Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1029 | "Support for materialized views is not available for this database" |
---|---|
Constant | MAT_VIEWS_NOT_SUPPORTED |
SAP Sybase Error Number | 2698 |
SQL State | 0AW15 |
SQL Code | -1029L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | The statement being executed requires support for materialized views, but the database being used does not have the materialized view capability. |
Error 1030 | "Secure HTTP connections are not supported on this platform" |
---|---|
Constant | SECURE_CONNECTION_UNAVAILABLE |
SAP Sybase Error Number | 2699 |
SQL State | WW063 |
SQL Code | -1030L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | A Secure HTTP connection was attempted, but is not supported on this platform. |
Error 1031 | "Syntax error near '%1' -- Materialized view definition must not use the following construct: '%2'" |
---|---|
Constant | MATVIEW_SYNTAX_ERROR |
SAP Sybase Error Number | 2700 |
SQL State | 42WB3 |
SQL Code | -1031L |
ODBC 2 State | 42000 |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the feature used that is not permitted. |
Parameter 2 | The feature used that is not permitted. |
Probable Cause | You attempted to create a materialized view whose definition violates one of the restrictions. |
Error 1032 | "Syntax error near '%1' -- The materialized view cannot be changed to immediate because its definition contains an illegal construct: '%2'" |
---|---|
Constant | UPDATABLE_MATVIEW_SYNTAX_ERROR |
SAP Sybase Error Number | 2701 |
SQL State | 42WB4 |
SQL Code | -1032L |
ODBC 2 State | 42000 |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the feature used that is not permitted. |
Parameter 2 | The feature used that is not permitted. |
Probable Cause | You attempted to change the refresh type to immediate for a materialized view whose definition violates one of the restrictions. |
Error 1033 | "Unable to start database server: Server fatal error" |
---|---|
Constant | UNABLE_TO_START_ENGINE_FATAL_ERROR |
SAP Sybase Error Number | 2702 |
SQL State | 08W89 |
SQL Code | -1033L |
ODBC 2 State | 08001 |
ODBC 3 State | 08001 |
Severity Code | |
Probable Cause | The database server failed to start because a fatal error or assertion failure occurred. More information may be available in the Windows event log or Unix system log or by manually starting the database server. |
Error 1034 | "The '%1' attribute is not valid with procedure type '%2'" |
---|---|
Constant | INVALID_ATTRIBUTE_WITH_TYPE |
SAP Sybase Error Number | 2703 |
SQL State | WW064 |
SQL Code | -1034L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The attribute on the procedure. |
Parameter 2 | The procedure type. |
Probable Cause | This attribute is not applicable to the given procedure type. |
Error 1035 | "LOAD TABLE ... WITH FILE NAME LOGGING not permitted on mirrored database" |
---|---|
Constant | LOAD_TABLE_ON_MIRRORED_DB |
SAP Sybase Error Number | 2704 |
SQL State | WL008 |
SQL Code | -1035L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | LOAD TABLE ... WITH FILE NAME LOGGING statements are not permitted when a database is being mirrored, since the file being loaded might not be accessible by the other server. |
Error 1036 | "The DBN/DBF parameters do not match the database for this alternate server name" |
---|---|
Constant | WRONG_DB_ON_ALT_SERVER_NAME |
SAP Sybase Error Number | 2705 |
SQL State | 08W90 |
SQL Code | -1036L |
ODBC 2 State | 08001 |
ODBC 3 State | 08001 |
Severity Code | |
Probable Cause | The DBN or DBF parameters specified do not match the database using the specified alternate server name. |
Error 1037 | "Cannot drop or modify object '%1' because at least one other object ( %2 '%3') depends upon it" |
---|---|
Constant | OBJECT_HAS_DEPENDENTS |
SAP Sybase Error Number | 2706 |
SQL State | 55W16 |
SQL Code | -1037L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | The name of the object that could not be dropped or modified. |
Parameter 2 | The type of the object that depends on the object that could not be dropped or modified. |
Parameter 3 | The name of the object that depends on the object that could not be dropped or modified. |
Probable Cause | You attempted to drop or modify an object, such as a table or a column, that is used by another object, such as a materialized view, that cannot be automatically invalidated. The dependent object must be disabled or dropped before a drop or modification can be permitted. |
Error 1038 | "Cannot use view '%1' because it has been disabled" |
---|---|
Constant | VIEW_DISABLED |
SAP Sybase Error Number | 2707 |
SQL State | 55W17 |
SQL Code | -1038L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | The name of the view. |
Probable Cause | You attempted to reference a view that has been disabled. The view must be enabled before it can be used again. |
Error 1039 | "Cannot connect to mirror server. Use server name '%1' to find the primary server" |
---|---|
Constant | CONNECTED_TO_MIRROR_SERVER |
SAP Sybase Error Number | 2708 |
SQL State | 08W91 |
SQL Code | -1039L |
ODBC 2 State | 08001 |
ODBC 3 State | 08001 |
Severity Code | |
Parameter 1 | The server name for the mirroring system. |
Probable Cause | You have attempted to connect to the mirror server in a mirroring system. You should change your connection string or DSN to use the server name for the mirroring system. |
Error 1040 | "Cannot use view '%1' because it is invalid" |
---|---|
Constant | VIEW_INVALID |
SAP Sybase Error Number | 2709 |
SQL State | 55W18 |
SQL Code | -1040L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | The name of the view. |
Probable Cause | You attempted to reference an invalid view. The view must be enabled before it can be used again. |
Error 1041 | "Materialized View '%1' not found" |
---|---|
Constant | MATVIEW_NOT_FOUND |
SAP Sybase Error Number | 2710 |
SQL State | 42WB5 |
SQL Code | -1041L |
ODBC 2 State | S0002 |
ODBC 3 State | 42S02 |
Severity Code | |
Parameter 1 | Name of the materialized view that could not be found. |
Probable Cause | You misspelled the name of a materialized view, or you did not qualify a materialized view name with a user name. For example, you might have referred to "mat_view" instead of "owner"."mat_view". |
Error 1042 | "Cannot add a comment to a table declared as LOCAL TEMPORARY" |
---|---|
Constant | COMMENT_NOT_ALLOWED |
SAP Sybase Error Number | 2711 |
SQL State | WW065 |
SQL Code | -1042L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | You attempted to add a comment to a table that has been declared as LOCAL TEMPORARY. This is not allowed. |
Error 1043 | "Request interrupted due to timeout" |
---|---|
Constant | REQUEST_TIMEOUT |
SAP Sybase Error Number | 2712 |
SQL State | 57W01 |
SQL Code | -1043L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | The current request was canceled during its execution since it ran for longer than the request_timeout database option value. The database was able to stop the operation without doing a rollback. If the statement is an INSERT, UPDATE, or DELETE, any changes made by the statement will be canceled. If the statement is a data definition statement (for example CREATE TABLE), the statement will be canceled, but the COMMIT that was done as a side effect will not be canceled. |
Error 1044 | "Invalid password: %1" |
---|---|
Constant | INVALID_NEW_PASSWORD |
SAP Sybase Error Number | 2713 |
SQL State | 28W11 |
SQL Code | -1044L |
ODBC 2 State | 28000 |
ODBC 3 State | 28000 |
Severity Code | |
Probable Cause | The attempt to create a new user ID or change a password failed. The function specified by the verify_password_function option disallowed the password. |
Error 1045 | "Invalid backup parameter value" |
---|---|
Constant | INVALID_BACKUP_PARM_VALUE |
SAP Sybase Error Number | 2714 |
SQL State | WB015 |
SQL Code | -1045L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | One or more of the parameters supplied to the backup operation has an invalid value. |
Error 1046 | "Illegal column definition: %1" |
---|---|
Constant | ILLEGAL_COLUMN_DEFINITION |
SAP Sybase Error Number | 2715 |
SQL State | 55W19 |
SQL Code | -1046L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | A message describing the error that occurred. |
Probable Cause | You are attempting to define a column in a way that is not allowed. |
Error 1047 | "This database does not support encrypted tables" |
---|---|
Constant | ENCRYPTED_TABLES_NOT_SUPPORTED |
SAP Sybase Error Number | 2716 |
SQL State | 55W20 |
SQL Code | -1047L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | You tried to create an encrypted table in a database that does not support them. |
Error 1050 | "Cannot return NULL result as requested data type" |
---|---|
Constant | VALUE_IS_NULL |
SAP Sybase Error Number | 2719 |
SQL State | 22030 |
SQL Code | -1050L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | You tried to retrieve a value from the database that was NULL and assign it to a variable that cannot be NULL. |