Miscellaneous Error Messages
Code |
140000 |
Severity |
Debug |
Message |
SqlParse(): optimizing for key searching. |
Description |
Debugging information that the SQL parser has found a way to optimize the key search. |
Code |
141000 |
Severity |
Critical |
Message |
{0}({1})::FlexStream requires at least one input stream |
Description |
The FlexStream needs one or more input streams. Check and correct the model. |
Code |
141001 |
Severity |
Critical |
Message |
{0}({1})::FlexStream Number of methods must match number of input streams |
Description |
The FlexStream must have exactly one Method for each input stream. |
Code |
141002 |
Severity |
Critical |
Message |
{0}({1})::FlexStream Method refers to unknown input stream {2} |
Description |
The FlexStream must have exactly one Method for each input stream. |
Code |
141003 |
Severity |
Critical |
Message |
{0}({1})::FlexStream More than one method for input stream {2} |
Description |
The FlexStream must have exactly one Method for each input stream. |
Code |
141004 |
Severity |
Critical |
Message |
{0}({1})::FlexStream Parse error in method {2} |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
141005 |
Severity |
Critical |
Message |
{0}({1})::compile() Error in compiling expression: {2}. |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
141006 |
Severity |
Critical |
Message |
{0}({1})::FlexStream Parse error in locals {2} |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
141009 |
Severity |
Critical |
Message |
{0}({1})::FlexStream Parse error in Timer block {2} |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
141010 |
Severity |
Warning |
Message |
FlexStream({0}): Discarding record with null key (tid={1}). |
Description |
The FlexStream calculation has produced a record with a NULL key field. Such records are illegal. Check and correct the model and/or the input data. |
Code |
141011 |
Severity |
Error |
Message |
An IN clause has not been specified for flex operator {0}. |
Description |
Specification of an IN clause is mandatory for a flex operator. |
Code |
141012 |
Severity |
Error |
Message |
An OUT clause has not been specified for flex operator {0}. |
Description |
Specification of an out clause is mandatory for a flex operator. |
Code |
141013 |
Severity |
Error |
Message |
A BEGIN clause has not been specified for flex operator {0}. |
Description |
Specification of a BEGIN clause is mandatory for a flex operator. |
Code |
141014 |
Severity |
Error |
Message |
An END clause has not been specified for flex operator {0}. |
Description |
Specification of an END clause is mandatory for a flex operator. |
Code |
141015 |
Severity |
Error |
Message |
An ON input clause has not been specified for flex operator {0}. |
Description |
Specification of an ON input clause is mandatory for a flex operator. |
Code |
142000 |
Severity |
Info |
Message |
Calendars(): Refreshing calendar data from file {0} |
Description |
Informational message about loading the calendar database. |
Code |
143000 |
Severity |
Debug |
Message |
{0}: [stream :{1}] record diff: opCode: {2}, record: {3} |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the found differences. |
Code |
143001 |
Severity |
Info |
Message |
{0}: [stream :{1}] {2} records of {3} differ, posting diffs to sync stream. |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the found differences. |
Code |
143002 |
Severity |
Info |
Message |
{0}: [stream :{1}] stream empty, diffs not required, pure insert synchronization. |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the found differences. |
Code |
143003 |
Severity |
Critical |
Message |
{0}: [stream: {1}] general gateway exception: {2} |
Description |
The connection of the secondary node of the Hot Spare cluster to the primary node has failed. Check that the primary node is running and that its address is specified correctly. |
Code |
143004 |
Severity |
Info |
Message |
{0}: [stream: {1}] received EXP_START_SYNC |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the found differences. |
Code |
143005 |
Severity |
Info |
Message |
{0}: [stream: {1}] received EXP_END_SYNC |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the found differences. |
Code |
143006 |
Severity |
Info |
Message |
{0}: [stream: {1}] received an exit from feeding stream {2} |
Description |
The primary node of the Hot Spare cluster is exiting. |
Code |
143007 |
Severity |
Critical |
Message |
{0}: [stream: {1}] received an invalid op code (EXP_{START,STOP}_SYNC) while maintaining stream |
Description |
Some self-testing assertion in the Sybase Event Stream Processor has failed, which should never happen. Contact Sybase support if this message appears. |
Code |
143008 |
Severity |
Critical |
Message |
{0}: [stream: {1}] received an invalid op code (EXP_STREAM_EXIT) while syncing stream |
Description |
Some self-testing assertion in the Sybase Event Stream Processor has failed, which should never happen. Contact Sybase support if this message appears. |
Code |
143009 |
Severity |
Critical |
Message |
{0}: [stream: {1}] received a EXP_TRANS outside of [EXP_STREAM_START, EXP_STREAM_END] while syncing stream. |
Description |
Some self-testing assertion in the Sybase Event Stream Processor has failed, which should never happen. Contact Sybase support if this message appears. |
Code |
144002 |
Severity |
Critical |
Message |
HotSpare(initConnections): fault authenticating, exception: {0} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144003 |
Severity |
Critical |
Message |
HotSpare(initConnections): failed to authenticate, errno: {0} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144004 |
Severity |
Critical |
Message |
HotSpare(initConnections): fault obtaining gateway port, exception: {0} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144005 |
Severity |
Critical |
Message |
HotSpare(initConnections): failed to obtain gateway port, errno: {0} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144006 |
Severity |
Critical |
Message |
HotSpare(CheckSourceStreams): failed to find Source Stream {0} in running model. |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144007 |
Severity |
Critical |
Message |
HotSpare(CheckSourceStreams): failed to obtain Source Streams, errno: {0}, errmsg: {1} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144008 |
Severity |
Info |
Message |
HotSpare(execute): start SYNC with primary -- static streams |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the synchronization progress. |
Code |
144009 |
Severity |
Info |
Message |
HotSpare(execute): end SYNC with primary -- static streams |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the synchronization progress. |
Code |
144010 |
Severity |
Info |
Message |
HotSpare(execute): start SYNC with primary -- dynamic streams |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the synchronization progress. |
Code |
144011 |
Severity |
Info |
Message |
HotSpare(execute): end SYNC with primary -- dynamic streams |
Description |
The secondary node of the HotSpare cluster connects to the primary node and starts by synchronizing the contents of its SourceStreams to the ones in the primary node. This is an informational message about the synchronization progress. |
Code |
144012 |
Severity |
Critical |
Message |
HotSpare(execute): failed to set secondary host&port on primary. |
Description |
An intra-cluster communication failed. Check that the primary node is still running. |
Code |
144013 |
Severity |
Critical |
Message |
HotSpare(execute): failed to set redundancy mode on primary. |
Description |
An intra-cluster communication failed. Check that the primary node is still running. |
Code |
144014 |
Severity |
Error |
Message |
HotSpare(execute): detected failed primary, promoting secondary to primary. |
Description |
The failure of the primary node in a Hot Spare cluster is detected. The secondary node will take over. |
Code |
144015 |
Severity |
Notice |
Message |
HotSpare(execute): detected exiting primary, secondary exiting also. |
Description |
The shutdown of the primary node in a Hot Spare cluster is detected. The secondary node will follow with the shutdown. |
Code |
144016 |
Severity |
Info |
Message |
HotSpare(execute): heartbeat: {0} |
Description |
Information about the heartbeat received from the primary node. |
Code |
144017 |
Severity |
Critical |
Message |
HotSpare()::HotSpare(): could not resolve a canonicalize hostname for <{0}> |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144018 |
Severity |
Critical |
Message |
HotSpare()::verify(): fatal error -- XMLrpc->verify failed, status={0}, errorMsg={1} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144019 |
Severity |
Critical |
Message |
HotSpare()::verify(): fatal error -- primary authenticates with: {0}, secondary with: {1} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
144020 |
Severity |
Critical |
Message |
HotSpare()::verify(): primary is not HA capable, exiting. |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
145001 |
Severity |
Critical |
Message |
SyncStream::({0}): for stream ({1}), failure to authenticate, errno: {2} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
145002 |
Severity |
Critical |
Message |
SyncStream::({0}): for stream ({1}), general gateway exception: {2} |
Description |
The connection attempt to another node of the cluster has failed. Check the authentication information provided on the command line. If the model uses the "restrictAccess" attribute, check that it sets the correct permissions for the intra-cluster user id. |
Code |
146001 |
Severity |
Critical |
Message |
{0}::({1}): an input window only supports "records" and "time" for the type attribute. |
Description |
The attribute "type" of am InputWindow must contain either "records" or "time". Check and correct the model. |
Code |
146002 |
Severity |
Info |
Message |
InputWindow::InputWindow() built an Input Window of type: {0}, istream: {1}, value: {2}, slack: {3} |
Description |
Informational message about a defined InputWindow. |
Code |
146003 |
Severity |
Info |
Message |
InputWindow({0})::PurgeList(time) -- deleting {1} rows as {2} transactions. |
Description |
Informational message about InputWindow operation. |
Code |
146004 |
Severity |
Info |
Message |
InputWindow({0})::PurgeList(records) -- deleting {1} rows as {2} transactions. |
Description |
Informational message about InputWindow operation. |
Code |
146005 |
Severity |
Critical |
Message |
InputWindow({0})::InsertRowTime() -- createTimeQueue empty, but record queue is not (error). |
Description |
Some self-testing assertion in the Sybase Event Stream Processor has failed, which should never happen. Contact Sybase support if this message appears. |
Code |
147000 |
Severity |
Warning |
Message |
Breakpoint:: ANY INPUT type requires an empty expression, received: '{0}' |
Description |
A breakpoint on any input stream may not have an expression associated with it, since an expression must be tied to a concrete input stream. You may define a separate breakpoint on each input window with its own expression instead. |
Code |
147001 |
Severity |
Warning |
Message |
Breakpoint:: Parsing error: {0} |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
147002 |
Severity |
Warning |
Message |
Breakpoint:: Compilation error: {0}, in expression '{1}' |
Description |
A syntax error in the expression. Check and correct the argument. |
Code |
148000 |
Severity |
Warning |
Message |
ConnectionReader({0}) exiting, {1} records consumed, {2} read, {3} bad, {4} good. |
Description |
Summary information about a connection. |
Code |
148001 |
Severity |
Warning |
Message |
ConnectionReader({0}) connection reset error: {1} |
Description |
A connection failed to reset. Probably some parameters are specified wrong. Check and correct the model. |
Code |
148002 |
Severity |
Warning |
Message |
ConnectionReader({0}) connection conversion error: {1} |
Description |
The data received by connection can not be converted to the internal format. This indicates a probably bug in the connector. |
Code |
148003 |
Severity |
Warning |
Message |
ConnectionReader({0}) exiting. |
Description |
Informational message that the connection is exiting. |
Code |
148004 |
Severity |
Warning |
Message |
ConnectionReader({0}) connection error: {1} |
Description |
A connection has experienced an error. See the connector description. |
Code |
148005 |
Severity |
Error |
Message |
ConnectionReader({0}) error reading from Connection({1}): {2}. {3} records consumed, {4} read, {5} bad, {6} good. |
Description |
A connection has experienced an error. See the connector description. |
Code |
148010 |
Severity |
Warning |
Message |
ConnectionWriter({0}) exiting, {1} records posted, {2} processed, {3} bad, {4} good. |
Description |
Informational message that the connection is exiting. |
Code |
148011 |
Severity |
Warning |
Message |
ConnectionWriter({0}) connection reset error: {1} |
Description |
A connection failed to reset. Probably some parameters are specified wrong. Check and correct the model. |
Code |
148012 |
Severity |
Warning |
Message |
ConnectionWriter({0}) connection conversion error: {1} |
Description |
The data to be sent to the connection can not be converted from the internal format. This indicates a probably bug in the connector. |
Code |
148013 |
Severity |
Warning |
Message |
ConnectionWriter({0}) exiting. |
Description |
Informational message that the connection is exiting. |
Code |
148014 |
Severity |
Warning |
Message |
ConnectionWriter({0}) connection error: {1} |
Description |
A connection has experienced an error. See the connector description. |
Code |
148015 |
Severity |
Error |
Message |
ConnectionWriter({0}) error writing to Connection({1}): {2}. {3} records posted, {4} processed, {5} bad, {6} good. |
Description |
A connection has experienced an error. See the connector description. |
Code |
149000 |
Severity |
Debug |
Message |
{0}({1})::get() -- key md5 '{2}', record '0x{3}'. |
Description |
Obsolete. |