Increasing the Debug Logging Level

Increase project-level log details to assist with debugging and troubleshooting issues with your projects.

1. In the CCR Project Configuration editor, select the Advanced tab.
2. Click Project Deployment followed by Project Options to navigate to the Debug Level option.
3. Set the log level to a value between 0 and 7, depending on the amout of detail you require. 0 provides the least detail and 7 provides the most. Typically, a value of 4 provides the optimal level of detail debugging projectsIncrease the Debug Level to at least 4, warning conditions.

   Increasing this option to a value of 7 allows the greatest amount of detail to be logged as each of the following level increments log additional detail.

   Name	Level	Description
   LOG_EMERG	0	system is unusable
   LOG_ALERT	1	action must be taken immediately
   LOG_CRIT	2	critical conditions
   LOG_ERR	3	error conditions
   LOG_WARNING	4	warning conditions
   LOG_NOTICE	5	normal but significant condition
   LOG_INFO	6	informational
   LOG_DEBUG	7	debug-level messages

   Note: You will lose your changes to the logging level if you restart the project without also changing the logging level on the Server. After you have made the change, stop and remove the project from the Server, then redeploy the project to activate the new logging level.