Messages 1010058 through 1012002

Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.

Error 1010058	"Unable to perform forced recovery when database is in read only mode. %1"
Constant	EMSG_FREC_IN_READ_ONLY
SAP Sybase Error Number	21202
SQL State	QXA57
SQL Code	-1010058L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Probable Cause	Recovery switch '-iqfrec' is allowed on read/write databases only

Error 1010059	"Unable to open the multiplex database. The database can only be opened by starting the Coordinator server using single node mode switch '-iqmpx_sn 1'. %1"
Constant	EMSG_MPX_OPEN_OLDDB_NEED_SINGLE
SAP Sybase Error Number	22023
SQL State	QXA58
SQL Code	-1010059L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Probable Cause	An older version of multiplex database can only be opened bystarting the server in single node mode. If you get this error after upgrading the database when the server was started using '-iqro 1', then the database still needs to be opened by starting the coordinator server in single node mode but without '-iqro 1'. This is because the internal IQ on-disk structures could not be upgraded earlier. To complete the upgrade, open the database by starting the coordinator server using single node mode switch '-iqmpx_sn 1', but without '-iqro 1'. After a clean shutdown, the database can then be started normally.

Error 1010060	"Server option -iqmpx_nowr only allowed when there are no writers in multiplex %1"
Constant	EMSG_MPX_NOWR_INVALID_USE
SAP Sybase Error Number	21212
SQL State	QXA60
SQL Code	-1010060L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	23
Parameter 1	location of the exception
Probable Cause	Please restart coordinator without -iqmpx_nowr switch to add a writer

Error 1010061	"Server switch -iqmpx_nowr only allowed on coordinator node %1"
Constant	EMSG_MPX_NOWR_INVALID_USE_NOTCNODE
SAP Sybase Error Number	21213
SQL State	QXA61
SQL Code	-1010061L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	23
Parameter 1	location of the exception
Probable Cause	Please restart the server without -iqmpx_nowr switch

Error 1010062	"Unable to open the database. Start the coordinator server first, without server option -iqro, to complete the Database Upgrade. %1"
Constant	EMSG_MPX_START_COORD_FIRST
SAP Sybase Error Number	22029
SQL State	QXA62
SQL Code	-1010062L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	23
Parameter 1	location of the exception
Probable Cause	As IQ store was opened in RO mode when you upgraded the database, some of its internal meta-data information could not be upgraded to new format. Please start the coordinator server first, without server option -iqro, to complete the IQ side upgrade and continue.

Error 1011000	"Vertical Projection Cursor state error %1"
Constant	EMSG_CURSORSTATEERROR
SAP Sybase Error Number	20000
SQL State	QVA00
SQL Code	-1011000L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	23
Parameter 1	location of the exception
Probable Cause	No additional information available.

Error 1011001	"Cannot find index for a given dfe %1"
Constant	EMSG_INDEXNOTFOUND
SAP Sybase Error Number	20001
SQL State	QVA01
SQL Code	-1011001L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	18
Parameter 1	location of the exception
Probable Cause	No additional information available.

Error 1011002	"The number of existing indexes exceeds the current maximum number of indexes. %1"
Constant	EMSG_EXCEEDEDMAXINDEXES
SAP Sybase Error Number	20002
SQL State	QVA02
SQL Code	-1011002L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	23
Parameter 1	location of the exception
Probable Cause	No additional information available.

Error 1011003	"Vertical Projection Cursor does not support AD-HOC joins. %1"
Constant	EMSG_ADHOCJOINREQUIRED
SAP Sybase Error Number	20003
SQL State	QVA03
SQL Code	-1011003L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Probable Cause	No additional information available.

Error 1011004	"Cannot drop primary key or unique constraint because a foreign key still references it."
Constant	EMSG_FKEY_STILL_EXISTS_TO_CKEY
SAP Sybase Error Number	20004
SQL State	QNA27
SQL Code	-1011004L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	A primary key or unique constraint involved in a referential integrity relationship cannot be dropped until its corresponding foreign key is first dropped.

Error 1011006	"the pattern argument in a like predicate must have string datatype."
Constant	EMSG_INVALIDDATATYPE
SAP Sybase Error Number	20006
SQL State	QVA06
SQL Code	-1011006L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011007	"the escape argument in a like predicate must be a one byte character."
Constant	EMSG_INVALIDESCAPE
SAP Sybase Error Number	20007
SQL State	QVA07
SQL Code	-1011007L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011009	"Group (L)"
Constant	EMSG_VPGP_GB_COL_LFS
SAP Sybase Error Number	20009
SQL State	QVA09
SQL Code	-1011009L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011010	"Group (S)"
Constant	EMSG_VPGP_GB_COL_SFS
SAP Sybase Error Number	20010
SQL State	QVA10
SQL Code	-1011010L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011011	"Aggregate (L)"
Constant	EMSG_VPGP_AGG_LFS
SAP Sybase Error Number	20011
SQL State	QVA11
SQL Code	-1011011L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011012	"Aggregate (S)"
Constant	EMSG_VPGP_AGG_SFS
SAP Sybase Error Number	20012
SQL State	QVA12
SQL Code	-1011012L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1011013	"Projection"
Constant	EMSG_VPGP_PROJ
SAP Sybase Error Number	20013
SQL State	QVA13
SQL Code	-1011013L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Probable Cause	No additional information available.

Error 1012000	"You cannot do a partial restore for database '%2' because it has been updated (%3) since its last backup (%4). %1"
Constant	EMSG_RESTORE_MORE_RECENT_UPDATETIME
SAP Sybase Error Number	20923
SQL State	QUA00
SQL Code	-1012000L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Parameter 2	database
Parameter 3	last update
Parameter 4	last backup
Probable Cause	No additional information available.

Error 1012001	"There is already a backup or selective restore in progress. %1"
Constant	EMSG_BACKUP_MULTIPLE_IN_PROGRESS
SAP Sybase Error Number	20924
SQL State	QUA01
SQL Code	-1012001L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Probable Cause	No additional information available.

Error 1012002	"Unable to write to archive. ('%2') %1"
Constant	EMSG_BACKUP_DEVICE_WRITEERROR
SAP Sybase Error Number	20925
SQL State	QUA02
SQL Code	-1012002L
ODBC 2 State	ERROR
ODBC 3 State	ERROR
Severity Code	14
Parameter 1	location of the exception
Parameter 2	explanation for %2
Probable Cause	No additional information available.

Parent topic: 1009163 - 1013038

Created May 23, 2013. Send feedback on this help topic to Technical Publications: pubs@sybase.com