Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1001068 | "Datatype, %2 is not supported for this operation. %1" |
---|---|
Constant | EMSG_DATATYPE_NOT_SUPPORTED_ERROR |
SAP Sybase Error Number | 20567 |
SQL State | QFA61 |
SQL Code | -1001068L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | datatype. |
Probable Cause | The reported datatype is not supported by Sybase IQ. |
Error 1001070 | "Unable to load shared library for user-defined function. %1" |
---|---|
Constant | EMSG_UDF_LIBRARY_ERROR |
SAP Sybase Error Number | 20569 |
SQL State | QFA63 |
SQL Code | -1001070L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Shared library for the UDF could not be loaded. |
Error 1001071 | "No valid license found for user-defined function. Feature: %2 %1" |
---|---|
Constant | EMSG_UDF_LICENSE_ERROR |
SAP Sybase Error Number | 20572 |
SQL State | QFA64 |
SQL Code | -1001071L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | licensed feature |
Parameter 2 | location of the exception |
Probable Cause | No valid license found for UDF feature. |
Error 1001072 | "User-defined function %2 internal programming error. %3 . %1" |
---|---|
Constant | EMSG_UDF_PROGRAMMING_ERROR |
SAP Sybase Error Number | 20573 |
SQL State | QFA65 |
SQL Code | -1001072L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | function name |
Parameter 3 | specific UDF programming error |
Probable Cause | User-defined function has an internal programming error. |
Error 1001073 | "The result datatype for function '%2' exceeds the maximum supported numeric precision of 255. Please set the proper value for precision in numeric function, %1" |
---|---|
Constant | EMSG_PRECISIONOVERFLOW |
SAP Sybase Error Number | 20574 |
SQL State | QFA66 |
SQL Code | -1001073L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Field Name |
Probable Cause | Precision requested for numeric function is larger than what is allowed. Please set the proper value for precision if not set. |
Error 1001074 | "The number of select list columns do not match the required for the input table parameter %2, %1" |
---|---|
Constant | EMSG_TPF_INBL_INSEL_COLNUM_MISMATCH |
SAP Sybase Error Number | 20575 |
SQL State | QFA67 |
SQL Code | -1001074L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | input table parameter name |
Probable Cause | MARKNEW Please check your input query or definition of the UDF. |
Error 1001100 | "Load/insert/update/delete/RLV are not supported for 15.x char/varchar/varbinary columns of width greater than 255 and LOB datatypes. Please execute sp_iqrebuildindex first to convert the index to IQ version 16. %1" |
---|---|
Constant | EMSG_15_LVC_LOB_UPDATE_NOT_SUPPORTED |
SAP Sybase Error Number | 22150 |
SQL State | QSB92 |
SQL Code | -1001100L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | When IQ 16.x engine attempts to load/insert/update data into a 15.x char/varchar/varbinary greater than 255 or LOB FP index, this exception is thrown to indicate that the operation is not allowed. It is required to run sp_iqrebuildindex first so as to convert the index to IQ version 16. |
Error 1001102 | "RLV store merge already in progress for table %2. %1" |
---|---|
Constant | EMSG_RV_MERGE_IN_PROGRESS |
SAP Sybase Error Number | 22038 |
SQL State | QRA02 |
SQL Code | -1001102L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | The illegal merge string |
Probable Cause | There is already an RLV store merge in progress for this table. Only one RLV merge is allowed at a time for an RLV table. |
Error 1001103 | "Table %2 is not RLV enabled. %1" |
---|---|
Constant | EMSG_RV_MERGE_NOT_RLV_ENABLED |
SAP Sybase Error Number | 22039 |
SQL State | QRA03 |
SQL Code | -1001103L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | The table name |
Probable Cause | An RLV store merge was attempted on a table which was not RLV enabled. Only tables which are RLV enabled may be merged. |
Error 1001104 | "Unable to perform merge, table %2 has too many fragments. %1" |
---|---|
Constant | EMSG_RV_MERGE_TOO_MANY_FRAGMENTS |
SAP Sybase Error Number | 22040 |
SQL State | QRA04 |
SQL Code | -1001104L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | table name |
Probable Cause | Long running transactions are keeping too many old fragments of the table in memory. Table cannot be merged until the long running transactions terminate. |
Error 1001105 | "Table %2 requires an RLV store merge before table-level modification. %1" |
---|---|
Constant | EMSG_RV_MERGE_NEEDED |
SAP Sybase Error Number | 22041 |
SQL State | QRA05 |
SQL Code | -1001105L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | The table name |
Probable Cause | An table-level RW operation was attempted on an RLV table requiring merge of the RLV store. This merge cannot be done automatically because the current transaction has already established a snapshot version for this table. Either run a manual merge first using sp_iqmergerlvstore or modify the transaction such that blocking is enabled and the the first statement in the transaction is a table-level RW command. |
Error 1001106 | "Transaction attempted to delete or update a row in '%2' already deleted or updated by another transaction. %1" |
---|---|
Constant | EMSG_RV_FUTUREVERSION |
SAP Sybase Error Number | 22042 |
SQL State | QRA06 |
SQL Code | -1001106L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | The table name |
Probable Cause | A transaction attempted to delete or update a row that has already been deleted or updated by another transaction. Row Level Versioning does not allow access to future versions of the row. |
Error 1001107 | "PARALLEL IQ is not supported for RLV enabled tables." |
---|---|
Constant | EMSG_RV_NO_PARALLEL_IQ |
SAP Sybase Error Number | 22043 |
SQL State | QRA07 |
SQL Code | -1001107L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | BEGIN .. END PARALLEL IQ is not supported if any of the tables on which (parallel) index is to be created is RLV enabled. |
Error 1001108 | "The option 'Revert_To_V15_Optimizer' is not supported for queries involving RLV enabled tables" |
---|---|
Constant | EMSG_RV_V15_CONFLICT |
SAP Sybase Error Number | 22044 |
SQL State | QRA08 |
SQL Code | -1001108L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | Pre-Elan optimization is used with revert_to_v15_optimizer option, query tree creation itself does not allow it if table is RLV enabled. |
Error 1002000 | "Unknown error: %1" |
---|---|
Constant | EMSG_DATA_UNKNOWN |
SAP Sybase Error Number | 20502 |
SQL State | QGA00 |
SQL Code | -1002000L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1002001 | "Data has already been inserted into index %2 for row %3. %1" |
---|---|
Constant | EMSG_DATA_ALREADYINSERTED |
SAP Sybase Error Number | 20503 |
SQL State | QGA01 |
SQL Code | -1002001L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Probable Cause | No additional information available. |
Error 1002002 | " for IQ_ROWID row " |
---|---|
Constant | EMSG_NOT_USED |
SAP Sybase Error Number | 20504 |
SQL State | QGA02 |
SQL Code | -1002002L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
Error 1002003 | "Tried to insert a duplicate value into a unique index %2 on row %3. %1" |
---|---|
Constant | EMSG_DATA_DUPLICATEVALUE |
SAP Sybase Error Number | 20505 |
SQL State | QGA03 |
SQL Code | -1002003L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Probable Cause | No additional information available. |
Error 1002004 | No message |
---|---|
Constant | EMSG_DATA_DUPLICATEVALUE2_EMPTY_SLOT |
SAP Sybase Error Number | 20506 |
SQL State | QGA04 |
SQL Code | -1002004L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
Error 1002005 | "Tried to insert a null value into a non-null field %2 on row %3. %1" |
---|---|
Constant | EMSG_DATA_NONULLSALLOWED |
SAP Sybase Error Number | 20507 |
SQL State | QGA05 |
SQL Code | -1002005L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Probable Cause | No additional information available. |