Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Warning 1000246 | "%1 Rows, %2 Seconds" |
---|---|
Constant | EMSG_CLBK_INSERTJOINNRECS |
SAP Sybase Error Number | 20906 |
SQL State | 01C46 |
SQL Code | 1000246L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | rows |
Parameter 2 | seconds |
Probable Cause | This is an informational message displayed in context with other messages. |
Error 1000246 | "The number of rows loaded: %3, does not match the number of rows unloaded: %2. %1" |
---|---|
Constant | EMSG_ROWCOUNTMISMATCH |
SAP Sybase Error Number | 21016 |
SQL State | QDC52 |
SQL Code | -1000246L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Number of rows of data in all tapes that were read. |
Parameter 3 | Number of rows of data actually loaded by the load command. |
Probable Cause | The number of rows of data on all of the tapes that were loaded does not match the number of rows of data that were unloaded by the LOAD command. |
Warning 1000247 | "Insert into join virtual table '%1' completed in %2 seconds.\n%3 rows inserted (in all)." |
---|---|
Constant | EMSG_CLBK_INSERTJOINTABLEDONE |
SAP Sybase Error Number | 20907 |
SQL State | 01C47 |
SQL Code | 1000247L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | join virtual table name |
Parameter 2 | number of seconds |
Parameter 3 | number of rows inserted |
Probable Cause | This is an informational message. |
Error 1000247 | "The number of blocks loaded: %3, does not match the number of blocks unloaded: %2. %1" |
---|---|
Constant | EMSG_BLOCKCOUNTMISMATCH |
SAP Sybase Error Number | 21017 |
SQL State | QDC54 |
SQL Code | -1000247L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Number of blocks of data in all tapes that were read. |
Parameter 3 | Number of blocks of data actually loaded by the load command. |
Probable Cause | The number of blocks of data on all of the tapes that were loaded does not match the number of blocks of data that were unloaded by the LOAD command. |
Warning 1000248 | "\nJoin virtual table passes started for '%1'.\n" |
---|---|
Constant | EMSG_CLBK_JOINIDXPASSESSTART |
SAP Sybase Error Number | 20908 |
SQL State | 01C48 |
SQL Code | 1000248L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | index name |
Probable Cause | This is an informational message. |
Warning 1000249 | "\nJoin Virtual Table Pass 1 started for '%1'.\n" |
---|---|
Constant | EMSG_CLBK_JOINIDXPASS1START |
SAP Sybase Error Number | 20909 |
SQL State | 01C49 |
SQL Code | 1000249L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | index name |
Probable Cause | This is an informational message. |
Warning 1000250 | "\nJoin virtual table Pass %1 completed for '%2', %3 seconds.\n\t\t%4 rows processed.\n" |
---|---|
Constant | EMSG_CLBK_JOINIDXPASSCOMPLETE |
SAP Sybase Error Number | 20910 |
SQL State | 01C50 |
SQL Code | 1000250L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | pass |
Parameter 2 | index |
Parameter 3 | seconds |
Parameter 4 | rows |
Probable Cause | This is an informational message. |
Warning 1000251 | "\nJoin virtual table passes 1 and 2 complete for '%1' in %2 seconds.\n%3 rows processed.\n" |
---|---|
Constant | EMSG_CLBK_JOINIDXPASS1AND2COMPLETE |
SAP Sybase Error Number | 20911 |
SQL State | 01C51 |
SQL Code | 1000251L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | index name |
Parameter 2 | number of seconds |
Parameter 3 | number of rows processed |
Probable Cause | This is an informational message. |
Error 1000253 | "Cannot drop the constraint '%1'." |
---|---|
Constant | EMSG_ALTER_DROP_CONSTRAINT |
SAP Sybase Error Number | 20913 |
SQL State | QDC53 |
SQL Code | -1000253L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Constraint name. |
Probable Cause | IQ is unable to drop the named constraint because the index associated with the constraint could not be found or opened. |
Warning 1000254 | "\t%1 Rows, JP%2, %3 Seconds" |
---|---|
Constant | EMSG_CLBK_JOINIDXNRECS |
SAP Sybase Error Number | 20914 |
SQL State | 01C54 |
SQL Code | 1000254L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | rows |
Parameter 2 | explanation of %2 |
Parameter 3 | seconds |
Probable Cause | This is an informational message displayed in the context of other messages. |
Warning 1000255 | "Join Record Rejected: '%1', duplicate rows in 1st table. \nRow# %2 & %3, row %4 rejected." |
---|---|
Constant | EMSG_CLBK_JOINIDXRECORDREJECTED |
SAP Sybase Error Number | 20915 |
SQL State | 01C55 |
SQL Code | 1000255L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | rejected record |
Parameter 2 | duplicate row number |
Parameter 3 | duplicate row number |
Parameter 4 | rejected row |
Probable Cause | This is an informational message describing duplicate rows encountered. |
Warning 1000256 | "Join virtual table '%1'. \nTotal rows rejected: %2" |
---|---|
Constant | EMSG_CLBK_JOINIDXREJECTEDTOTAL |
SAP Sybase Error Number | 20916 |
SQL State | 01C56 |
SQL Code | 1000256L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | Join virtual table name |
Parameter 2 | number of records rejected |
Probable Cause | This is an informational message displayed in context with other messages. |
Warning 1000257 | "Delete of %1 rows started for table: " |
---|---|
Constant | EMSG_CLBK_DELETESTART |
SAP Sybase Error Number | 20917 |
SQL State | 00C57 |
SQL Code | 1000257L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | number of rows |
Probable Cause | This is an informational message foretelling the number of rows to be deleted from a table. |
Warning 1000258 | "Portions of the insert/load will be single threaded." |
---|---|
Constant | EMSG_CLBK_INSERT_SINGLE_THREADED1 |
SAP Sybase Error Number | 20918 |
SQL State | QDC58 |
SQL Code | 1000258L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Probable Cause | The load will proceed, but portions of it will be done serially. This can be caused by constraining the amount of memory available to the load with the LOAD_MEMORY_MB option; executing a variable length load without row delimiters; or executing a partial width, variable length load. |
Warning 1000259 | "\nDelete of %1 rows completed for table: %2, %3 seconds." |
---|---|
Constant | EMSG_CLBK_DELETEDONE |
SAP Sybase Error Number | 20919 |
SQL State | 01C59 |
SQL Code | 1000259L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | number of rows deleted |
Parameter 2 | table name |
Parameter 3 | number of seconds to do the delete |
Probable Cause | This is an informational message displayed at the end of a delete. |
Error 1000260 | "ALTER DBSPACE <dbspace-name> ADD <number> is not supported. %1" |
---|---|
Constant | EMSG_ALTER_ADD_NOTSUPPORTED |
SAP Sybase Error Number | 20920 |
SQL State | QDC60 |
SQL Code | -1000260L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | For a Sybase IQ database, one can add space to a database only using the CREATE DBSPACE command. The size of existing dbspaces cannot be changed. |
Error 1000261 | "A Sybase IQ system dbspace, '%2', cannot be renamed. %1" |
---|---|
Constant | EMSG_ALTER_CANT_RENAME_DBSPACE |
SAP Sybase Error Number | 20921 |
SQL State | QDC61 |
SQL Code | -1000261L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace name |
Probable Cause | You cannot rename a dbspace in a Sybase IQ database. |
Error 1000262 | "You cannot specify BLANK PADDING OFF for CREATE DATABASE. %1" |
---|---|
Constant | EMSG_BLANKPADDINGOFF |
SAP Sybase Error Number | 20922 |
SQL State | QDC62 |
SQL Code | -1000262L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Probable Cause | The BLANK PADDING OFF clause is not valid while creating a Sybase IQ database. |
Error 1000263 | "Undo failure for row %2. Statement will rollback to statement before the first insert..values. %1" |
---|---|
Constant | EMSG_UNDO_UNDO_FAILED |
SAP Sybase Error Number | 20973 |
SQL State | QDC63 |
SQL Code | -1000263L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | row for which the 'undo' operation failed |
Probable Cause | There was a unrecoverable error encountered while attempting to undo an 'insert' operation for the specified row. Consequently, the statement now rolls back to the first insert..values statement that occurred since the most recent commit, rollback, or non-insert..values command. |
Error 1000264 | "Ambiguous index name '%2'. Please specify owner. %1" |
---|---|
Constant | EMSG_INDEXAMBIGUOUS |
SAP Sybase Error Number | 21077 |
SQL State | QDB04 |
SQL Code | -1000264L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Name of ambiguous index |
Probable Cause | The specified index name is shared by more than one owner. The owner can be specified as OWNER.TABLE.INDEX |