Code | 300705 |
Severity | Error |
Message | Adapter failed to start because validation of target DB table failed. |
Description | Adapter failed to start because validation of target DB table failed. |
Code | 300706 |
Severity | Error |
Message | Invalid table name was provided for discovery. |
Description | Invalid table name was provided for discovery. |
Code | 300707 |
Severity | Error |
Message | Discovery failed to get number of table columns. |
Description | Discovery failed to get number of table columns. |
Code | 300708 |
Severity | Error |
Message | Discovery of sample data failed. |
Description | Discovery of sample data failed. |
Code | 300709 |
Severity | Error |
Message | Service property is mandatory and cannot be empty. |
Description | Service property is mandatory and cannot be empty. |
Code | 300710 |
Severity | Error |
Message | Table property is required when the adapter is not in discovery mode. |
Description | Table property is required when the adapter is not in discovery mode. |
Code | 300711 |
Severity | Error |
Message | The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly. |
Description | The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly. |
Code | 300712 |
Severity | Error |
Message | Values of onlyBase and outputBase properties are conflicting. |
Description | Values of onlyBase and outputBase properties are conflicting. |
Code | 300713 |
Severity | Error |
Message | The permutation property is invalid. {0} |
Description | The permutation property is invalid. {0} |
Code | 300714 |
Severity | Error |
Message | Unable to get the number of columns for target DB table "{0}". |
Description | Unable to get the number of columns for target DB table "{0}". |
Code | 300715 |
Severity | Error |
Message | When permutation property is not specified then columns in the source stream and target DB table must match. Expected column count for target DB table "{0}" is {1} while the actual column count is {2}. |
Description | When permutation property is not specified then columns in the source stream and target DB table must match. Expected column count for target DB table "{0}" is {1} while the actual column count is {2}. |
Code | 300716 |
Severity | Error |
Message | Unable to get column metadata for target DB table "{0}". |
Description | Unable to get column metadata for target DB table "{0}". |
Code | 300717 |
Severity | Error |
Message | There is no column in the target DB table that matched the name "{0}" specified in the timestampColumnName property. |
Description | There is no column in the target DB table that matched the name "{0}" specified in the timestampColumnName property. |
Code | 300718 |
Severity | Error |
Message | Source stream column "{0}" should not be mapped to the timestamp column "{1}". |
Description | Source stream column "{0}" should not be mapped to the timestamp column "{1}". |
Code | 300719 |
Severity | Error |
Message | Permutation property has no mapping for column "{0}" that is part of the primary key of the source window. |
Description | Permutation property has no mapping for column "{0}" that is part of the primary key of the source window. |
Code | 300720 |
Severity | Error |
Message | The DB column specified in the adapter property "timestampColumnName" needs to have a bigdatetime type. |
Description | The DB column specified in the adapter property "timestampColumnName" needs to have a bigdatetime type. |
Code | 300721 |
Severity | Error |
Message | Unsupported data type for source stream column "{0}". |
Description | Unsupported data type for source stream column "{0}". |
Code | 300722 |
Severity | Error |
Message | Unsupported data type for column "{0}" of target DB table "{1}". |
Description | Unsupported data type for column "{0}" of target DB table "{1}". |
Code | 300723 |
Severity | Error |
Message | The type of target DB column "{0}" is not supported for corresponding source stream column "{1}". |
Description | The type of target DB column "{0}" is not supported for corresponding source stream column "{1}". |
Code | 300724 |
Severity | Error |
Message | Only numeric precision up to 38 is supported in column "{0}" of the target DB table. |
Description | Only numeric precision up to 38 is supported in column "{0}" of the target DB table. |
Code | 300725 |
Severity | Error |
Message | ESP Boolean values can go only into DB string columns of 5 characters long. Check DB table column "{0}". |
Description | ESP Boolean values can go only into DB string columns of 5 characters long. Check DB table column "{0}". |
Code | 300726 |
Severity | Error |
Message | Column "{0}" of the target DB table "{1}" needs to be mapped to a column of the source stream because it has no default value and it not nullable. |
Description | Column "{0}" of the target DB table "{1}" needs to be mapped to a column of the source stream because it has no default value and it not nullable. |
Code | 300727 |
Severity | Error |
Message | Discovering tables failed. |
Description | Discovering tables failed. |
Code | 300728 |
Severity | Error |
Message | DBAccess layer not available. |
Description | DBAccess layer not available. |
Code | 300729 |
Severity | Error |
Message | Unable to establish a DB connection for {0} service. |
Description | Unable to establish a DB connection for {0} service. |
Code | 300730 |
Severity | Error |
Message | When permutation property is not specified then columns in the source stream and target DB table must match. Stream column name is "{0}" while corresponding DB column name is "{1}". |
Description | When permutation property is not specified then columns in the source stream and target DB table must match. Stream column name is "{0}" while corresponding DB column name is "{1}". |
Code | 300800 |
Severity | Error |
Message | The driver library for DB service {0} is expected to be {1}. |
Description | The driver library for DB service {0} is expected to be {1}. |
Code | 300801 |
Severity | Error |
Message | An error occurred when getting a list of columns that have default values set in DB. |
Description | An error occurred when getting a list of columns that have default values set in DB. |
Code | 300802 |
Severity | Error |
Message | Invalid value of bulkBatchSize property. It must be a positive number. |
Description | Invalid value of bulkBatchSize property. It must be a positive number. |
Code | 300803 |
Severity | Error |
Message | Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize. |
Description | Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize. |
Code | 300804 |
Severity | Error |
Message | Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer. |
Description | Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer. |
Code | 300805 |
Severity | Error |
Message | Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive. |
Description | Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive. |
Code | 300806 |
Severity | Error |
Message | Sybase ASE Output adapter cannot start because initialization of the Loader component has failed. |
Description | Sybase ASE Output adapter cannot start because initialization of the Loader component has failed. |
Code | 300807 |
Severity | Error |
Message | Sybase ASE Output adapter failed to execute an update or a delete SQL statement. |
Description | Sybase ASE Output adapter failed to execute an update or a delete SQL statement. |
Code | 300808 |
Severity | Error |
Message | Sybase ASE Output adapter failed to get partition information for target database table "{0}". |
Description | Sybase ASE Output adapter failed to get partition information for target database table "{0}". |
Code | 300809 |
Severity | Error |
Message | Sybase ASE Output adapter cannot start because initialization of a ChildLoader component has failed. |
Description | Sybase ASE Output adapter cannot start because initialization of a ChildLoader component has failed. |
Code | 300810 |
Severity | Error |
Message | Sybase ASE Output adapter was unable to prepare for bulk loading into partition "{0}" of target database table "{1}". |
Description | Sybase ASE Output adapter was unable to prepare for bulk loading into partition "{0}" of target database table "{1}". |
Code | 300811 |
Severity | Error |
Message | Sybase ASE Output adapter failed to transfer {0} rows for bulk loading into the database. |
Description | Sybase ASE Output adapter failed to transfer {0} rows for bulk loading into the database. |
Code | 300812 |
Severity | Error |
Message | Sybase ASE Output adapter failed to bulk load {0} rows into the database. |
Description | Sybase ASE Output adapter failed to bulk load {0} rows into the database. |
Code | 300813 |
Severity | Warning |
Message | Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated. |
Description | Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated. |
Code | 300814 |
Severity | Error |
Message | Invalid ESP data type of output value for column "{0}" of the database table "{1}". |
Description | Invalid ESP data type of output value for column "{0}" of the database table "{1}". |
Code | 300815 |
Severity | Info |
Message | Initialization of Sybase ASE Output adapter loader was successful. Created {0} child loaders. |
Description | Initialization of Sybase ASE Output adapter loader was successful. Created {0} child loaders. |
Code | 300816 |
Severity | Info |
Message | Sybase ASE Output adapter is ready to bulk load partition "{0}" of target database table "{1}". |
Description | Sybase ASE Output adapter is ready to bulk load partition "{0}" of target database table "{1}". |
Code | 300817 |
Severity | Info |
Message | Initializing Sybase ASE Output adapter loader using service "{0}" and target database table "{1}". |
Description | Initializing Sybase ASE Output adapter loader using service "{0}" and target database table "{1}". |
Code | 300818 |
Severity | Info |
Message | Sybase ASE Output adapter initialized successfully using following adapter properties: {0} |
Description | Sybase ASE Output adapter initialized successfully using following adapter properties: {0} |
Code | 300819 |
Severity | Info |
Message | Sybase ASE Output adapter is ready to start processing incoming data. |
Description | Sybase ASE Output adapter is ready to start processing incoming data. |
Code | 300820 |
Severity | Info |
Message | Target database table "{0}" has {1} partition(s) of type "{2}". |
Description | Target database table "{0}" has {1} partition(s) of type "{2}". |
Code | 300821 |
Severity | Error |
Message | Sybase ASE Output adapter discarded a row because conversion failed from ESP to ASE data type for column "{0}" of the database table "{1}". |
Description | Sybase ASE Output adapter discarded a row because conversion failed from ESP to ASE data type for column "{0}" of the database table "{1}". |