Before you can use M-Business Client with an Ethernet card (or other network connection), make sure that the Ethernet card is configured properly to allow you network access. Refer to your manufacturer’s documentation for information on configuring your Ethernet card and network access.

To access M-Business Server, M-Business Client uses the settings in M-Business Connect. If you can connect to your ISP but you are unable to access M-Business Server, check the M-Business Connect settings. See Setting server information.

The exact steps for synchronizing to M-Business Server using an Ethernet card may vary depending on the type of Ethernet card you use.

To synchronize with M-Business Server

1. Install M-Business Client software on your desktop computer, then synchronize to install the software on your mobile device.

2. Follow the installation manual for configuring the Ethernet card on your device.

   Note

   Most cards automatically will assign you an IP address.

3. Open M-Business Client, then choose Tools » Server Options » Sync All or Tools » Sync.

4. Once the card is properly installed, clicking on any link leading to a page not on the device will cause M-Business Client automatically to retrieve and deliver that page to you.