Adapter type: toolkit_socket_csv_input. Set these properties for the Socket CSV Input adapter in the ESP Studio adapter properties dialog.
If you use the CCL ATTACH ADAPTER statement to attach an adapter, you must supply the adapter type.
Property Label | Description |
---|---|
Server |
Property ID: host Type: string (Required) Server host name. |
Port |
Propterty ID: port Type: int (Required) Server port. To read from the Ephemeral Port File, set to -1. |
Ephemeral Port File |
Property ID: epFile Type: filename (Advanced) File that will contain the server port number if Port is -1. |
Has Header |
Property ID: csvHasHeader Type: boolean (Advanced) Indicate whether the first line of the file contains the description of the CSV fields. |
Retry Period (seconds) |
Property ID: retryperiod Type: uint (Advanced) Period for trying to re-establish an outgoing connection. |
Buffer Size |
Property ID: inputBufferSize Type: uint (Advanced) The buffer size of the socket connection (bytes). |
Enable TCP keepalive |
Property ID: keepAlive Type: boolean (Advanced) Enable TCP keepalive on the socket connection. |
Charset Name |
Property ID: charsetName Type: string (Advanced) Specify the name of a supported charset. |
Column Delimiter |
Property ID: csvDelimiter Type: string (Advanced) Specify the symbol used to separate the columns. |
Date Format |
Propterty ID: csvDateFormat Type: string (Advanced) Specify the format for parsing date values. |
Timestamp Format |
Property ID: csvTimestampFormat Type: string (Advanced) Specify the format for parsing timestamp values. |
Has Header |
Property ID: csvHasHeader Type: boolean (Advanced) Indicate whether the first line of the file contains the description of the CSV fields. |
Steam name, opcode expected |
Property ID: csvExpectStreamNameOpcode Type: boolean (Optional) If set to true, the adapter interprets the first two fields of the incoming CSV line as stream name and opcode. The adapter discards messages with unmatched values. |
PropertySet |
Property ID: propertyset Type: string (Advanced) Specifies the name of the property set. Property sets are reusable sets of properties that are stored in the project configuration file. Using these sets allows you to move adapter configuration properties out of the CCL file and into the CCR file. If you specify the same properties in the project configuration file and the ATTACH ADAPTER statement, the values in the property set override the values defined in the ATTACH ADAPTER statement. No default value. |