Configure the JMS Object Array Input adapter by specifying values for the ESP connector, formatter, and transporter modules in the adapter configuration file.
Parameter | Description |
---|---|
Log4jProperty |
Type: string (Optional) Specify the path to the log4j.properties logging file you wish to use. The default value is $ESP_HOME/adapters/framework/config/log4j.properties. |
Parameter | Description |
---|---|
Module |
(Required) Section containing all information for this module. It contains a type attribute for specifying the module type. For example, transporter. |
InstanceName |
Type: string (Required) Specify the instance name of the specific module you wish to use. For example, MyInputTransporter. |
Name |
Type: string (Required) The name of the module as defined in the modulesdefine.xml file. For example, <TransporterType>InputTransporter. |
Next |
Type: string (Required) Specify the instance name of the module that follows this one. |
BufferMaxSize |
Type: integer (Advanced) Specify the capacity of the buffer queue between the transporter module and the next module. The default value is 10240. |
Parameters |
(Required) Section containing the JMSInputTransporterParameters element. |
JMSInputTransporterParameters |
(Required) Section containing parameters for the JMS Input transporter. |
ConnectionFactory |
Type: string (Required) Specify the connection factory class name. No default value. |
JndiContextFactory |
Type: string (Required) Specify the context factory for JNDI context initialization. No default value. |
JndiUrl |
Type: string (Required) Specify the JNDI URL. No default value. |
Destination Type |
Type: string (Required) Specify the destination type. Valid values are: QUEUE and TOPIC. The default value is QUEUE. |
DestinationName |
Type: string (Required) Specify the destination name. No default value. |
MessageType |
Type: string (Required) Specify the message type you want the JMS transporter to
process. These types are supported:
|
SubscriptionMode |
Type: string (Optional) Specify the subscription mode for TOPIC (see the Destination Type parameter). Valid values are DURABLE and NONDURABLE. Default value is NONDURABLE. |
ScanDepth |
Type: integer (Optional) Specify the depth of the schema discovery. The adapter reads the number of rows specified by this parameter value when discovering the input data schema. The default value is three. |
ClientID |
Type: string (Required for DURABLE subscription mode only) Specifies the client identifier for a JMS client. Required for creating a durable subscription in JMS. Can be any string, but must be unique for each topic. No default value. Example: client1 . |
SubscriptionName |
Type: string (Required for DURABLE subscription mode only) Specifies a unique name identifying a durable subscription. Required for creating a durable subscription in JMS. Can be any string, but must be unique within a given client ID. No default value. Example: subscription1. |
Parameter | Description |
---|---|
Module |
(Required) Section containing all information for this module. It contains a type attribute for specifying the module type. For example, formatter. |
InstanceName |
Type: string (Required) Specify the instance name of the specific module you wish to use. For example, MyInputTransporter. |
Name |
Type: string (Required) The name of the module as defined in the modulesdefine.xml file. For example, <TransporterType>InputTransporter. |
Next |
Type: string (Required) Specify the instance name of the module that follows this one. |
Parallel |
Type: boolean (Optional) If set to true, the module runs as a separated thread. The default value is true. |
Parameters |
(Required) Section containing the ObjectListToEspFormatterParameters parameter. |
ObjectListToEspFormatterParameters |
(Required) Section containing the Object List to ESP formatter parameters. |
DateFormat |
Type: string (Optional) The format string for parsing date values. For example, yyyy-MM-dd'T'HH:mm:ss. |
TimestampFormat |
Type: string (Optional) Format string for parsing timestamp values. For example, yyyy-MM-dd'T'HH:mm:ss.SSS. |
Parameter | Description |
---|---|
Module |
(Required) Section containing all information for this module. It contains a type attribute for specifying the module type. For example, formatter. |
InstanceName |
Type: string (Required) Specify the instance name of the specific module you wish to use. For example, MyInputTransporter. |
Name |
Type: string (Required) The name of the module as defined in the modulesdefine.xml file. For example, <TransporterType>InputTransporter. |
Parameters |
(Required) Section containing the EspPublisherParameters parameter. |
EspPublisherParameters |
(Required) Section containing parameters for the ESP publisher. |
ProjectName |
Type: string (Required if running adapter in standalone mode; optional if running in managed mode) Name of the ESP project to which the adapter is connected. For example, EspProject2. This is the same project tag that you specify later in the adapter configuration file in the Name parameter of the Event Stream Processor (EspProjects) parameters section. If you are starting the adapter with the ESP project to which it is attached (running the adapter in managed mode), you do not need to set this property as the adapter automatically detects the project name. |
StreamName |
Type: string (Required if running adapter in standalone mode; optional if running in managed mode) Name of the ESP stream to which the adapter publishes data. If you are starting the adapter with the ESP project to which it is attached (running the adapter in managed mode), you do not need to set this property as the adapter automatically detects the stream name. |
MaxPubPoolSize |
Type: positive integer (Optional) Specifies the maximum size of the record pool. Record pooling, also referred to as block or batch publishing, allows for faster publication since there is less overall resource cost in publishing multiple records together compared to publishing records individually. Block publishing (record pooling or batch publishing) is disabled if this value is set to 1. The default value is 256. |
MaxPubPoolTime |
Type: positive integer (Optional) Specifies the maximum period of time, in milliseconds, for which records are pooled before being published. If not set, pooling time is unlimited and the pooling strategy is governed by maxPubPoolSize. No default value. |
UseTransactions |
Type: boolean (Optional) If set to true, pooled messages are published to Event Stream Processor in transactions. If set to false, they are published in envelopes. Default value is false. |
SafeOps |
Type: boolean (Advanced) Converts the opcodes INSERT and UPDATE to UPSERT, and converts DELETE to SAFEDELETE. The default value is false. |
SkipDels |
Type: boolean (Advanced) Skips the rows with opcodes DELETE or SAFEDELETE. The default value is false. |
Event Stream Processor parameters configure communication between Event Stream Processor and the JMS Object List Input adapter.
Parameter | Description |
---|---|
EspProjects |
Section containing parameters for connecting to Event Stream Processor. |
EspProject |
Section containing the Name and Uri parameters. Specifies information for the ESP project to which the adapter is connected. |
Name |
Type: string (Required) Specifies the unique project tag of the ESP project which the espconnector (publisher/subscriber) module references. |
Uri |
Type: string (Required) Specifies the total project URI to connect to the Event Stream Processor cluster. For example, esp://localhost:19011/ws1/p1. |
Security |
Section containing all the authentication parameters below. Specifies details for the authentication method used for Event Stream Processor. |
User |
Type: string (Required) Specifies the user name required to log in to Event Stream Processor (see AuthType). No default value. |
Password |
Type: string (Required) Specifies the password required to log in to Event Stream Processor (see espAuthType). Includes an "encrypted" attribute indicating whether the Password value is encrypted. Default value is false. If set to true, the password value is decrypted using RSAKeyStore and RSAKeyStorePassword. |
AuthType |
Type: string (Required) Specifies method used to authenticate to the
Event Stream Processor. Valid values are:
If the adapter is operated as a Studio plug-in, AuthType is overridden by the Authentication Mode Studio start-up parameter. |
RSAKeyStore |
Type: string (Dependent required) Specifies the location of the RSA keystore, and decrypts the password value. Required if AuthType is set to server_rsa, or the encrypted attribute for Password is set to true, or both. |
RSAKeyStorePassword |
Type:string (Dependent required) Specifies the keystore password, and decrypts the password value. Required if AuthType is set to server_rsa, or the encrypted attribute for Password is set to true, or both. |
KerberosKDC |
Type: string (Dependent required) Specifies host name of Kerberos key distribution center. Required if AuthType is set to kerberos. |
KerberosRealm |
Type: string (Dependent required) Specifies the Kerberos realm setting. Required if AuthType is set to kerberos. |
KerberosService |
Type: string (Dependent required) Specifies the Kerberos principal name that identifies an Event Stream Processor cluster. Required if AuthType is set to kerberos. |
KerberosTicketCache |
Type: string (Dependent required) Specifies the location of the Kerberos ticket cache file. Required if AuthType is set to kerberos. |
EncryptionAlgorithm |
Type: string (Optional) Used when the encrypted attribute for Password is set to true. If left blank, RSA is used as default. |