Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1009065 | "Operation '%2' not allowed in forced recovery. %1" |
---|---|
Constant | EMSG_DBSPACE_NOT_IN_FORCEDRECOVERY |
SAP Sybase Error Number | 20086 |
SQL State | QSA65 |
SQL Code | -1009065L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Dbspace name |
Probable Cause | Certain operations are not permitted in forced recovery |
Error 1009066 | "Cannot execute '%2' yet since previous alter command is not yet propagated through the multiplex. Try again. %1" |
---|---|
Constant | EMSG_CMD_NOT_REPLAYED |
SAP Sybase Error Number | 20087 |
SQL State | QSA66 |
SQL Code | -1009066L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Dbspace name |
Probable Cause | The command cannot be executed since the previous alter/create command has not propagated through multiplex yet. |
Error 1009067 | "%1" |
---|---|
Constant | EMSG_RFU_QSA67 |
SAP Sybase Error Number | 20088 |
SQL State | QSA67 |
SQL Code | -1009067L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009068 | "Tried to insert a duplicate entry. %1" |
---|---|
Constant | EMSG_HASHTB_DUPENTRY |
SAP Sybase Error Number | 20089 |
SQL State | QSA68 |
SQL Code | -1009068L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009069 | "Could not find key in hashtable" |
---|---|
Constant | EMSG_HASHTB_KEYNOTFOUND |
SAP Sybase Error Number | 20090 |
SQL State | QSA69 |
SQL Code | -1009069L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
Error 1009070 | "Hashtable is full" |
---|---|
Constant | EMSG_HASHTB_FULL |
SAP Sybase Error Number | 20091 |
SQL State | QSA70 |
SQL Code | -1009070L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
Error 1009071 | "Hash input key descriptor has zero fields (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_NOKEY |
SAP Sybase Error Number | 20092 |
SQL State | QSA71 |
SQL Code | -1009071L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009072 | "Insufficient buffers for hash. (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_MAXBUFFERS |
SAP Sybase Error Number | 20093 |
SQL State | QSA72 |
SQL Code | -1009072L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | Specifically, the number of estimated buffers given to the hash object exceeds the size of the buffer cache. |
Error 1009073 | "Hash function can't handle this datatype (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_HASHDT |
SAP Sybase Error Number | 20094 |
SQL State | QSA73 |
SQL Code | -1009073L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009074 | "Key length in hash equality function is zero (%2, %3). %1 " |
---|---|
Constant | EMSG_PHASH_EQUALKEYLEN |
SAP Sybase Error Number | 20095 |
SQL State | QSA74 |
SQL Code | -1009074L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009075 | "Buffer mapper init incorrect (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_BUFMAPINIT |
SAP Sybase Error Number | 20096 |
SQL State | QSA75 |
SQL Code | -1009075L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009076 | "Internal hash error; buffer was previously created: %2 (%3, %4). %1" |
---|---|
Constant | EMSG_PHASH_BUFDOUBLECREATE |
SAP Sybase Error Number | 20097 |
SQL State | QSA76 |
SQL Code | -1009076L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) Buffer Number. |
Parameter 3 | 3) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 4 | 4) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009077 | "Internal hash error; next data entry should be valid (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_INVALID_NEXTENTRY |
SAP Sybase Error Number | 20098 |
SQL State | QSA77 |
SQL Code | -1009077L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009078 | "Internal hash error; buffer not pinned (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_NOT_PINNED |
SAP Sybase Error Number | 20099 |
SQL State | QSA78 |
SQL Code | -1009078L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009079 | "Internal hash error; too many buffers left in use: %2 (%3, %4). %1" |
---|---|
Constant | EMSG_PHASH_INUSE_HIGH |
SAP Sybase Error Number | 20100 |
SQL State | QSA79 |
SQL Code | -1009079L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) Number of buffers. |
Parameter 3 | 3) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 4 | 4) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009080 | "Key doesn't fit on a single database page: %2 (%3, %4). %1" |
---|---|
Constant | EMSG_PHASH_KEY_TOO_LARGE |
SAP Sybase Error Number | 20101 |
SQL State | QSA80 |
SQL Code | -1009080L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) Key size. |
Parameter 3 | 3) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 4 | 4) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009081 | "Data doesn't fit on a single database page: %2 (%3, %4). %1" |
---|---|
Constant | EMSG_PHASH_DATA_TOO_LARGE |
SAP Sybase Error Number | 20102 |
SQL State | QSA81 |
SQL Code | -1009081L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) Data size. |
Parameter 3 | 3) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 4 | 4) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009082 | "Hash object has no data to retrieve, only keys (%2, %3). %1" |
---|---|
Constant | EMSG_PHASH_NO_DATA |
SAP Sybase Error Number | 20103 |
SQL State | QSA82 |
SQL Code | -1009082L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) major context (hos_StatsObj::SubStatementId, usually dfo number) |
Parameter 3 | 3) minor context (s_phash::StatMinorContext, see s_phash.h for enum) |
Probable Cause | No additional information available. |
Error 1009083 | "DBSpace '%2' must be OFFLINE for ALTER PATH. %1" |
---|---|
Constant | EMSG_ALTER_PATH_REQUIRES_OFFLINE_DBSPACE |
SAP Sybase Error Number | 20104 |
SQL State | QSA83 |
SQL Code | -1009083L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace name |
Probable Cause | No additional information available. |
Error 1009084 | "Error opening DBSPACE '%2'. %1" |
---|---|
Constant | EMSG_DBSPACE_OPEN_ERROR |
SAP Sybase Error Number | 20105 |
SQL State | QSA84 |
SQL Code | -1009084L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace name |
Probable Cause | No additional information available. |