Error Messages: 300000-399999

Error Messages Relating to Internal Adapters

Code	300001
Severity	Debug
Message	~FixIn_Adapter()
Description	~FixIn_Adapter()

Code	300002
Severity	Debug
Message	FixIn_Adapter::reset()
Description	FixIn_Adapter::reset()

Code	300003
Severity	Debug
Message	FixIn_Adapter::openFileSource()
Description	FixIn_Adapter::openFileSource()

Code	300004
Severity	Debug
Message	FixIn_Adapter::getNext()
Description	FixIn_Adapter::getNext()

Code	300005
Severity	Debug
Message	FixIn_Adapter::getFixMessage()
Description	FixIn_Adapter::getFixMessage()

Code	300006
Severity	Debug
Message	FixIn_Adapter::getFixMessageFromFile()
Description	FixIn_Adapter::getFixMessageFromFile()

Code	300007
Severity	Info
Message	Reached end of file :{0}
Description	Reached end of file :{0}

Code	300008
Severity	Error
Message	Cannot read from datasource.
Description	Cannot read from datasource.

Code	300009
Severity	Debug
Message	FixIn_Adapter::getFixMessageFromSocket()
Description	FixIn_Adapter::getFixMessageFromSocket()

Code	300010
Severity	Error
Message	Error reading from socket.
Description	Error reading from socket.

Code	300011
Severity	Debug
Message	FixIn_Adapter::stop()
Description	FixIn_Adapter::stop()

Code	300012
Severity	Debug
Message	FixIn_Adapter::getParams()
Description	FixIn_Adapter::getParams()

Code	300013
Severity	Error
Message	Unknown source type {0}
Description	Unknown source type {0}

Code	300014
Severity	Debug
Message	FixIn_Adapter::canDiscover()
Description	FixIn_Adapter::canDiscover()

Code	300015
Severity	Debug
Message	FixIn_Adapter::discover()
Description	FixIn_Adapter::discover()

Code	300016
Severity	Error
Message	Tag {0} not found in FIX dictionary
Description	Tag {0} not found in FIX dictionary

Code	300017
Severity	Debug
Message	FixIn_Adapter::putNext()
Description	FixIn_Adapter::putNext()

Code	300018
Severity	Error
Message	Cannot open file : {0}
Description	Cannot open file : {0}

Code	300019
Severity	Info
Message	Reached end of file {0}
Description	Reached end of file {0}

Code	300020
Severity	Debug
Message	~FixOut_Adapter()
Description	~FixOut_Adapter()

Code	300021
Severity	Debug
Message	FixOut_Adapter::reset()
Description	FixOut_Adapter::reset()

Code	300022
Severity	Debug
Message	FixOut_Adapter::openFileSource()
Description	FixOut_Adapter::openFileSource()

Code	300023
Severity	Debug
Message	FixOut_Adapter::putNext()
Description	FixOut_Adapter::putNext()

Code	300024
Severity	Debug
Message	FixOut_Adapter::WriteToDataSource()
Description	FixOut_Adapter::WriteToDataSource()

Code	300025
Severity	Debug
Message	FixOut_Adapter::writeToFile()
Description	FixOut_Adapter::writeToFile()

Code	300026
Severity	Error
Message	Cannot write to file.
Description	Cannot write to file.

Code	300027
Severity	Debug
Message	FixOut_Adapter::writeToSocket()
Description	FixOut_Adapter::writeToSocket()

Code	300028
Severity	Error
Message	Error writing to socket.
Description	Error writing to socket.

Code	300029
Severity	Debug
Message	FixOut_Adapter::stop()
Description	FixOut_Adapter::stop()

Code	300030
Severity	Debug
Message	FixOut_Adapter::getParams()
Description	FixOut_Adapter::getParams()

Code	300031
Severity	Debug
Message	FixOut_Adapter::canDiscover()
Description	FixOut_Adapter::canDiscover()

Code	300032
Severity	Debug
Message	FixOut_Adapter::getNext()
Description	FixOut_Adapter::getNext()

Code	300033
Severity	Debug
Message	FixOut_Adapter::commitTransaction()
Description	FixOut_Adapter::commitTransaction()

Code	300034
Severity	Warning
Message	Warning: {0} opcode not supported by FIX outbound connector
Description	Warning: {0} opcode not supported by FIX outbound connector

Code	300035
Severity	Debug
Message	AtomReaderBinInputStream::readBytes enter
Description	AtomReaderBinInputStream::readBytes enter

Code	300036
Severity	Error
Message	AtomReader - HTTP Header not encounterd at beginning of data.
Description	AtomReader - HTTP Header not encounterd at beginning of data.

Code	300037
Severity	Error
Message	AtomReader - HTTP Header invalid
Description	AtomReader - HTTP Header invalid

Code	300038
Severity	Error
Message	AtomReader_Adapter::getAtomData(): Read failure: {0}
Description	AtomReader_Adapter::getAtomData(): Read failure: {0}

Code	300039
Severity	Debug
Message	AtomReader_Adapter::reset()
Description	AtomReader_Adapter::reset()

Code	300040
Severity	Error
Message	AtomReader_Adapter::processParams() failed - See previous messages.
Description	AtomReader_Adapter::processParams() failed - See previous messages.

Code	300041
Severity	Error
Message	AtomReader_Adapter::reset() failed - See previous messages.
Description	AtomReader_Adapter::reset() failed - See previous messages.

Code	300042
Severity	Error
Message	AtomReader_Adapter::setupSAXParser() failed - See previous messages.
Description	AtomReader_Adapter::setupSAXParser() failed - See previous messages.

Code	300043
Severity	Error
Message	AtomReader_Adapter::setupIP() failed - See previous messages.
Description	AtomReader_Adapter::setupIP() failed - See previous messages.

Code	300044
Severity	Debug
Message	AtomReader_Adapter::reset() ended
Description	AtomReader_Adapter::reset() ended

Code	300045
Severity	Debug
Message	AtomReader_Adapter::getNext()
Description	AtomReader_Adapter::getNext()

Code	300046
Severity	Error
Message	AtomReader_Adapter::getAtomData() failed
Description	AtomReader_Adapter::getAtomData() failed

Code	300047
Severity	Debug
Message	AtomReader_Adapter::getNext() ended
Description	AtomReader_Adapter::getNext() ended

Code	300048
Severity	Debug
Message	AtomReader_Adapter::cleanup()
Description	AtomReader_Adapter::cleanup()

Code	300049
Severity	Debug
Message	AtomReader_Adapter::cleanup ended
Description	AtomReader_Adapter::cleanup ended

Code	300050
Severity	Debug
Message	AtomReader_Adapter::start()
Description	AtomReader_Adapter::start()

Code	300051
Severity	Debug
Message
Description	No additional information available.

Code	300052
Severity	Debug
Message	AtomReader_Adapter::stop()
Description	AtomReader_Adapter::stop()

Code	300053
Severity	Debug
Message	AtomReader_Adapter::stop() ended
Description	AtomReader_Adapter::stop() ended

Code	300054
Severity	Debug
Message	AtomReader_Adapter::startDocument()
Description	AtomReader_Adapter::startDocument()

Code	300055
Severity	Debug
Message	AtomReader_Adapter::endDocument()
Description	AtomReader_Adapter::endDocument()

Code	300056
Severity	Debug
Message	AtomReader_Adapter::endDocument() ended
Description	AtomReader_Adapter::endDocument() ended

Code	300057
Severity	Debug
Message	AtomReader_Adapter::startCDATA()::-
Description	AtomReader_Adapter::startCDATA()::-

Code	300058
Severity	Debug
Message	AtomReader_Adapter::endCDATA()::-
Description	AtomReader_Adapter::endCDATA()::-

Code	300059
Severity	Error
Message	Message Context: {0}
Description	Message Context: {0}

Code	300060
Severity	Debug
Message	AtomReader_Adapter::resetDocument.
Description	AtomReader_Adapter::resetDocument.

Code	300061
Severity	Error
Message	Atom SAX Parse Serious Error at Line{0} char{1} with message{2}
Description	Atom SAX Parse Serious Error at Line{0} char{1} with message{2}

Code	300062
Severity	Error
Message	Atom SAX Parse Fatal Error at Line{0} char{1} with message{2}
Description	Atom SAX Parse Fatal Error at Line{0} char{1} with message{2}

Code	300063
Severity	Error
Message	Atom SAX Parse warning at Line{0} char{1} with message{2}
Description	Atom SAX Parse warning at Line{0} char{1} with message{2}

Code	300064
Severity	Debug
Message	AtomReader_Adapter::processParams()
Description	AtomReader_Adapter::processParams()

Code	300065
Severity	Error
Message	AtomReader - _dateFormat not supplied. Defaulted to Y-%m-%dT%H:%M:%S
Description	AtomReader - _dateFormat not supplied. Defaulted to Y-%m-%dT%H:%M:%S

Code	300066
Severity	Error
Message	AtomReader - _timestampFormat not supplied. Defaulted to %Y-%m-%dT%H:%M:%S
Description	AtomReader - _timestampFormat not supplied. Defaulted to %Y-%m-%dT%H:%M:%S

Code	300067
Severity	Error
Message	AtomReader - refreshInterval value suspicious, set to 1 minute
Description	AtomReader - refreshInterval value suspicious, set to 1 minute

Code	300068
Severity	Error
Message	AtomReader_Adapter::processParams() failed - URL Value not supplied .
Description	AtomReader_Adapter::processParams() failed - URL Value not supplied .

Code	300069
Severity	Notice
Message	AtomReader - URL Port not supplied. Default set to 80.
Description	AtomReader - URL Port not supplied. Default set to 80.

Code	300070
Severity	Error
Message	AtomReader - Host name length can not be 0
Description	AtomReader - Host name length can not be 0

Code	300071
Severity	Error
Message	AtomReader - URL path length is 0, but allowed.
Description	AtomReader - URL path length is 0, but allowed.

Code	300072
Severity	Debug
Message	AtomReader_Adapter::processParams() ended
Description	AtomReader_Adapter::processParams() ended

Code	300073
Severity	Debug
Message	AtomReader_Adapter::resetRowbuffer()
Description	AtomReader_Adapter::resetRowbuffer()

Code	300074
Severity	Debug
Message	AtomReader_Adapter::resetRowbuffer() ended
Description	AtomReader_Adapter::resetRowbuffer() ended

Code	300075
Severity	Debug
Message	AtomReader_Adapter::setupSAXParser()
Description	AtomReader_Adapter::setupSAXParser()

Code	300076
Severity	Error
Message	Error during initialization! Message: {0}
Description	Error during initialization! Message: {0}

Code	300077
Severity	Debug
Message	AtomReader_Adapter::setupSAXParser() ended
Description	AtomReader_Adapter::setupSAXParser() ended

Code	300078
Severity	Debug
Message	AtomReader_Adapter::resetSAXParser()
Description	AtomReader_Adapter::resetSAXParser()

Code	300079
Severity	Debug
Message	AtomReader_Adapter::resetSAXParser() ended
Description	AtomReader_Adapter::resetSAXParser() ended

Code	300080
Severity	Debug
Message	AtomReader_Adapter::pollSleep()
Description	AtomReader_Adapter::pollSleep()

Code	300081
Severity	Debug
Message	AtomReader_Adapter::pollSleep() ended
Description	AtomReader_Adapter::pollSleep() ended

Code	300082
Severity	Debug
Message	AtomReader_Adapter::setupIP()
Description	AtomReader_Adapter::setupIP()

Code	300083
Severity	Error
Message	AtomReader_Adapter::setupIP() open failure:
Description	AtomReader_Adapter::setupIP() open failure:

Code	300084
Severity	Debug
Message	AtomReader_Adapter::setupIP() ended
Description	AtomReader_Adapter::setupIP() ended

Code	300085
Severity	Debug
Message	AtomReader_Adapter::sendIPRequest()
Description	AtomReader_Adapter::sendIPRequest()

Code	300086
Severity	Error
Message	AtomReader_Adapter::sendIPRequest(): Failure: {0}
Description	AtomReader_Adapter::sendIPRequest(): Failure: {0}

Code	300087
Severity	Debug
Message	AtomReader_Adapter::sendIPRequest() ended
Description	AtomReader_Adapter::sendIPRequest() ended

Code	300088
Severity	Debug
Message	AtomReader_Adapter::disconnectIP()
Description	AtomReader_Adapter::disconnectIP()

Code	300089
Severity	Debug
Message	AtomReader_Adapter::disconnectIP() ended
Description	AtomReader_Adapter::disconnectIP() ended

Code	300090
Severity	Debug
Message	AtomReader_Adapter::getAtomData() ended with error
Description	AtomReader_Adapter::getAtomData() ended with error

Code	300091
Severity	Debug
Message	AtomReader_Adapter::getAtomData() ended at eof
Description	AtomReader_Adapter::getAtomData() ended at eof

Code	300092
Severity	Debug
Message	AtomReader_Adapter::getAtomData parseFirst error. No rows returned. Will retry next interval
Description	AtomReader_Adapter::getAtomData parseFirst error. No rows returned. Will retry next interval

Code	300093
Severity	Debug
Message	AtomReader_Adapter::getAtomData() ended
Description	AtomReader_Adapter::getAtomData() ended

Code	300094
Severity	Debug
Message	DBInput_Adapter::reset() Entered
Description	DBInput_Adapter::reset() Entered

Code	300095
Severity	Error
Message	DBInput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed
Description	DBInput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed

Code	300096
Severity	Error
Message	Error(s) encountered in startup parameters. Adapter initialization failed
Description	Error(s) encountered in startup parameters. Adapter initialization failed

Code	300097
Severity	Error
Message	DBInput_Adapter::reset() Connection initialization failed
Description	DBInput_Adapter::reset() Connection initialization failed

Code	300098
Severity	Error
Message	buildPermutation not successful
Description	buildPermutation not successful

Code	300099
Severity	Error
Message	DBInput_Adapter::reset() buildPermutation not successful. Adapter initialization failed
Description	DBInput_Adapter::reset() buildPermutation not successful. Adapter initialization failed

Code	300100
Severity	Debug
Message	DBInput_Adapter::cleanup()
Description	DBInput_Adapter::cleanup()

Code	300101
Severity	Error
Message	DBInput_Adapter::cleanup commit() failed
Description	DBInput_Adapter::cleanup commit() failed

Code	300102
Severity	Debug
Message	DBInput_Adapter::cleanup ended
Description	DBInput_Adapter::cleanup ended

Code	300103
Severity	Debug
Message	DBInput_Adapter::stop()
Description	DBInput_Adapter::stop()

Code	300104
Severity	Debug
Message	DBInput_Adapter::stop() ended
Description	DBInput_Adapter::stop() ended

Code	300105
Severity	Debug
Message	DBInput_Adapter stopped in getNext()
Description	DBInput_Adapter stopped in getNext()

Code	300106
Severity	Error
Message	DBInput_Adapter::getNext() nextResultSet not successful.
Description	DBInput_Adapter::getNext() nextResultSet not successful.

Code	300107
Severity	Error
Message	DBInput_Adapter::getNext() getResultSet() not successful.
Description	DBInput_Adapter::getNext() getResultSet() not successful.

Code	300108
Severity	Error
Message	DBInput_Adapter::getNext() new result set next() not successful.
Description	DBInput_Adapter::getNext() new result set next() not successful.

Code	300109
Severity	Debug
Message	DBInput_Adapter stopped in getNext()after poll
Description	DBInput_Adapter stopped in getNext()after poll

Code	300110
Severity	Error
Message	DBInput_Adapter::getNext().doStatementQuery() failed. Attempting to restablish the connection.
Description	DBInput_Adapter::getNext().doStatementQuery() failed. Attempting to restablish the connection.

Code	300111
Severity	Error
Message	DBInput_Adapter::getNext() resetConnection not successful.
Description	DBInput_Adapter::getNext() resetConnection not successful.

Code	300112
Severity	Error
Message	DBInput_Adapter::getNext() getData failed
Description	DBInput_Adapter::getNext() getData failed

Code	300113
Severity	Debug
Message	DBInput_Adapter::discoverTables() Entered
Description	DBInput_Adapter::discoverTables() Entered

Code	300114
Severity	Error
Message	DBInput_Adapter::discoverTables could not get table names
Description	DBInput_Adapter::discoverTables could not get table names

Code	300115
Severity	Debug
Message	DBInput_Adapter::discoverTables() ended normally
Description	DBInput_Adapter::discoverTables() ended normally

Code	300116
Severity	Debug
Message	DBInput_Adapter::discover() Entered
Description	DBInput_Adapter::discover() Entered

Code	300117
Severity	Error
Message	DBInput_Adapter::discover() getTableNumColumns failed
Description	DBInput_Adapter::discover() getTableNumColumns failed

Code	300118
Severity	Error
Message	DBInput_Adapter::discover() ended abnormally
Description	DBInput_Adapter::discover() ended abnormally

Code	300119
Severity	Error
Message	DBInput_Adapter::discover() executeQuery select all query failed -
Description	DBInput_Adapter::discover() executeQuery select all query failed -

Code	300120
Severity	Warning
Message	DBInput_Adapter::discover() table sampled appears to have no data.
Description	DBInput_Adapter::discover() table sampled appears to have no data.

Code	300121
Severity	Error
Message	DBInput_Adapter::discover() sample getData failed
Description	DBInput_Adapter::discover() sample getData failed

Code	300122
Severity	Debug
Message	DBInput_Adapter::resetConnection() Entered
Description	DBInput_Adapter::resetConnection() Entered

Code	300123
Severity	Error
Message	DBInput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed
Description	DBInput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed

Code	300124
Severity	Error
Message	DBInput_Adapter::resetConnection - Error getting connection from service
Description	DBInput_Adapter::resetConnection - Error getting connection from service

Code	300125
Severity	Error
Message	- DBInput_Adapter::resetConnection Adapter initialization failed
Description	- DBInput_Adapter::resetConnection Adapter initialization failed

Code	300126
Severity	Error
Message	DBInput_Adapter::resetConnection() ended abnormally
Description	DBInput_Adapter::resetConnection() ended abnormally

Code	300127
Severity	Error
Message	DBInput_Adapter::resetConnection - executeQuery not successful
Description	DBInput_Adapter::resetConnection - executeQuery not successful

Code	300128
Severity	Error
Message	DBInput_Adapter::resetConnection - Result set for ExecuteQuery not created
Description	DBInput_Adapter::resetConnection - Result set for ExecuteQuery not created

Code	300129
Severity	Error
Message	DBInput_Adapter::resetConnection - This could indicate an invalid query
Description	DBInput_Adapter::resetConnection - This could indicate an invalid query

Code	300130
Severity	Warning
Message	DBInput_Adapter::resetConnection - Stream and result set column count are not equal
Description	DBInput_Adapter::resetConnection - Stream and result set column count are not equal

Code	300131
Severity	Debug
Message	DBInput_Adapter::processParams() Entered
Description	DBInput_Adapter::processParams() Entered

Code	300132
Severity	Error
Message	DBInput_Adapter REQUIRED input 'service' property is empty.
Description	DBInput_Adapter REQUIRED input 'service' property is empty.

Code	300133
Severity	Error
Message	DBInput_Adapter 'query' OR 'table' is required, but both properties are empty.
Description	DBInput_Adapter 'query' OR 'table' is required, but both properties are empty.

Code	300134
Severity	Warning
Message	DBInput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS
Description	DBInput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS

Code	300135
Severity	Warning
Message	DBInput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS
Description	DBInput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS

Code	300136
Severity	Notice
Message	DBInput_Adapter pollperiod is 0. No polling will occur.
Description	DBInput_Adapter pollperiod is 0. No polling will occur.

Code	300137
Severity	Warning
Message	DBInput_Adapter pollperiod not supplied or negative. Defaulted to 2 seconds.
Description	DBInput_Adapter pollperiod not supplied or negative. Defaulted to 2 seconds.

Code	300138
Severity	Debug
Message	DBInput_Adapter::processParams() Ended
Description	DBInput_Adapter::processParams() Ended

Code	300139
Severity	Debug
Message	DBInput_Adapter::buildPermutation() Entered
Description	DBInput_Adapter::buildPermutation() Entered

Code	300140
Severity	Error
Message	DBInput_Adapter::buildPermutation() Set permutation string failed.
Description	DBInput_Adapter::buildPermutation() Set permutation string failed.

Code	300141
Severity	Error
Message	DBInput_Adapter::buildPermutation() Exited abnormally
Description	DBInput_Adapter::buildPermutation() Exited abnormally

Code	300142
Severity	Error
Message	DBInput_Adapter::buildPermutation() getNumColumns failed
Description	DBInput_Adapter::buildPermutation() getNumColumns failed

Code	300143
Severity	Error
Message	DBInput_Adapter::buildPermutation() getColumnInfo failed
Description	DBInput_Adapter::buildPermutation() getColumnInfo failed

Code	300144
Severity	Error
Message	DBInput_Adapter::buildPermutation() setExternalOrder failed
Description	DBInput_Adapter::buildPermutation() setExternalOrder failed

Code	300145
Severity	Error
Message	DBInput_Adapter::buildPermutation() setPlatOrder failed
Description	DBInput_Adapter::buildPermutation() setPlatOrder failed

Code	300146
Severity	Error
Message	DBInput_Adapter::buildPermutation() prepareOrder failed.
Description	DBInput_Adapter::buildPermutation() prepareOrder failed.

Code	300147
Severity	Debug
Message	DBInput_Adapter::buildPermutation() permutation not required
Description	DBInput_Adapter::buildPermutation() permutation not required

Code	300148
Severity	Debug
Message	DBInput_Adapter::buildPermutation() Exited normally
Description	DBInput_Adapter::buildPermutation() Exited normally

Code	300149
Severity	Debug
Message	DBInput_Adapter::discover() ended normally.
Description	DBInput_Adapter::discover() ended normally.

Code	300150
Severity	Debug
Message	DBInput_Adapter::resetConnection() ended normally
Description	DBInput_Adapter::resetConnection() ended normally

Code	300151
Severity	Debug
Message	DBOutput_Adapter::reset() Entered
Description	DBOutput_Adapter::reset() Entered

Code	300152
Severity	Error
Message	DBOutput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed
Description	DBOutput_Adapter::reset()createConnectionRow() Error. Adapter initialization failed

Code	300153
Severity	Error
Message	Error(s) encountered in startup parameters. Adapter initialization failed
Description	Error(s) encountered in startup parameters. Adapter initialization failed

Code	300154
Severity	Error
Message	DBOutput_Adapter::resetConnection - executeQuery not successful - resetConnection() ended abnormally
Description	DBOutput_Adapter::resetConnection - executeQuery not successful - resetConnection() ended abnormally

Code	300155
Severity	Error
Message	buildPermutation not successful
Description	buildPermutation not successful

Code	300156
Severity	Error
Message	DBOutput_Adapter::reset() buildPermutation not successful. Adapter initialization failed
Description	DBOutput_Adapter::reset() buildPermutation not successful. Adapter initialization failed

Code	300157
Severity	Error
Message	DBOutput_Adapter::reset() truncateTable failed
Description	DBOutput_Adapter::reset() truncateTable failed

Code	300158
Severity	Debug
Message	DBOutput_Adapter::reset() Exited
Description	DBOutput_Adapter::reset() Exited

Code	300159
Severity	Debug
Message	DBOutput_Adapter::cleanup()
Description	DBOutput_Adapter::cleanup()

Code	300160
Severity	Error
Message	DBOutput_Adapter::cleanup commit() failed
Description	DBOutput_Adapter::cleanup commit() failed

Code	300161
Severity	Debug
Message	DBOutput_Adapter::cleanup ended
Description	DBOutput_Adapter::cleanup ended

Code	300162
Severity	Debug
Message	DBOutput_Adapter::stop()
Description	DBOutput_Adapter::stop()

Code	300163
Severity	Debug
Message	DBOutput_Adapter::stop() ended
Description	DBOutput_Adapter::stop() ended

Code	300164
Severity	Debug
Message	DBOutput_Adapter::testBatch()
Description	DBOutput_Adapter::testBatch()

Code	300165
Severity	Error
Message	DBOutput_Adapter::testBatch() resetBatch failed
Description	DBOutput_Adapter::testBatch() resetBatch failed

Code	300166
Severity	Error
Message	DBOutput_Adapter::testBatch() addToBatch failed
Description	DBOutput_Adapter::testBatch() addToBatch failed

Code	300167
Severity	Error
Message	DBOutput_Adapter::testBatch() executeBatch failed
Description	DBOutput_Adapter::testBatch() executeBatch failed

Code	300168
Severity	Error
Message	DBOutput_Adapter::clearBatch() failed. Exiting abnormally
Description	DBOutput_Adapter::clearBatch() failed. Exiting abnormally

Code	300169
Severity	Error
Message	DBOutput_Adapter::createBatch() failed. Exiting abnormally
Description	DBOutput_Adapter::createBatch() failed. Exiting abnormally

Code	300170
Severity	Error
Message	DBOutput_Adapter::testBatch() commit failed
Description	DBOutput_Adapter::testBatch() commit failed

Code	300171
Severity	Debug
Message	DBOutput_Adapter::testBatch() ended
Description	DBOutput_Adapter::testBatch() ended

Code	300172
Severity	Debug
Message	DBOutput_Adapter::putNext() Entered
Description	DBOutput_Adapter::putNext() Entered

Code	300173
Severity	Debug
Message	DBOutput_Adapter::putNext() Stopping - Exited.
Description	DBOutput_Adapter::putNext() Stopping - Exited.

Code	300174
Severity	Debug
Message	DBOutput_Adapter::putNext() Row is NULL - Exited.
Description	DBOutput_Adapter::putNext() Row is NULL - Exited.

Code	300175
Severity	Error
Message	DBOutput_Adapter::putNext() fromRow Failed
Description	DBOutput_Adapter::putNext() fromRow Failed

Code	300176
Severity	Debug
Message	DBOutput_Adapter::putNext() Exited
Description	DBOutput_Adapter::putNext() Exited

Code	300177
Severity	Debug
Message	DBOutput_Adapter::putNext() Insert Statement:{0}
Description	DBOutput_Adapter::putNext() Insert Statement:{0}

Code	300178
Severity	Debug
Message	DBOutput_Adapter::putNext() Update Statement: {0}
Description	DBOutput_Adapter::putNext() Update Statement: {0}

Code	300179
Severity	Debug
Message	DBOutput_Adapter::putNext() Delete Statement: {0}
Description	DBOutput_Adapter::putNext() Delete Statement: {0}

Code	300180
Severity	Error
Message	DBOutput_Adapter::putNext unknown opcode
Description	DBOutput_Adapter::putNext unknown opcode

Code	300181
Severity	Error
Message	DBOutput_Adapter::putNext() Building SQL or Row Failed - see previous messages
Description	DBOutput_Adapter::putNext() Building SQL or Row Failed - see previous messages

Code	300182
Severity	Error
Message	DBOutput_Adapter::putNext() resetBatch failed with:{0}
Description	DBOutput_Adapter::putNext() resetBatch failed with:{0}

Code	300183
Severity	Error
Message	DBOutput_Adapter::putNext add to batch failed
Description	DBOutput_Adapter::putNext add to batch failed

Code	300184
Severity	Error
Message	DBOutput_Adapter::putNext() executeUpdateSQL Failed - see previous messages
Description	DBOutput_Adapter::putNext() executeUpdateSQL Failed - see previous messages

Code	300185
Severity	Debug
Message	DBOutput_Adapter::putNextKDB() Entered
Description	DBOutput_Adapter::putNextKDB() Entered

Code	300186
Severity	Debug
Message	DBOutput_Adapter::putNextKDB() InsertQ Statement:{0}
Description	DBOutput_Adapter::putNextKDB() InsertQ Statement:{0}

Code	300187
Severity	Debug
Message	DBOutput_Adapter::putNextKDB() UpdateQ Statement:{0}
Description	DBOutput_Adapter::putNextKDB() UpdateQ Statement:{0}

Code	300188
Severity	Debug
Message	DBOutput_Adapter::putNextKDB() DeleteQ Statement:{0}
Description	DBOutput_Adapter::putNextKDB() DeleteQ Statement:{0}

Code	300189
Severity	Error
Message	DBOutput_Adapter::putNextKDB unknown opcode {0}
Description	DBOutput_Adapter::putNextKDB unknown opcode {0}

Code	300190
Severity	Error
Message	DBOutput_Adapter::putNextKDB() executeUpdateSQL Failed - see previous messages
Description	DBOutput_Adapter::putNextKDB() executeUpdateSQL Failed - see previous messages

Code	300191
Severity	Debug
Message	DBOutput_Adapter::putNextKDB() Exited
Description	DBOutput_Adapter::putNextKDB() Exited

Code	300192
Severity	Debug
Message	DBOutput_Adapter::discoverTables() Entered
Description	DBOutput_Adapter::discoverTables() Entered

Code	300193
Severity	Error
Message	DBOutput_Adapter::discoverTables could not get table names
Description	DBOutput_Adapter::discoverTables could not get table names

Code	300194
Severity	Debug
Message	DBOutput_Adapter::discoverTables() Ended
Description	DBOutput_Adapter::discoverTables() Ended

Code	300195
Severity	Debug
Message	DBOutput_Adapter::discover() Entered
Description	DBOutput_Adapter::discover() Entered

Code	300196
Severity	Error
Message	DBOutput_Adapter::discover() passed an invalid (empty) table name
Description	DBOutput_Adapter::discover() passed an invalid (empty) table name

Code	300197
Severity	Error
Message	DBOutput_Adapter::discover() getTableNumColumns failed
Description	DBOutput_Adapter::discover() getTableNumColumns failed

Code	300198
Severity	Error
Message	DBOutput_Adapter::discover() ended abnormally
Description	DBOutput_Adapter::discover() ended abnormally

Code	300199
Severity	Error
Message	DBOutput_Adapter::discover() executeQuery select all query failed -
Description	DBOutput_Adapter::discover() executeQuery select all query failed -

Code	300200
Severity	Error
Message	DBOutput_Adapter::discover() table sampled appears to have no data.
Description	DBOutput_Adapter::discover() table sampled appears to have no data.

Code	300201
Severity	Debug
Message	DBOutput_Adapter::discover() ended normally
Description	DBOutput_Adapter::discover() ended normally

Code	300202
Severity	Error
Message	DBOutput_Adapter::discover() sample getData failed
Description	DBOutput_Adapter::discover() sample getData failed

Code	300203
Severity	Debug
Message	DBOutput_Adapter::purgePending() Entered
Description	DBOutput_Adapter::purgePending() Entered

Code	300204
Severity	Error
Message	DBOutput_Adapter::purgePending() executeBatch() {0} rows were not flushed. executeBatch failed
Description	DBOutput_Adapter::purgePending() executeBatch() {0} rows were not flushed. executeBatch failed

Code	300205
Severity	Error
Message	DBOutput_Adapter::purgePending() executeBatch() returned: {0} rows but we were expecting: {1} rows
Description	DBOutput_Adapter::purgePending() executeBatch() returned: {0} rows but we were expecting: {1} rows

Code	300206
Severity	Debug
Message	DBOutput_Adapter::purgePending() executeBatch() sql statements: {0} rows affected: {1} time: {2} seconds
Description	DBOutput_Adapter::purgePending() executeBatch() sql statements: {0} rows affected: {1} time: {2} seconds

Code	300207
Severity	Error
Message	DBOutput_Adapter::purgePending() executeBatch() error, returned <= 0 rows processed.
Description	DBOutput_Adapter::purgePending() executeBatch() error, returned <= 0 rows processed.

Code	300208
Severity	Debug
Message	DBOutput_Adapter::purgePending() Ended
Description	DBOutput_Adapter::purgePending() Ended

Code	300209
Severity	Debug
Message	DBOutput_Adapter::commitTransaction() Entered
Description	DBOutput_Adapter::commitTransaction() Entered

Code	300210
Severity	Error
Message	DBOutput_Adapter::commitTransaction commit() failed
Description	DBOutput_Adapter::commitTransaction commit() failed

Code	300211
Severity	Debug
Message	DBOutput_Adapter::commitTransaction() Exited
Description	DBOutput_Adapter::commitTransaction() Exited

Code	300212
Severity	Debug
Message	DBOutput_Adapter::putStartSync() Entered
Description	DBOutput_Adapter::putStartSync() Entered

Code	300213
Severity	Debug
Message	DBOutput_Adapter::putStartSync() Exited
Description	DBOutput_Adapter::putStartSync() Exited

Code	300214
Severity	Debug
Message	DBOutput_Adapter::putEndSync() Entered
Description	DBOutput_Adapter::putEndSync() Entered

Code	300215
Severity	Debug
Message	DBOutput_Adapter::putEndSync() Exited
Description	DBOutput_Adapter::putEndSync() Exited

Code	300216
Severity	Debug
Message	DBOutput_Adapter::resetConnection() Entered
Description	DBOutput_Adapter::resetConnection() Entered

Code	300217
Severity	Error
Message	DBOutput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed
Description	DBOutput_Adapter::resetConnection - Database manager is not initialized properly. Adapter initialization failed

Code	300218
Severity	Error
Message	DBOutput_Adapter::resetConnection() ended abnormally
Description	DBOutput_Adapter::resetConnection() ended abnormally

Code	300219
Severity	Error
Message	DBOutput_Adapter::resetConnection - Error getting connection from service
Description	DBOutput_Adapter::resetConnection - Error getting connection from service

Code	300220
Severity	Error
Message	- DBOutput_Adapter::resetConnection Adapter initialization failed
Description	- DBOutput_Adapter::resetConnection Adapter initialization failed

Code	300221
Severity	Debug
Message	DBOutput_Adapter::resetConnection() ended normally
Description	DBOutput_Adapter::resetConnection() ended normally

Code	300222
Severity	Debug
Message	DBOutput_Adapter::processParams() Entered
Description	DBOutput_Adapter::processParams() Entered

Code	300223
Severity	Error
Message	DBOutput_Adapter REQUIRED input 'service' property is empty.
Description	DBOutput_Adapter REQUIRED input 'service' property is empty.

Code	300224
Severity	Error
Message	DBOutput_Adapter 'table' is required when not in discovery mode
Description	DBOutput_Adapter 'table' is required when not in discovery mode

Code	300225
Severity	Error
Message	DBOutput_Adapter processParams call to resetConnection failed
Description	DBOutput_Adapter processParams call to resetConnection failed

Code	300226
Severity	Error
Message	Could not create connection for Service: {0}
Description	Could not create connection for Service: {0}

Code	300227
Severity	Error
Message	DBOutput_Adapter::processParams - Error getting connection from service
Description	DBOutput_Adapter::processParams - Error getting connection from service

Code	300228
Severity	Error
Message	- DBOutput_Adapter::processParams Adapter initialization failed
Description	- DBOutput_Adapter::processParams Adapter initialization failed

Code	300229
Severity	Debug
Message	DBOutput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS
Description	DBOutput_Adapter dateFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS

Code	300230
Severity	Debug
Message	DBOutput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS
Description	DBOutput_Adapter timestampFormat defaulted to YYYY-MM-DDTHH:MM:SS.SSS

Code	300231
Severity	Debug
Message	DBOutput_Adapter::processParams() onlyBase and outputBase conflict. outputBase set to true.
Description	DBOutput_Adapter::processParams() onlyBase and outputBase conflict. outputBase set to true.

Code	300232
Severity	Debug
Message	DBOutput_Adapter::processParams() batchLimit NOT Supported by KDB - defaulting to 1
Description	DBOutput_Adapter::processParams() batchLimit NOT Supported by KDB - defaulting to 1

Code	300233
Severity	Error
Message	DBOutput_Adapter batchLimit can not be zero or negative
Description	DBOutput_Adapter batchLimit can not be zero or negative

Code	300234
Severity	Debug
Message	DBOutput_Adapter::processParams() Ended
Description	DBOutput_Adapter::processParams() Ended

Code	300235
Severity	Debug
Message	DBOutput_Adapter::buildPermutation() Entered
Description	DBOutput_Adapter::buildPermutation() Entered

Code	300236
Severity	Error
Message	DBOutput_Adapter::buildPermutation() Set permutation string failed.
Description	DBOutput_Adapter::buildPermutation() Set permutation string failed.

Code	300237
Severity	Error
Message	DBOutput_Adapter::buildPermutation() Exited abnormally
Description	DBOutput_Adapter::buildPermutation() Exited abnormally

Code	300238
Severity	Error
Message	DBOutput_Adapter::buildPermutation() getNumColumns failed
Description	DBOutput_Adapter::buildPermutation() getNumColumns failed

Code	300239
Severity	Error
Message	DBOutput_Adapter::buildPermutation() getColumnInfo failed
Description	DBOutput_Adapter::buildPermutation() getColumnInfo failed

Code	300240
Severity	Error
Message	DBOutput_Adapter::buildPermutation() setExternalOrder failed
Description	DBOutput_Adapter::buildPermutation() setExternalOrder failed

Code	300241
Severity	Error
Message	DBOutput_Adapter::buildPermutation() setPlaceOrder failed
Description	DBOutput_Adapter::buildPermutation() setPlaceOrder failed

Code	300242
Severity	Error
Message	DBOutput_Adapter::buildPermutation() prepareOrder failed.
Description	DBOutput_Adapter::buildPermutation() prepareOrder failed.

Code	300243
Severity	Warning
Message	Output_Adapter::buildPermutation() WARNING Key column(s){0} do not pass through field mapping, may cause duplicate records
Description	Output_Adapter::buildPermutation() WARNING Key column(s){0} do not pass through field mapping, may cause duplicate records

Code	300244
Severity	Error
Message	DBOutput_Adapter::buildPermutation() permutation not required
Description	DBOutput_Adapter::buildPermutation() permutation not required

Code	300245
Severity	Debug
Message	DBOutput_Adapter::buildPermutation() Exited normally
Description	DBOutput_Adapter::buildPermutation() Exited normally

Code	300246
Severity	Debug
Message	DBOutput_Adapter::truncateTable() Entered
Description	DBOutput_Adapter::truncateTable() Entered

Code	300247
Severity	Error
Message	DBOutput_Adapter::truncateTable pre-commit() failed
Description	DBOutput_Adapter::truncateTable pre-commit() failed

Code	300248
Severity	Error
Message	DBOutput_Adapter::truncateTable - tuncate[{0}] not successful
Description	DBOutput_Adapter::truncateTable - tuncate[{0}] not successful

Code	300249
Severity	Debug
Message	DBOutput_Adapter::truncateTable() Ended
Description	DBOutput_Adapter::truncateTable() Ended

Code	300250
Severity	Debug
Message	DBOutput_Adapter::constructInsertQ() Entered
Description	DBOutput_Adapter::constructInsertQ() Entered

Code	300251
Severity	Error
Message	DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema.
Description	DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema.

Code	300252
Severity	Debug
Message	DBOutput_Adapter::constructInsertQ() Exited
Description	DBOutput_Adapter::constructInsertQ() Exited

Code	300253
Severity	Debug
Message	DBOutput_Adapter::constructUpdateQ() Entered
Description	DBOutput_Adapter::constructUpdateQ() Entered

Code	300254
Severity	Error
Message	DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema.
Description	DBOutput_Adapter::constructInsertQ() - to construct a Q statement, we need the _exportMap to be the same size as out schema.

Code	300255
Severity	Debug
Message	DBOutput_Adapter::constructUpdateQ() Exited
Description	DBOutput_Adapter::constructUpdateQ() Exited

Code	300256
Severity	Debug
Message	DBOutput_Adapter::constructDeleteQ() Entered
Description	DBOutput_Adapter::constructDeleteQ() Entered

Code	300257
Severity	Error
Message	DBOutput_Adapter::constructDeleteQ() ERROR - to construct a Q statement, we need the _exportMap to be the same size as out schema.
Description	DBOutput_Adapter::constructDeleteQ() ERROR - to construct a Q statement, we need the _exportMap to be the same size as out schema.

Code	300258
Severity	Debug
Message	DBOutput_Adapter::constructDeleteQ() Exited
Description	DBOutput_Adapter::constructDeleteQ() Exited

Code	300259
Severity	Debug
Message	DBOutput_Adapter::constructInsertSQL() Entered
Description	DBOutput_Adapter::constructInsertSQL()

Code	300260
Severity	Debug
Message	DBOutput_Adapter::constructInsertSQL() Exited
Description	DBOutput_Adapter::constructInsertSQL() Exited

Code	300261
Severity	Debug
Message	DBOutput_Adapter::constructUpdateSQL() Entered
Description	DBOutput_Adapter::constructUpdateSQL() Entered

Code	300262
Severity	Debug
Message	DBOutput_Adapter::constructUpdateSQL() Exited
Description	DBOutput_Adapter::constructUpdateSQL() Exited

Code	300263
Severity	Debug
Message	DBOutput_Adapter::constructDeleteSQL() Entered
Description	DBOutput_Adapter::constructDeleteSQL() Entered

Code	300264
Severity	Debug
Message	DBOutput_Adapter::constructDeleteSQL() Exited
Description	DBOutput_Adapter::constructDeleteSQL() Exited

Code	300265
Severity	Debug
Message	DBOutput_Adapter::executeUpdateSQL() Entered
Description	DBOutput_Adapter::executeUpdateSQL() Entered

Code	300266
Severity	Error
Message	DBOutput_Adapter::executeUpdateSQL() executeUpdate not successful for [{0}] update count of: {1}
Description	DBOutput_Adapter::executeUpdateSQL() executeUpdate not successful for [{0}] update count of: {1}

Code	300267
Severity	Debug
Message	DBOutput_Adapter::executeUpdateSQL()Query update/insert row count: {0}
Description	DBOutput_Adapter::executeUpdateSQL()Query update/insert row count: {0}

Code	300268
Severity	Error
Message	DBOutput_Adapter::executeUpdateSQL() commit not successful
Description	DBOutput_Adapter::executeUpdateSQL() commit not successful

Code	300269
Severity	Debug
Message	DBOutput_Adapter::executeUpdateSQL() Exited
Description	DBOutput_Adapter::executeUpdateSQL() Exited

Code	300270
Severity	Debug
Message	DBOutput_Adapter::ORIGexecuteUpdateSQL() Entered
Description	DBOutput_Adapter::ORIGexecuteUpdateSQL() Entered

Code	300271
Severity	Error
Message	DBOutput_Adapter::ORIGexecuteUpdateSQL() executeUpdate not successful for [{0}] update count of: {1}
Description	DBOutput_Adapter::ORIGexecuteUpdateSQL() executeUpdate not successful for [{0}] update count of: {1}

Code	300272
Severity	Debug
Message	DBOutput_Adapter::ORIGexecuteUpdateSQL()Query update/insert row count: {0}
Description	DBOutput_Adapter::ORIGexecuteUpdateSQL()Query update/insert row count: {0}

Code	300273
Severity	Error
Message	DBOutput_Adapter::ORIGexecuteUpdateSQL() commit not successful
Description	DBOutput_Adapter::ORIGexecuteUpdateSQL() commit not successful

Code	300274
Severity	Debug
Message	DBOutput_Adapter::ORIGexecuteUpdateSQL() Exited
Description	DBOutput_Adapter::ORIGexecuteUpdateSQL() Exited

Code	300275
Severity	Debug
Message	DBOutput_Adapter::resetBatch() Entered
Description	DBOutput_Adapter::resetBatch() Entered

Code	300276
Severity	Error
Message	DBOutput_Adapter::clearBatch() failed. Exiting abnormally
Description	DBOutput_Adapter::clearBatch() failed. Exiting abnormally

Code	300277
Severity	Debug
Message	DBOutput_Adapter::resetBatch() Exited
Description	DBOutput_Adapter::resetBatch() Exited

Code	300278
Severity	Error
Message	Unknown element in conversion mapping string < {0} >
Description	Unknown element in conversion mapping string < {0} >

Code	300279
Severity	Debug
Message	DBOutput_Adapter::putNext() Exited
Description	DBOutput_Adapter::putNext() Exited

Code	300280
Severity	Debug
Message	~JmsInAdapter()
Description	~JmsInAdapter()

Code	300281
Severity	Debug
Message	JmsInAdapter::reset()
Description	JmsInAdapter::reset()

Code	300282
Severity	Debug
Message	JmsInAdapter::canDiscover()
Description	JmsInAdapter::canDiscover()

Code	300283
Severity	Debug
Message	JmsInAdapter::getNext()
Description	JmsInAdapter::getNext()

Code	300284
Severity	Debug
Message	JmsInAdapter: rowBuf->size() == 0
Description	JmsInAdapter: rowBuf->size() == 0

Code	300285
Severity	Debug
Message	JmsInAdapter::putNext()
Description	JmsInAdapter::putNext()

Code	300286
Severity	Debug
Message	JmsInAdapter::stop()
Description	JmsInAdapter::stop()

Code	300287
Severity	Debug
Message	JmsInAdapter::parseCsvMessage()
Description	JmsInAdapter::parseCsvMessage()

Code	300288
Severity	Error
Message	Message {0} contains no stream name
Description	Message {0} contains no stream name

Code	300289
Severity	Error
Message	Message {0} contains no stream opcode
Description	Message {0} contains no stream opcode

Code	300290
Severity	Debug
Message	JmsInAdapter::parseCsvMessage() returning
Description	JmsInAdapter::parseCsvMessage() returning

Code	300291
Severity	Debug
Message	JmsInAdapter::parseXmlMessage()
Description	JmsInAdapter::parseXmlMessage()

Code	300292
Severity	Error
Message	Parsing of XML message failed: bad element
Description	Parsing of XML message failed: bad element

Code	300293
Severity	Error
Message	Bad attribute at offset {0}
Description	Bad attribute at offset {0}

Code	300294
Severity	Debug
Message	JmsInAdapter::discover()
Description	JmsInAdapter::discover()

Code	300295
Severity	Debug
Message	JmsInAdapter::discoverXml()
Description	JmsInAdapter::discoverXml()

Code	300296
Severity	Debug
Message	JmsInAdapter::discoverCsv()
Description	JmsInAdapter::discoverCsv()

Code	300297
Severity	Debug
Message	JmsInAdapter::discoverFix()
Description	JmsInAdapter::discoverFix()

Code	300298
Severity	Error
Message	Tag %s not found in FIX dictionary
Description	Tag %s not found in FIX dictionary

Code	300299
Severity	Debug
Message	JmsInAdapter::discoverObjectArray()
Description	JmsInAdapter::discoverObjectArray()

Code	300300
Severity	Debug
Message	JmsInAdapter::discoverCustom()
Description	JmsInAdapter::discoverCustom()

Code	300301
Severity	Debug
Message	JmsInAdapter::addRowToDiscovery()
Description	JmsInAdapter::addRowToDiscovery()

Code	300302
Severity	Debug
Message	JmsInAdapter::makeDiscoveredFieldTypes()
Description	JmsInAdapter::makeDiscoveredFieldTypes()

Code	300303
Severity	Debug
Message	JmsInAdapter::makeDiscoveredRows()
Description	JmsInAdapter::makeDiscoveredRows()

Code	300304
Severity	Debug
Message	JmsInAdapter::getParams()
Description	JmsInAdapter::getParams()

Code	300305
Severity	Error
Message	Empty delimiter
Description	Empty delimiter

Code	300306
Severity	Error
Message	Empty converter class name
Description	Empty converter class name

Code	300307
Severity	Error
Message	Unknown data format: {0}
Description	Unknown data format: {0}

Code	300308
Severity	Error
Message	JMS Adapter: No jndiContextFactory specified.
Description	JMS Adapter: No jndiContextFactory specified.

Code	300309
Severity	Error
Message	JMS Adapter: No jndiURL specified.
Description	JMS Adapter: No jndiURL specified.

Code	300310
Severity	Debug
Message	~JmsOutAdapter()
Description	~JmsOutAdapter()

Code	300311
Severity	Debug
Message	JmsOutAdapter::reset()
Description	JmsOutAdapter::reset()

Code	300312
Severity	Error
Message	Control Stream not found
Description	Control Stream not found

Code	300313
Severity	Debug
Message	JmsOutAdapter::canDiscover()
Description	JmsOutAdapter::canDiscover()

Code	300314
Severity	Debug
Message	JmsOutAdapter::getNext()
Description	JmsOutAdapter::getNext()

Code	300315
Severity	Debug
Message	JmsOutAdapter::putNext()
Description	JmsOutAdapter::putNext()

Code	300316
Severity	Debug
Message	JmsOutAdapter::commitTransaction()
Description	JmsOutAdapter::commitTransaction()

Code	300317
Severity	Debug
Message	Control Stream update failed
Description	Control Stream update failed

Code	300318
Severity	Debug
Message	JmsOutAdapter::makeCsvMessage()
Description	JmsOutAdapter::makeCsvMessage()

Code	300319
Severity	Debug
Message	JmsOutAdapter::makeXmlMessage()
Description	JmsOutAdapter::makeXmlMessage()

Code	300320
Severity	Debug
Message	Warning: '{0}' opcode not supported by FIX outbound connector
Description	Warning: '{0}' opcode not supported by FIX outbound connector

Code	300321
Severity	Debug
Message	JmsOutAdapter::stop()
Description	JmsOutAdapter::stop()

Code	300322
Severity	Debug
Message	JmsOutAdapter::getParams()
Description	JmsOutAdapter::getParams()

Code	300323
Severity	Error
Message	Empty delimiter
Description	Empty delimiter

Code	300324
Severity	Error
Message	Empty converter class name
Description	Empty converter class name

Code	300325
Severity	Error
Message	Unknown data format: {0}
Description	Unknown data format: {0}

Code	300326
Severity	Error
Message	JMS Output Adapter: No gdKeyColumnName entered for Adapter.
Description	JMS Output Adapter: No gdKeyColumnName entered for Adapter.

Code	300327
Severity	Error
Message	JMS Output Adapter: No opcodeColumnName entered for Adapter.
Description	JMS Output Adapter: No opcodeColumnName entered for Adapter.

Code	300328
Severity	Error
Message	JMS Output Adapter: No truncate stream name entered for Adapter.
Description	JMS Output Adapter: No truncate stream name entered for Adapter.

Code	300329
Severity	Error
Message	JMS Output Adapter: No purge interval entered for Adapter.
Description	JMS Output Adapter: No purge interval entered for Adapter.

Code	300330
Severity	Error
Message	JMS Output Adapter: No batch size entered for Adapter.
Description	JMS Output Adapter: No batch size entered for Adapter.

Code	300331
Severity	Error
Message	Bad column property mapping: {0}
Description	Bad column property mapping: {0}

Code	300332
Severity	Error
Message	Bad column name: {0}
Description	Bad column name: {0}

Code	300333
Severity	Debug
Message	JmsOutAdapter::makeFixMessage()
Description	JmsOutAdapter::makeFixMessage()

Code	300334
Severity	Debug
Message	RandomTupleGenInAdapter.getNext
Description	RandomTupleGenInAdapter.getNext

Code	300335
Severity	Debug
Message	RandomTupleGenInAdapter.getNext end
Description	RandomTupleGenInAdapter.getNext end

Code	300336
Severity	Debug
Message	RandomTupleGenInAdapter.sendOneRow
Description	RandomTupleGenInAdapter.sendOneRow

Code	300337
Severity	Debug
Message	RandomTupleGenInAdapter.sendOneRow end
Description	RandomTupleGenInAdapter.sendOneRow end

Code	300338
Severity	Debug
Message	RandomTupleGenInAdapter.start()
Description	RandomTupleGenInAdapter.start()

Code	300339
Severity	Debug
Message	RandomTupleGenInAdapter.start() ended
Description	RandomTupleGenInAdapter.start() ended

Code	300340
Severity	Debug
Message	RandomTupleGenInAdapter.stop()
Description	RandomTupleGenInAdapter.stop()

Code	300341
Severity	Debug
Message	RandomTupleGenInAdapter.stop() ended
Description	RandomTupleGenInAdapter.stop() ended

Code	300342
Severity	Debug
Message	RandomTupleGenInAdapter.reset
Description	RandomTupleGenInAdapter.reset

Code	300343
Severity	Error
Message	Rate has an invalid value:{0}
Description	Rate has an invalid value:{0}

Code	300344
Severity	Warning
Message	{0} is larger than Rate Maxmium and set to Rate Maxmium {1}
Description	{0} is larger than Rate Maxmium and set to Rate Maxmium {1}

Code	300345
Severity	Info
Message	Rate does not exist and set it to default: {0}
Description	Rate does not exist and set it to default: {0}

Code	300346
Severity	Error
Message	RowCount has an invalid value: {0}
Description	RowCount has an invalid value: {0}

Code	300347
Severity	Warning
Message	{0} is larger than maxmium RowCount and set it to max RowCount {1}
Description	{0} is larger than maxmium RowCount and set it to max RowCount {1}

Code	300348
Severity	Info
Message	RowCount does not exist, set to default RowCount {0}
Description	RowCount does not exist, set to default RowCount {0}

Code	300349
Severity	Error
Message	TimestampBase has an invalid value: {0}
Description	TimestampBase has an invalid value: {0}

Code	300350
Severity	Info
Message	use current time as TimestampBase
Description	use current time as TimestampBase

Code	300351
Severity	Debug
Message	RandomTupleGenInAdapter.reset end
Description	RandomTupleGenInAdapter.reset end

Code	300352
Severity	Debug
Message	RandomTupleGenInAdapter.sleepWhile()
Description	RandomTupleGenInAdapter.sleepWhile()

Code	300353
Severity	Debug
Message	RandomTupleGenInAdapter.sleepWhile() end
Description	RandomTupleGenInAdapter.sleepWhile() end

Code	300354
Severity	Error
Message	Non supported type {0} in {1}
Description	Non supported type {0} in {1}

Code	300355
Severity	Debug
Message	adding table: \|{0}\| _md.size() = {1}
Description	adding table: \|{0}\| _md.size() = {1}

Code	300356
Severity	Debug
Message	table: \|{0}\| already in map, not adding.
Description	table: \|{0}\| already in map, not adding.

Code	300357
Severity	Debug
Message	searched, t: \| {0} \|
Description	searched, t: \| {0} \|

Code	300358
Severity	Error
Message	collectTag - whitespace may not follow emelent opening <
Description	collectTag - whitespace may not follow emelent opening <

Code	300359
Severity	Error
Message	unknown state: {0} in collectTag.
Description	unknown state: {0} in collectTag.

Code	300360
Severity	Error
Message	docClosedCheck outermost tags must be <discover> ... </discover>
Description	docClosedCheck outermost tags must be <discover> ... </discover>

Code	300361
Severity	Error
Message	saw </discover> without first seeing <discover>
Description	saw </discover> without first seeing <discover>

Code	300362
Severity	Error
Message	parseDiscFile() could not open file: {0}
Description	parseDiscFile() could not open file: {0}

Code	300363
Severity	Error
Message	could not find the name attribute in <table ... >
Description	could not find the name attribute in <table ... >

Code	300364
Severity	Error
Message	saw </table> without a preceeding <table ... >
Description	saw </table> without a preceeding <table ... >

Code	300365
Severity	Error
Message	cannot nest <discover> elements.
Description	cannot nest <discover> elements.

Code	300366
Severity	Error
Message	Parse error, bad tag \|{0}\| looking for </discover> or <table>
Description	Parse error, bad tag \|{0}\| looking for </discover> or <table>

Code	300367
Severity	Error
Message	could not find the name attribute in <column ... />
Description	could not find the name attribute in <column ... />

Code	300368
Severity	Error
Message	could not find the type attribute in <column ... />
Description	could not find the type attribute in <column ... />

Code	300369
Severity	Error
Message	only <column .... /> is supported, withing a <table ...> ... </table>
Description	only <column .... /> is supported, withing a <table ...> ... </table>

Code	300370
Severity	Error
Message	parse error, <column .../> is the only element allowed in a <table> ... </table> construct.
Description	parse error, <column .../> is the only element allowed in a <table> ... </table> construct.

Code	300371
Severity	Error
Message	parsing discover.xml failed. Error: {0}
Description	parsing discover.xml failed. Error: {0}

Code	300372
Severity	Error
Message	parse completed sucessfully.
Description	parse completed sucessfully.

Code	300373
Severity	Error
Message	Fatal error in initializing XML Parser: {0}
Description	Fatal error in initializing XML Parser: {0}

Code	300374
Severity	Error
Message	Failed to open discovery file: {0}
Description	Failed to open discovery file: {0}

Code	300375
Severity	Error
Message	Error parsing file : {0}
Description	Error parsing file : {0}

Code	300376
Severity	Error
Message	Discover xml does not have discover tag as root tag.
Description	Discover xml does not have discover tag as root tag.

Code	300377
Severity	Error
Message	Discover xml does not have an error tag under root discover tag.
Description	Discover xml does not have an error tag under root discover tag.

Code	300378
Severity	Error
Message	Discover xml does not have any error message under error tag.
Description	Discover xml does not have any error message under error tag.

Code	300379
Severity	Debug
Message	SimpleExtAdapter.reset
Description	SimpleExtAdapter.reset

Code	300380
Severity	Debug
Message	SimpleExtAdapter.reset end
Description	SimpleExtAdapter.reset end

Code	300381
Severity	Debug
Message	SimpleExtAdapter.start
Description	SimpleExtAdapter.start

Code	300382
Severity	Error
Message	The execution command {0} returned code: {1}
Description	The execution command {0} returned code: {1}

Code	300383
Severity	Debug
Message	SimpleExtAdapter.start end
Description	SimpleExtAdapter.start end

Code	300384
Severity	Error
Message	Failed to clean up, command '{0}' returned code {1}
Description	Failed to clean up, command '{0}' returned code {1}

Code	300385
Severity	Debug
Message	SimpleExtAdapter.stop
Description	SimpleExtAdapter.stop

Code	300386
Severity	Error
Message	The stop command parameter is empty, stop request ignored
Description	The stop command parameter is empty, stop request ignored

Code	300387
Severity	Error
Message	Failed to stop, command '{0}' returned code {1}
Description	Failed to stop, command '{0}' returned code {1}

Code	300388
Severity	Error
Message	Repeating an attempt to stop
Description	Repeating an attempt to stop

Code	300389
Severity	Debug
Message	SimpleExtAdapter.stop end
Description	SimpleExtAdapter.stop end

Code	300390
Severity	Debug
Message	SimpleExtAdapter.discoverTables
Description	SimpleExtAdapter.discoverTables

Code	300391
Severity	Error
Message	Error: Connection is not enabled for discovery.
Description	Error: Connection is not enabled for discovery.

Code	300392
Severity	Error
Message	Missing parameters for table discovery
Description	Missing parameters for table discovery

Code	300393
Severity	Error
Message	about to call system {0}
Description	about to call system {0}

Code	300394
Severity	Error
Message	returned with res {0}
Description	returned with res {0}

Code	300395
Severity	Error
Message	Failed to discover, command '{0}' returned code {1}
Description	Failed to discover, command '{0}' returned code {1}

Code	300396
Severity	Error
Message	Failed to parse discovery file: {0}
Description	Failed to parse discovery file: {0}

Code	300397
Severity	Debug
Message	parse of file suceeded...
Description	parse of file suceeded...

Code	300398
Severity	Error
Message	parse of file failed...
Description	parse of file failed...

Code	300399
Severity	Error
Message	Failed to parse discovery file: {0}
Description	Failed to parse discovery file: {0}

Code	300400
Severity	Debug
Message	SimpleExtAdapter.discoverTables end
Description	SimpleExtAdapter.discoverTables end

Code	300401
Severity	Debug
Message	SimpleExtAdapter.discover
Description	SimpleExtAdapter.discover

Code	300402
Severity	Error
Message	Failed to discover( {0} )
Description	Failed to discover( {0} )

Code	300403
Severity	Error
Message	Failed to discover{0}, table name is not among discovered tables.;
Description	Failed to discover{0}, table name is not among discovered tables.;

Code	300404
Severity	Debug
Message	SimpleExtAdapter.discover end
Description	SimpleExtAdapter.discover end

Code	300405
Severity	Debug
Message	SimpleExtAdapter.processParams
Description	SimpleExtAdapter.processParams

Code	300406
Severity	Error
Message	_discFile template is:{0}
Description	_discFile template is:{0}

Code	300407
Severity	Error
Message	The Execute Command property is empty, can not run
Description	The Execute Command property is empty, can not run

Code	300408
Severity	Error
Message	Can not create parameter file '{0}' : {1}
Description	Can not create parameter file '{0}' : {1}

Code	300409
Severity	Error
Message	Error writing parameter file '{0}' : {1}
Description	Error writing parameter file '{0}' : {1}

Code	300410
Severity	Error
Message	Failed to configure the parameters, command '{0}' returned code: {1}
Description	Failed to configure the parameters, command '{0}' returned code: {1}

Code	300411
Severity	Debug
Message	SimpleExtAdapter.processParams end
Description	SimpleExtAdapter.processParams end

Code	300412
Severity	Error
Message	Unknown file format '{0}'
Description	Unknown file format '{0}'

Code	300413
Severity	Debug
Message	~SmtpOut_Adapter()
Description	~SmtpOut_Adapter()

Code	300414
Severity	Debug
Message	SmtpOut_Adapter::reset()
Description	SmtpOut_Adapter::reset()

Code	300415
Severity	Debug
Message	SmtpOut_Adapter::canDiscover()
Description	SmtpOut_Adapter::canDiscover()

Code	300416
Severity	Debug
Message	SmtpOut_Adapter::getNext()
Description	SmtpOut_Adapter::getNext()

Code	300417
Severity	Debug
Message	SmtpOut_Adapter::putNext()
Description	SmtpOut_Adapter::putNext()

Code	300418
Severity	Debug
Message	SmtpOut_Adapter::commitTransaction()
Description	SmtpOut_Adapter::commitTransaction()

Code	300419
Severity	Debug
Message	SmtpOut_Adapter::stop()
Description	SmtpOut_Adapter::stop()

Code	300420
Severity	Debug
Message	SmtpOut_Adapter::getParams()
Description	SmtpOut_Adapter::getParams()

Code	300421
Severity	Error
Message	No JVM instance found
Description	No JVM instance found

Code	300422
Severity	Error
Message	Cannot attach thread to JVM
Description	Cannot attach thread to JVM

Code	300423
Severity	Error
Message	ERROR: Configuration file argument cannot be empty.
Description	ERROR: Configuration file argument cannot be empty.

Code	300424
Severity	Error
Message	ERROR: The field seperator cannot be more than one character long.
Description	ERROR: The field seperator cannot be more than one character long.

Code	300425
Severity	Error
Message	ERROR: Must specify the user name if using Pam or Kerberos authentication.
Description	ERROR: Must specify the user name if using Pam or Kerberos authentication.

Code	300426
Severity	Error
Message	The ESP_HOME environment variable has not been set. Set this variable and retry
Description	The ESP_HOME environment variable has not been set. Set this variable and retry

Code	300427
Severity	Error
Message	ERROR: Unable to start the connector using the command line. {0}
Description	ERROR: Unable to start the connector using the command line. {0}

Code	300428
Severity	Error
Message	ERROR: Unable to start the connector using the command line(Error {0}). {1}
Description	ERROR: Unable to start the connector using the command line(Error {0}). {1}

Code	300429
Severity	Error
Message	The argument list exceeds the system limit.
Description	The argument list exceeds the system limit.

Code	300430
Severity	Error
Message	The specified file has a locking or sharing violation.
Description	The specified file has a locking or sharing violation.

Code	300431
Severity	Error
Message	The file or path name not found.
Description	The file or path name not found.

Code	300432
Severity	Error
Message	Not enough memory is available to execute the adapter.
Description	Not enough memory is available to execute the adapter.

Code	300433
Severity	Error
Message	ERROR: Unable to start the connector using the command line. {0} {1}
Description	ERROR: Unable to start the connector using the command line. {0} {1}

Code	300434
Severity	Warning
Message	WARNING: The external esp_iqloader process was stopped before the stop request was made.
Description	WARNING: The external esp_iqloader process was stopped before the stop request was made.

Code	300435
Severity	Warning
Message	WARNING: Error {0} occured when trying to stop the external esp_iqloader process. Ignoring it.
Description	WARNING: Error {0} occured when trying to stop the external esp_iqloader process. Ignoring it.

Code	300436
Severity	Warning
Message	WARNING: The process {0} has not stopped in 5 seconds. Retrying...{1}
Description	WARNING: The process {0} has not stopped in 5 seconds. Retrying...{1}

Code	300437
Severity	Warning
Message	WARNING: Unable to stop the process {0}. Forcefully terminating it.
Description	WARNING: Unable to stop the process {0}. Forcefully terminating it.

Code	300438
Severity	Error
Message	Error {0} occured while trying to determine if process is running.
Description	Error {0} occured while trying to determine if process is running.

Code	300439
Severity	Error
Message	Encountered a complex XML element <{0}>, unsupported
Description	Encountered a complex XML element <{0}>, unsupported

Code	300440
Severity	Error
Message	parseDSV(): could not read a complete line, line: {0}
Description	parseDSV(): could not read a complete line, line: {0}

Code	300441
Severity	Error
Message	parseDSV(): not enough fields, at line: {0}
Description	parseDSV(): not enough fields, at line: {0}

Code	300442
Severity	Error
Message	discoveryDSV(): could not read a complete line
Description	discoveryDSV(): could not read a complete line

Code	300443
Severity	Error
Message	Internal error: parameter '{0}' has an unsupported value '{1}'
Description	Internal error: parameter '{0}' has an unsupported value '{1}'

Code	300444
Severity	Error
Message	Missing parameters for column discovery
Description	Missing parameters for column discovery

Code	300445
Severity	Error
Message	Discovery is not supported for the socket connections.
Description	Discovery is not supported for the socket connections.

Code	300446
Severity	Error
Message	permutation does not match the header line in file:{0}
Description	permutation does not match the header line in file:{0}

Code	300447
Severity	Error
Message	the header in file is: '{0}'
Description	the header in file is: '{0}'

Code	300448
Severity	Error
Message	Internal error: could not get parameter '{0}'
Description	Internal error: could not get parameter '{0}'

Code	300449
Severity	Error
Message	could not get parameter 'file'
Description	could not get parameter 'file'

Code	300450
Severity	Error
Message	reset(): could not read file '{0}'
Description	reset(): could not read file '{0}'

Code	300451
Severity	Error
Message	With a negative port value the ephemeral port file name must be set
Description	With a negative port value the ephemeral port file name must be set

Code	300452
Severity	Error
Message	Must not be empty when port < 0
Description	Must not be empty when port < 0

Code	300453
Severity	Error
Message	could not open connection to {0}{1}
Description	could not open connection to {0}{1}

Code	300454
Severity	Error
Message	the host name may not be specified for an incoming socket
Description	the host name may not be specified for an incoming socket

Code	300455
Severity	Error
Message	could not set up the server socket
Description	could not set up the server socket

Code	300456
Severity	Error
Message	Internal error: direction unknown value '{0}'
Description	Internal error: direction unknown value '{0}'

Code	300457
Severity	Error
Message	Internal error: srcType unknown value '{0}'
Description	Internal error: srcType unknown value '{0}'

Code	300458
Severity	Error
Message	no such field in the stream
Description	no such field in the stream

Code	300459
Severity	Error
Message	auto-repeat may not be used together with polling
Description	auto-repeat may not be used together with polling

Code	300460
Severity	Error
Message	Missing parameters for table discovery
Description	Missing parameters for table discovery

Code	300461
Severity	Error
Message	Discovery is not supported for the socket connections.
Description	Discovery is not supported for the socket connections.

Code	300462
Severity	Error
Message	Can not look up files: {0}
Description	Can not look up files: {0}

Code	300463
Severity	Error
Message	unknown value
Description	unknown value

Code	300464
Severity	Error
Message	Internal error: parameter '{0}' has an unsupported value '{1}'
Description	Internal error: parameter '{0}' has an unsupported value '{1}'

Code	300465
Severity	Error
Message	Missing parameters for table discovery
Description	Missing parameters for table discovery

Code	300466
Severity	Error
Message	Discovery is not supported for the socket connections.
Description	Discovery is not supported for the socket connections.

Code	300467
Severity	Error
Message	Discovery is not supported for the socket connections
Description	Discovery is not supported for the socket connections

Code	300468
Severity	Error
Message	Missing parameters for column discovery
Description	Missing parameters for column discovery

Code	300469
Severity	Error
Message	Unable to write the ephemeral port number to '{0}':
Description	Unable to write the ephemeral port number to '{0}':

Code	300470
Severity	Error
Message	Internal error: SocketIo object not created
Description	Internal error: SocketIo object not created

Code	300471
Severity	Error
Message	Internal error: could not get parameter '{0}'
Description	Internal error: could not get parameter '{0}'

Code	300472
Severity	Error
Message	could not get parameter 'file'
Description	could not get parameter 'file'

Code	300473
Severity	Error
Message	With a negative port value the ephemeral port file name must be set
Description	With a negative port value the ephemeral port file name must be set

Code	300474
Severity	Error
Message	Must not be empty when port < 0
Description	Must not be empty when port < 0

Code	300475
Severity	Error
Message	the host name may not be specified for an incoming socket
Description	the host name may not be specified for an incoming socket

Code	300476
Severity	Error
Message	Internal error: direction unknown value '{0}'
Description	Internal error: direction unknown value '{0}'

Code	300477
Severity	Error
Message	Internal error: srcType unknown value '{1}'
Description	Internal error: srcType unknown value '{1}'

Code	300478
Severity	Error
Message	the host name may not be specified for an incoming socket
Description	the host name may not be specified for an incoming socket

Code	300479
Severity	Error
Message	stopping on file write error: {0}
Description	stopping on file write error: {0}

Code	300480
Severity	Debug
Message	WebSphere MQ Input Adapter: reset()
Description	WebSphere MQ Input Adapter: reset()

Code	300481
Severity	Error
Message	WebSphere MQ Input Adapter: No Channel entered for MQ Server.
Description	WebSphere MQ Input Adapter: No Channel entered for MQ Server.

Code	300482
Severity	Error
Message	WebSphere MQ Input Adapter: No QueueName entered for MQ Server.
Description	WebSphere MQ Input Adapter: No QueueName entered for MQ Server.

Code	300483
Severity	Error
Message	WebSphere MQ Input Adapter: No QueueManagerName entered for MQ Server.
Description	WebSphere MQ Input Adapter: No QueueManagerName entered for MQ Server.

Code	300484
Severity	Error
Message	WebSphere MQ Input Adapter: No MaxBufferSize entered for MQ Server.
Description	WebSphere MQ Input Adapter: No MaxBufferSize entered for MQ Server.

Code	300485
Severity	Error
Message	WebSphere MQ Input Adapter: No SystemName entered for MQ Server.
Description	WebSphere MQ Input Adapter: No SystemName entered for MQ Server.

Code	300486
Severity	Error
Message	WebSphere MQ Input Adapter: No Port entered for MQ Server.
Description	WebSphere MQ Input Adapter: No Port entered for MQ Server.

Code	300487
Severity	Error
Message	WSMQ In Adapter: Unable to reconnect to MQ.
Description	WSMQ In Adapter: Unable to reconnect to MQ.

Code	300488
Severity	Error
Message	WSMQ In Adapter: MQGET ended with reason code {0}
Description	WSMQ In Adapter: MQGET ended with reason code {0}

Code	300489
Severity	Debug
Message	WSMQ In Adapter: OpenMQChannel()
Description	WSMQ In Adapter: OpenMQChannel()

Code	300490
Severity	Error
Message	WSMQ In Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3}
Description	WSMQ In Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3}

Code	300491
Severity	Error
Message	WSMQ In Adapter: MQCONNX ended with reason code {0}
Description	WSMQ In Adapter: MQCONNX ended with reason code {0}

Code	300492
Severity	Error
Message	WSMQ In Adapter: MQCONNX failed with reason code {0}
Description	WSMQ In Adapter: MQCONNX failed with reason code {0}

Code	300493
Severity	Error
Message	WSMQ In Adapter: MQOPEN unable to open queue for input. Reason: {0}
Description	WSMQ In Adapter: MQOPEN unable to open queue for input. Reason: {0}

Code	300494
Severity	Error
Message	WSMQ In Adapter: MQOPEN unable to open queue for input.
Description	WSMQ In Adapter: MQOPEN unable to open queue for input.

Code	300495
Severity	Error
Message	WSMQ In Adapter: HandleMessage:{0}
Description	WSMQ In Adapter: HandleMessage:{0}

Code	300496
Severity	Error
Message	WSMQ In Adapter: Column size in the received message and the schema do not match. Ignoring this message.
Description	WSMQ In Adapter: Column size in the received message and the schema do not match. Ignoring this message.

Code	300497
Severity	Error
Message	Message contains no stream name
Description	Message contains no stream name

Code	300498
Severity	Error
Message	Stream name in the message received does not match with the name of the stream
Description	Stream name in the message received does not match with the name of the stream

Code	300499
Severity	Error
Message	Message contains no stream opcode
Description	Message contains no stream opcode

Code	300500
Severity	Debug
Message	{0} the column of {1} the row is {2}
Description	{0} the column of {1} the row is {2}

Code	300501
Severity	Error
Message	WSMQ In Adapter: MQCLOSE ended with reason code {0}
Description	WSMQ In Adapter: MQCLOSE ended with reason code {0}

Code	300502
Severity	Debug
Message	WSMQ Out Adapter: putNext()
Description	WSMQ Out Adapter: putNext()

Code	300503
Severity	Error
Message	Control Stream update failed
Description	Control Stream update failed

Code	300504
Severity	Debug
Message	WSMQ Out Adapter: wsmq_send_message(): i_str: {0}
Description	WSMQ Out Adapter: wsmq_send_message(): i_str: {0}

Code	300505
Severity	Debug
Message	WSMQ Out Adapter: wsmq_send_message(): About to run MQPut
Description	WSMQ Out Adapter: wsmq_send_message(): About to run MQPut

Code	300506
Severity	Error
Message	Connection broken. Trying to connect again.
Description	Connection broken. Trying to connect again.

Code	300507
Severity	Error
Message	WSMQ Out Adapter: MQPUT unable to put data. Connection to Websphere MQ broken and unable to reconnect.
Description	WSMQ Out Adapter: MQPUT unable to put data. Connection to Websphere MQ broken and unable to reconnect.

Code	300508
Severity	Error
Message	WSMQ Out Adapter: MQPUT unable to put data. Reason: {0}
Description	WSMQ Out Adapter: MQPUT unable to put data. Reason: {0}

Code	300509
Severity	Error
Message	WSMQ Out Adapter: MQPUT unable to put data. Shutting down adapter.
Description	WSMQ Out Adapter: MQPUT unable to put data. Shutting down adapter.

Code	300510
Severity	Error
Message	WSMQ Out Adapter: MQCLOSE ended with reason code {0}
Description	WSMQ Out Adapter: MQCLOSE ended with reason code {0}

Code	300511
Severity	Error
Message	WebSphere MQ Output Adapter: No Channel entered for MQ Server.
Description	WebSphere MQ Output Adapter: No Channel entered for MQ Server.

Code	300512
Severity	Error
Message	WebSphere MQ Output Adapter: No QueueName entered for MQ Server.
Description	WebSphere MQ Output Adapter: No QueueName entered for MQ Server.

Code	300513
Severity	Error
Message	WebSphere MQ Output Adapter: No QueueManagerName entered for MQ Server.
Description	WebSphere MQ Output Adapter: No QueueManagerName entered for MQ Server.

Code	300514
Severity	Error
Message	WebSphere MQ Output Adapter: No SystemName entered for MQ Server.
Description	WebSphere MQ Output Adapter: No SystemName entered for MQ Server.

Code	300515
Severity	Error
Message	WebSphere MQ Output Adapter: No Port entered for MQ Server
Description	WebSphere MQ Output Adapter: No Port entered for MQ Server

Code	300516
Severity	Error
Message	WebSphere MQ Output Adapter: No gdKeyColumnName entered for Adapter.
Description	WebSphere MQ Output Adapter: No gdKeyColumnName entered for Adapter.

Code	300517
Severity	Error
Message	WebSphere MQ Output Adapter: No opcodeColumnName entered for Adapter.
Description	WebSphere MQ Output Adapter: No opcodeColumnName entered for Adapter.

Code	300518
Severity	Error
Message	WebSphere MQ Output Adapter: No truncate stream name entered for Adapter.
Description	WebSphere MQ Output Adapter: No truncate stream name entered for Adapter.

Code	300519
Severity	Error
Message	WebSphere MQ Output Adapter: No purge interval entered for Adapter.
Description	WebSphere MQ Output Adapter: No purge interval entered for Adapter.

Code	300520
Severity	Error
Message	WebSphere MQ Output Adapter: No batch size entered for Adapter.
Description	WebSphere MQ Output Adapter: No batch size entered for Adapter.

Code	300521
Severity	Error
Message	WebSphere MQ Output Adapter: Unable to Open Websphere MQ Channel.
Description	WebSphere MQ Output Adapter: Unable to Open Websphere MQ Channel.

Code	300522
Severity	Debug
Message	WSMQ Out Adapter: OpenMQChannel()
Description	WSMQ Out Adapter: OpenMQChannel()

Code	300523
Severity	Debug
Message	WSMQ Out Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3}
Description	WSMQ Out Adapter: making MQCONNX call with m_conn.QMName={0} Hcon={1} CompCode={2} CReason={3}

Code	300524
Severity	Error
Message	WSMQ Out Adapter: MQCONNX ended with reason code {0}
Description	WSMQ Out Adapter: MQCONNX ended with reason code {0}

Code	300525
Severity	Error
Message	WSMQ Out Adapter: MQCONNX failed with reason code {0}
Description	WSMQ Out Adapter: MQCONNX failed with reason code {0}

Code	300526
Severity	Error
Message	WSMQ Out Adapter: MQOPEN unable to open queue for output. Reason: {0}
Description	WSMQ Out Adapter: MQOPEN unable to open queue for output. Reason: {0}

Code	300527
Severity	Error
Message	"WSMQ Out Adapter: MQOPEN unable to open queue for output.
Description	"WSMQ Out Adapter: MQOPEN unable to open queue for output.

Code	300528
Severity	Error
Message	Control Stream update failed
Description	Control Stream update failed

Code	300529
Severity	Debug
Message	DBOutput_Adapter::KDB Data Type not supported for JDBC
Description	DBOutput_Adapter::KDB JDBC does not support ESP Money(all), bigdatetime or Binary

Code	300530
Severity	Debug
Message	DBOutput_Adapter::KDB Does not support NULL for boolean
Description	DBOutput_Adapter::JDBC does not support NULL boolean values

Code	300531
Severity	Debug
Message	DDBOutput_Adapter::rollbackTransaction() Entered
Description	DBOutput_Adapter::rollbackTransaction() Entered

Code	300532
Severity	Debug
Message	DBOutput_Adapter::rollbackTransaction() Exited
Description	DBOutput_Adapter::rollbackTransaction() Exited

Code	300533
Severity	Debug
Message	DBOutput_Adapter::rollbackTransaction() failed with reason code
Description	DBOutput_Adapter::rollbackTransaction() failed with reason code

Code	300534
Severity	Debug
Message	WSMQInAdapter::commitTransaction().
Description	WSMQInAdapter::commitTransaction().

Code	300535
Severity	Debug
Message	WSMQInAdapter::commitTransaction() sync point commit.
Description	WSMQInAdapter::commitTransaction() sync point commit.

Code	300536
Severity	Error
Message	JMS Input Adapter: Durable Subscription Mode has been specified for Queue.
Description	JMS Input Adapter: Durable Subscription Mode is not supported for Queue, its supported only for Topic.

Code	300537
Severity	Error
Message	JMS Input Adapter: Client ID required for Durable Topic Subcription has not been specified.
Description	JMS Input Adapter: Client ID required for Durable Topic Subcription has not been specified.

Code	300538
Severity	Error
Message	JMS Input Adapter: Subscription Name required for Durable Topic Subcription has not been specified.
Description	JMS Input Adapter: Subscription Name required for Durable Topic Subcription has not been specified.

Code	300539
Severity	Debug
Message	JmsInAdapter::commitTransaction().
Description	JmsInAdapter::commitTransaction().

Code	300540
Severity	Debug
Message	JmsInAdapter::commitTransaction() durable susbcription mode commit.
Description	JmsInAdapter::commitTransaction() durable susbcription mode commit.

Code	300541
Severity	Debug
Message	DBInput_Adapter::reset() Exited.
Description	DBInput_Adapter::reset() Exited.

Code	300542
Severity	Notice
Message	TextIn_Adapter: File {0} processed on {1}.
Description	TextIn_Adapter: File {0} processed on {1}.

Code	300543
Severity	Error
Message	TextIn_Adapter: Error while deleting file {0}.
Description	TextIn_Adapter: Error while deleting file {0}.

Code	300544
Severity	Error
Message	TextIn_Adapter: Conflicting parameters removeAfterProcess & reprocess. Both cannot be set to true.
Description	TextIn_Adapter: Conflicting parameters removeAfterProcess & reprocess. Both cannot be set to true.

Code	300545
Severity	Error
Message	DBInput_Adapter::'table' name is invalid.
Description	DBInput_Adapter::'table' name is invalid.

Code	300546
Severity	Error
Message	DBOutput_Adapter 'table' name is invalid
Description	DBOutput_Adapter 'table' name is invalid

Code	300600
Severity	Error
Message	Cannot establish a connection to the IQ Database.
Description	Cannot establish a connection to the IQ Database.

Code	300601
Severity	Error
Message	Cannot establish a connection to the IQ Database.
Description	Cannot establish a connection to the IQ Database.

Code	300602
Severity	Error
Message	Cannot establish a connection to the IQ Database.
Description	Cannot establish a connection to the IQ Database.

Code	300603
Severity	Error
Message	Could not retrieve metadata for the work file table from the odbc driver.
Description	Could not retrieve metadata for the work file table from the odbc driver.

Code	300604
Severity	Warning
Message	Could not close the connection to the IQ database.
Description	Could not close the connection to the IQ database.

Code	300605
Severity	Warning
Message	Unable to remove the information for {0} from the work file table.
Description	Unable to remove the information for {0} from the work file table.

Code	300606
Severity	Error
Message	The service name in the adapter properties is not configured as an ODBC service. The IQ Output Adapter requires an ODBC connection to function.
Description	The service name in the adapter properties is not configured as an ODBC service. The IQ Output Adapter requires an ODBC connection to function.

Code	300607
Severity	Error
Message	Could not add the information for {0} to the work file table.
Description	Could not add the information for {0} to the work file table.

Code	300608
Severity	Error
Message	Could not update the entry in the work file table for {0}.
Description	Could not update the entry in the work file table for {0}.

Code	300609
Severity	Error
Message	Could not update the entry in the work file table for {0}.
Description	Could not update the entry in the work file table for {0}.

Code	300610
Severity	Error
Message	Could not update the entry in the work file table for {0}.
Description	Could not update the entry in the work file table for {0}.

Code	300611
Severity	Error
Message	A persistence file cannot be found nor created in either the primary or secondary locations. Please ensure that there is enough space available and that ESP has permission to write to these directories.
Description	A persistence file cannot be found nor created in either the primary or secondary locations. Please ensure that there is enough space available and that ESP has permission to write to these directories.

Code	300613
Severity	Error
Message	A record in the persistence file cannot be read properly. Please contact Sybase Support.
Description	A record in the persistence file cannot be read properly. Please contact Sybase Support.

Code	300614
Severity	Error
Message	A persistence file cannot be created in either the primary or secondary locations.
Description	A persistence file cannot be created in either the primary or secondary locations.

Code	300615
Severity	Error
Message	An attempt to write to the persistence file has failed.
Description	An attempt to write to the persistence file has failed.

Code	300616
Severity	Error
Message	The data type of the column named {0} is not supported.
Description	The data type of the column named {0} is not supported.

Code	300617
Severity	Error
Message	The adapter was unable to allocate enough memory to process an incomming row. The row will be discarded.
Description	The adapter was unable to allocate enough memory to process an incomming row. The row will be discarded.

Code	300618
Severity	Error
Message	The value destined for the database table column named {0} was NULL. This database column does not allow NULL values, so the current ESP row has been discarded. If the input data cannot be changed, this column should be made nullable in the database, or a default value should be provided for the column.
Description	The value destined for the database table column named {0} was NULL. This database column does not allow NULL values, so the current ESP row has been discarded. If the input data cannot be changed, this column should be made nullable in the database, or a default value should be provided for the column.

Code	300619
Severity	Error
Message	An integer value in an ESP row destined for a tiny integer column in the database was negative. Tiny integers are unsigned values, and can not be negative. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for a tiny integer column in the database was negative. Tiny integers are unsigned values, and can not be negative. The row containing the integer has been discarded.

Code	300620
Severity	Error
Message	An integer value in an ESP row destined for a tiny integer column in the database was too large to be represented by a tiny integer. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for a tiny integer column in the database was too large to be represented by a tiny integer. The row containing the integer has been discarded.

Code	300621
Severity	Error
Message	An integer value in an ESP row destined for a small integer column in the database was too small to be represented by a small integer. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for a small integer column in the database was too small to be represented by a small integer. The row containing the integer has been discarded.

Code	300622
Severity	Error
Message	An integer value in an ESP row destined for a small integer column in the database was too large to be represented by a small integer. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for a small integer column in the database was too large to be represented by a small integer. The row containing the integer has been discarded.

Code	300623
Severity	Error
Message	An integer value in an ESP row destined for an unsigned small integer column in the database was negative. Unsigned small integers can not be negative. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for an unsigned small integer column in the database was negative. Unsigned small integers can not be negative. The row containing the integer has been discarded.

Code	300624
Severity	Error
Message	An integer value in an ESP row destined for an unsigned small integer column in the database was too large to be represented by an unsigned small integer. The row containing the integer has been discarded.
Description	An integer value in an ESP row destined for an unsigned small integer column in the database was too large to be represented by an unsigned small integer. The row containing the integer has been discarded.

Code	300625
Severity	Error
Message	A long value in an ESP row destined for an unsigned integer column in the database was negative. Unsigned integers can not be negative. The row containing the long has been discarded.
Description	A long value in an ESP row destined for an unsigned integer column in the database was negative. Unsigned integers can not be negative. The row containing the long has been discarded.

Code	300626
Severity	Error
Message	A long value in an ESP row destined for an unsigned integer column in the database was too large to be represented by an unsigned integer. The row containing the long has been discarded.
Description	A long value in an ESP row destined for an unsigned integer column in the database was too large to be represented by an unsigned integer. The row containing the long has been discarded.

Code	300627
Severity	Error
Message	A long value in an ESP row destined for an unsigned big integer column in the database was negative. Unsigned big integers can not be negative. The row containing the long has been discarded.
Description	A long value in an ESP row destined for an unsigned big integer column in the database was negative. Unsigned big integers can not be negative. The row containing the long has been discarded.

Code	300628
Severity	Error
Message	A money value in an ESP row destined for a small money column in the database was too small to be represented by a small money. The row containing the money value has been discarded.
Description	A money value in an ESP row destined for a small money column in the database was too small to be represented by a small money. The row containing the money value has been discarded.

Code	300629
Severity	Error
Message	A money value in an ESP row destined for a small money column in the database was too large to be represented by a small money. The row containing the money value has been discarded.
Description	A money value in an ESP row destined for a small money column in the database was too large to be represented by a small money. The row containing the money value has been discarded.

Code	300630
Severity	Error
Message	A binary value in an ESP row was too large to fit in the destination database column. The row has been discarded.
Description	A binary value in an ESP row was too large to fit in the destination database column. The row has been discarded.

Code	300631
Severity	Error
Message	Internal error: Mapping from ESP type {0} to database type {1} is not recognized. Please contact Sybase support and provide this error message.
Description	Internal error: Mapping from ESP type {0} to database type {1} is not recognized. Please contact Sybase support and provide this error message.

Code	300632
Severity	Debug
Message	# This file is not to be modified manually. It is used to store information for the IQ Output Adapter and is updated programatically.
Description	# This file is not to be modified manually. It is used to store information for the IQ Output Adapter and is updated programatically.

Code	300634
Severity	Error
Message	Internal error: An IO buffer could not be enqueued on the writer queue. This may be caused by a lack of memory available on the server.
Description	Internal error: An IO buffer could not be enqueued on the writer queue. This may be caused by a lack of memory available on the server.

Code	300635
Severity	Warning
Message	The data file located at {0}/{1} is no longer needed, could not be deleted. Please remove it manually.
Description	The data file located at {0}/{1} is no longer needed, could not be deleted. Please remove it manually.

Code	300636
Severity	Error
Message	The file located at {0}/{1} may not have been marked ready for loading into the IQ database and may need to be manually loaded using a LOAD TABLE command.
Description	The file located at {0}/{1} may not have been marked ready for loading into the IQ database and may need to be manually loaded using a LOAD TABLE command.

Code	300637
Severity	Error
Message	Writing to the data file {0}/{1} failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space exists on the disc.
Description	Writing to the data file {0}/{1} failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space exists on the disc.

Code	300638
Severity	Error
Message	Flushing and closing the data file {0}/{1} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories.
Description	Flushing and closing the data file {0}/{1} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories.

Code	300639
Severity	Error
Message	The creation of the data file {0} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories.
Description	The creation of the data file {0} has failed. Please ensure that ESP has write permissions to the primary and secondary directories and that enough space is available in those directories.

Code	300640
Severity	Error
Message	Writing information for the data file {0}/{1} to the persistence file or work file table has failed. Please see the preceeding messages for details.
Description	Writing information for the data file {0}/{1} to the persistence file or work file table has failed. Please see the preceeding messages for details.

Code	300641
Severity	Warning
Message	The primary directory does not have enough space for the target file size. If this problem continues, please increase the space available.
Description	The primary directory does not have enough space for the target file size. If this problem continues, please increase the space available.

Code	300642
Severity	Warning
Message	The secondary directory does not have enough space for the target file size. Please free up space in this directory.
Description	The secondary directory does not have enough space for the target file size. Please free up space in this directory.

Code	300643
Severity	Error
Message	There is not enough space available in either the primary or secondary directory to create a data file. Please allocate more resources to these directories.
Description	There is not enough space available in either the primary or secondary directory to create a data file. Please allocate more resources to these directories.

Code	300644
Severity	Error
Message	An attempt to re-write to a data file has failed. Please ensure that there is enough space in the primary and secondary directories for the data files and that ESP has write permission to these directories.
Description	An attempt to re-write to a data file has failed. Please ensure that there is enough space in the primary and secondary directories for the data files and that ESP has write permission to these directories.

Code	300646
Severity	Error
Message	The primary data directory does not exist. Please check the path and make sure that ESP has access to this directory.
Description	The primary data directory does not exist. Please check the path and make sure that ESP has access to this directory.

Code	300647
Severity	Error
Message	The secondary data directory does not exist. Please check the path and make sure that ESP has access to this directory.
Description	The secondary data directory does not exist. Please check the path and make sure that ESP has access to this directory.

Code	300648
Severity	Error
Message	The configuration values given to the IQ Output Adapter are invalid. Please see the preceeding messages for more details.
Description	The configuration values given to the IQ Output Adapter are invalid. Please see the preceeding messages for more details.

Code	300649
Severity	Error
Message	The IQ Output Adapter cannot open the data file at {0}/{1}. Please ensure that this file exists and that ESP has permission to access it.
Description	The IQ Output Adapter cannot open the data file at {0}/{1}. Please ensure that this file exists and that ESP has permission to access it.

Code	300652
Severity	Error
Message	The IO buffer size for this adapter has been set too low to handle the size of the update and delete transactions being processed by the adapter. Please increase the IO buffer size to accomodate deletes and updates on larger data sets.
Description	The IO buffer size for this adapter has been set too low to handle the size of the update and delete transactions being processed by the adapter. Please increase the IO buffer size to accomodate deletes and updates on larger data sets.

Code	300653
Severity	Error
Message	An internal error has occured that has caused the loss of an IO buffer. The adapter will continue to run but in a diminished capacity and may no longer be able to process messages. Please check the available system memory and restart the ESP server to restore the correct number of IO buffers.
Description	An internal error has occured that has caused the loss of an IO buffer. The adapter will continue to run but in a diminished capacity and may no longer be able to process messages. Please check the available system memory and restart the ESP server to restore the correct number of IO buffers.

Code	300654
Severity	Warning
Message	A string value destined for the database column {0} has a length of {1}, but the database column can support a length of at most {2}. The data will be truncated to fit in the column.
Description	A string value destined for the database column {0} has a length of {1}, but the database column can support a length of at most {2}. The data will be truncated to fit in the column.

Code	300655
Severity	Error
Message	A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number.
Description	A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number.

Code	300656
Severity	Error
Message	The IQ Output Adapter could not load the SQL data file {0}/{1}.
Description	The IQ Output Adapter could not load the SQL data file {0}/{1}.

Code	300657
Severity	Error
Message	The target table name contains double quotes, which are not allowed in IQ table names.
Description	The target table name contains double quotes, which are not allowed in IQ table names.

Code	300658
Severity	Error
Message	An attempt to use quoted identifiers within IQ has failed. The IQ Output Adapter requires this ability.
Description	An attempt to use quoted identifiers within IQ has failed. The IQ Output Adapter requires this ability.

Code	300659
Severity	Error
Message	A money value in an ESP row destined for a decimal/numeric column in the database was too large to be represented given the column's precision. The row containing the money value has been discarded.
Description	A money value in an ESP row destined for a decimal/numeric column in the database was too large to be represented given the column's precision. The row containing the money value has been discarded.

Code	300660
Severity	Warning
Message	The primary and overflow locations are identical. The failover mechanism will not function correctly.
Description	The primary and overflow locations are identical. The failover mechanism will not function correctly.

Code	300661
Severity	Warning
Message	The overflow directory has not been specified. The failover mechanism will not function unless one is provided.
Description	The overflow directory has not been specified. The failover mechanism will not function unless one is provided.

Code	300662
Severity	Warning
Message	The target file size is not a multiple of the IO buffer size. This may produce smaller files than the requested file size.
Description	The target file size is not a multiple of the IO buffer size. This may produce smaller files than the requested file size.

Code	300663
Severity	Error
Message	The target file size is either equal to, or less than, the target IO buffer size. The file size must be larger than the IO buffer size.
Description	The target file size is either equal to, or less than, the target IO buffer size. The file size must be larger than the IO buffer size.

Code	300664
Severity	Error
Message	The IQ Output Adapter could not load the binary data file {0}/{1}.
Description	The IQ Output Adapter could not load the binary data file {0}/{1}.

Code	300665
Severity	Error
Message	The IQ Output Adapter could not complete the data recovery process. Please ensure that the IQ Output Adapter has read and write permissions in both the primary and secondary directories and that no data files have been deleted since shutdown.
Description	The IQ Output Adapter could not complete the recovery process. Please ensure that the IQ Output Adapter has read and write permissions in both the primary and secondary directories and that no data files have been deleted since shutdown.

Code	300666
Severity	Warning
Message	The IQ Output Adapter could not determine the host and port info for the IQ database to which it is connected. The adapter will continue to run but some information may not be available in the Sybase Control Central plugin.
Description	The IQ Output Adapter could not determine the host and port info for the IQ database to which it is connected. The adapter will continue to run but some information may not be available in the Sybase Control Central plugin.

Code	300667
Severity	Warning
Message	A previous instance of the IQ Output adapter was abnormally terminated in the process of writing the data file "{0}" to disk. The adapter will not attempt to recover this file, as it may not be complete. The file should be removed manually.
Description	A previous instance of the IQ Output adapter was abnormally terminated in the process of writing the data file "{0}" to disk. The adapter will not attempt to recover this file, as it may not be complete. The file should be removed manually.

Code	300700
Severity	Error
Message	The opcode is invalid.
Description	The opcode is invalid.

Code	300701
Severity	Error
Message	The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly.
Description	The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly.

Code	300702
Severity	Error
Message	Some of the adapter properties provided are invalid.
Description	Some of the adapter properties provided are invalid.

Code	300703
Severity	Error
Message	Unable to get connection to the database.
Description	Unable to get connection to the database.

Code	300704
Severity	Error
Message	Adapter failed to start because initialization failed.
Description	Adapter failed to start because initialization failed.

Code	300705
Severity	Error
Message	Adapter failed to start because validation of target DB table failed.
Description	Adapter failed to start because validation of target DB table failed.

Code	300706
Severity	Error
Message	Invalid table name was provided for discovery.
Description	Invalid table name was provided for discovery.

Code	300707
Severity	Error
Message	Discovery failed to get number of table columns.
Description	Discovery failed to get number of table columns.

Code	300709
Severity	Error
Message	Service property is mandatory and cannot be empty.
Description	Service property is mandatory and cannot be empty.

Code	300710
Severity	Error
Message	Table property is required when the adapter is not in discovery mode.
Description	Table property is required when the adapter is not in discovery mode.

Code	300711
Severity	Error
Message	The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly.
Description	The dataWarehouseMode property is invalid. It can only be OFF, ON or InsertOnly.

Code	300712
Severity	Error
Message	Values of onlyBase and outputBase properties are conflicting.
Description	Values of onlyBase and outputBase properties are conflicting.

Code	300713
Severity	Error
Message	The permutation property is invalid. {0}
Description	The permutation property is invalid. {0}

Code	300714
Severity	Error
Message	Unable to get the number of columns for target DB table "{0}".
Description	Unable to get the number of columns for target DB table "{0}".

Code	300715
Severity	Error
Message	When permutation property is not specified then columns in the source stream and target DB table must match. Expected column count for target DB table "{0}" is {1} while the actual column count is {2}.
Description	When permutation property is not specified then columns in the source stream and target DB table must match. Expected column count for target DB table "{0}" is {1} while the actual column count is {2}.

Code	300716
Severity	Error
Message	Unable to get column metadata for target DB table "{0}".
Description	Unable to get column metadata for target DB table "{0}".

Code	300717
Severity	Error
Message	There is no column in the target DB table that matched the name "{0}" specified in the timestampColumnName property.
Description	There is no column in the target DB table that matched the name "{0}" specified in the timestampColumnName property.

Code	300718
Severity	Error
Message	Source stream column "{0}" should not be mapped to the timestamp column "{1}".
Description	Source stream column "{0}" should not be mapped to the timestamp column "{1}".

Code	300719
Severity	Warning
Message	Permutation property has no mapping for column "{0}" that is part of the primary key of the source window. This may result in undesired behaviour for updates and deletes.
Description	Permutation property has no mapping for column "{0}" that is part of the primary key of the source window. Updates and deletes could either affect rows you didn't mean to affect, or work flawlessly.

Code	300720
Severity	Error
Message	The DB column specified in the adapter property "timestampColumnName" needs to have a bigdatetime type.
Description	The DB column specified in the adapter property "timestampColumnName" needs to have a bigdatetime type.

Code	300721
Severity	Error
Message	Unsupported data type for source stream column "{0}".
Description	Unsupported data type for source stream column "{0}".

Code	300722
Severity	Error
Message	Unsupported data type for column "{0}" of target DB table "{1}".
Description	Unsupported data type for column "{0}" of target DB table "{1}".

Code	300723
Severity	Error
Message	The type of target DB column "{0}" is not supported for corresponding source stream column "{1}".
Description	The type of target DB column "{0}" is not supported for corresponding source stream column "{1}".

Code	300724
Severity	Error
Message	Only numeric precision up to 38 is supported in column "{0}" of the target DB table.
Description	Only numeric precision up to 38 is supported in column "{0}" of the target DB table.

Code	300725
Severity	Error
Message	ESP Boolean values can go only into DB string columns of 5 characters long. Check DB table column "{0}".
Description	ESP Boolean values can go only into DB string columns of 5 characters long. Check DB table column "{0}".

Code	300726
Severity	Error
Message	Column "{0}" of the target DB table "{1}" needs to be mapped to a column of the source stream because it has no default value and it not nullable.
Description	Column "{0}" of the target DB table "{1}" needs to be mapped to a column of the source stream because it has no default value and it not nullable.

Code	300727
Severity	Error
Message	Discovering tables failed.
Description	Discovering tables failed.

Code	300728
Severity	Error
Message	DBAccess layer not available.
Description	DBAccess layer not available.

Code	300729
Severity	Error
Message	Unable to establish a DB connection for {0} service.
Description	Unable to establish a DB connection for {0} service.

Code	300730
Severity	Error
Message	When permutation property is not specified then columns in the source stream and target DB table must match. Stream column name is "{0}" while corresponding DB column name is "{1}".
Description	When permutation property is not specified then columns in the source stream and target DB table must match. Stream column name is "{0}" while corresponding DB column name is "{1}".

Code	300731
Severity	Error
Message	The database column {0} is mapped to an ESP money column that requires a scale of at least {2}, but {0} has a scale of {1}.
Description	The database column {0} is mapped to an ESP money column that requires a scale of at least {2}, but {0} has a scale of {1}.

Code	300732
Severity	Error
Message	The database column {0} has a scale that is larger than its precision. The scale must be less than or equal to the precision.
Description	The database column {0} has a scale that is larger than its precision. The scale must be less than or equal to the precision.

Code	300733
Severity	Error
Message	The database column {0} has a negative scale. The scale must be equal to or greater than zero.
Description	The database column {0} has a negative scale. The scale must be equal to or greater than zero.

Code	300734
Severity	Error
Message	The database column {0} is mapped to an Integer column, but its whole-number precision (precision minus scale) is less than ten. Only numeric columns with whole-number precision equal to or greater than ten may be mapped to Integer columns in ESP.
Description	The database column {0} is mapped to an Integer column, but its whole-number precision (precision minus scale) is less than ten. Only numeric columns with whole-number precision equal to or greater than ten may be mapped to Integer columns in ESP.

Code	300735
Severity	Error
Message	The database column {0} is mapped to a Long column, but its whole-number precision (precision minus scale) is less than nineteen. Only numeric columns with whole-number precision equal to or greater than nineteen may be mapped to Long columns in ESP.
Description	The database column {0} is mapped to a Long column, but its whole-number precision (precision minus scale) is less than nineteen. Only numeric columns with whole-number precision equal to or greater than nineteen may be mapped to Long columns in ESP.

Code	300736
Severity	Error
Message	The database column {0} is mapped to a boolean column in ESP, but its length is not five. Booleans may only be mapped to character columns with a length of five.
Description	The database column {0} is mapped to a boolean column in ESP, but its length is not five. Booleans may only be mapped to character columns with a length of five.

Code	300737
Severity	Error
Message	A float value in an ESP row destined for a real column in the database was too large to be represented by a real. The row containing the float value has been discarded.
Description	A float value in an ESP row destined for a real column in the database was too large to be represented by a real. The row containing the float value has been discarded.

Code	300738
Severity	Error
Message	Adapter cannot start since updates and deletes will fail to execute because the permutation property has no mapping for any of the columns that are part of the primary key of the source window.
Description	Adapter cannot start since updates and deletes will fail to execute because the permutation property has no mapping for any of the columns that are part of the primary key of the source window.

Code	300800
Severity	Error
Message	The driver library for DB service {0} is expected to be {1}.
Description	The driver library for DB service {0} is expected to be {1}.

Code	300801
Severity	Error
Message	An error occurred when getting a list of columns that have default values set in DB.
Description	An error occurred when getting a list of columns that have default values set in DB.

Code	300802
Severity	Error
Message	Invalid value of bulkBatchSize property. It must be a positive number.
Description	Invalid value of bulkBatchSize property. It must be a positive number.

Code	300803
Severity	Error
Message	Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize.
Description	Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize.

Code	300804
Severity	Error
Message	Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer.
Description	Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer.

Code	300805
Severity	Error
Message	Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive.
Description	Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive.

Code	300806
Severity	Error
Message	Sybase ASE Output adapter cannot start because initialization of the Loader component has failed.
Description	Sybase ASE Output adapter cannot start because initialization of the Loader component has failed.

Code	300807
Severity	Error
Message	Sybase ASE Output adapter failed to execute an update or a delete SQL statement.
Description	Sybase ASE Output adapter failed to execute an update or a delete SQL statement.

Code	300808
Severity	Error
Message	Sybase ASE Output adapter failed to get partition information for target database table "{0}".
Description	Sybase ASE Output adapter failed to get partition information for target database table "{0}".

Code	300809
Severity	Error
Message	Sybase ASE Output adapter cannot start because initialization of a ChildLoader component has failed.
Description	Sybase ASE Output adapter cannot start because initialization of a ChildLoader component has failed.

Code	300810
Severity	Error
Message	Sybase ASE Output adapter was unable to prepare for bulk loading into partition "{0}" of target database table "{1}".
Description	Sybase ASE Output adapter was unable to prepare for bulk loading into partition "{0}" of target database table "{1}".

Code	300811
Severity	Error
Message	Sybase ASE Output adapter failed to transfer {0} rows for bulk loading into the database.
Description	Sybase ASE Output adapter failed to transfer {0} rows for bulk loading into the database.

Code	300812
Severity	Error
Message	Sybase ASE Output adapter failed to bulk load {0} rows into the database.
Description	Sybase ASE Output adapter failed to bulk load {0} rows into the database.

Code	300813
Severity	Warning
Message	Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated.
Description	Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated.

Code	300814
Severity	Error
Message	Invalid ESP data type of output value for column "{0}" of the database table "{1}".
Description	Invalid ESP data type of output value for column "{0}" of the database table "{1}".

Code	300815
Severity	Info
Message	Initialization of Sybase ASE Output adapter loader was successful. Created {0} child loaders.
Description	Initialization of Sybase ASE Output adapter loader was successful. Created {0} child loaders.

Code	300816
Severity	Info
Message	Sybase ASE Output adapter is ready to bulk load partition "{0}" of target database table "{1}".
Description	Sybase ASE Output adapter is ready to bulk load partition "{0}" of target database table "{1}".

Code	300817
Severity	Info
Message	Initializing Sybase ASE Output adapter loader using service "{0}" and target database table "{1}".
Description	Initializing Sybase ASE Output adapter loader using service "{0}" and target database table "{1}".

Code	300818
Severity	Info
Message	Sybase ASE Output adapter initialized successfully using following adapter properties: {0}
Description	Sybase ASE Output adapter initialized successfully using following adapter properties: {0}

Code	300819
Severity	Info
Message	Sybase ASE Output adapter is ready to start processing incoming data.
Description	Sybase ASE Output adapter is ready to start processing incoming data.

Code	300820
Severity	Info
Message	Target database table "{0}" has {1} partition(s) of type "{2}".
Description	Target database table "{0}" has {1} partition(s) of type "{2}".

Code	300821
Severity	Error
Message	Sybase ASE Output adapter discarded a row because conversion failed from ESP to ASE data type for column "{0}" of the database table "{1}".
Description	Sybase ASE Output adapter discarded a row because conversion failed from ESP to ASE data type for column "{0}" of the database table "{1}".

Code	300900
Severity	Error
Message	ODBC status: {0} SQL error code: {1} Error Message: "{2}".
Description	ODBC status: {0} SQL error code: {1} Error Message: "{2}".

Code	300901
Severity	Error
Message	The ODBC driver manager was given an invalid handle by the HANA output adapter.
Description	The ODBC driver manager was given an invalid handle by the HANA output adapter.

Code	300902
Severity	Error
Message	HANA Output adapter failed to obtain metadata from the database for column validation.
Description	HANA Output adapter failed to obtain metadata from the database for column validation.

Code	300903
Severity	Error
Message	SAP HANA Output adapter failed to prepare for bulk loading of target database table "{0}".
Description	SAP HANA Output adapter failed to prepare for bulk loading of target database table "{0}".

Code	300904
Severity	Error
Message	SAP HANA Output adapter failed to prepare column {0} for bulk loading of target database table "{1}".
Description	SAP HANA Output adapter failed to prepare column {0} for bulk loading of target database table "{1}".

Code	300905
Severity	Error
Message	SAP HANA Output adapter failed to transfer {0} out of {1} rows to target database table "{2}".
Description	SAP HANA Output adapter failed to transfer {0} out of {1} rows to target database table "{2}".

Code	300906
Severity	Info
Message	SAP HANA Output adapter is ready to bulk load ChildLoader "{0}" of target database table "{1}".
Description	SAP HANA Output adapter is ready to bulk load ChildLoader "{0}" of target database table "{1}".

Code	300907
Severity	Error
Message	SAP HANA Output adapter cannot start because initialization of a ChildLoader component has failed.
Description	SAP HANA Output adapter cannot start because initialization of a ChildLoader component has failed.

Code	300908
Severity	Warning
Message	Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated.
Description	Output value for column "{0}" of the database table "{1}" has length {2} which is longer than the maximum length {3} supported by the database schema. The data will be truncated.

Code	300909
Severity	Error
Message	Invalid ESP data type of output value for column "{0}" of the database table "{1}".
Description	Invalid ESP data type of output value for column "{0}" of the database table "{1}".

Code	300910
Severity	Error
Message	A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number.
Description	A double mapped to the database column {0} could not be stored, because the column precision of {1} was insufficient to represent the number.

Code	300911
Severity	Error
Message	HANA Output Adapter thread count of {0} does not meet recommended minumum of {1}, which is the number of partitions in the table. This may negatively impact performance.
Description	HANA Output Adapter thread count of {0} does not meet recommended minimum of {1}, which is the number of partitions in the table. This may negatively impact performance.

Code	300912
Severity	Info
Message	Initializing SAP HANA Output adapter loader using service "{0}" and target database table "{1}".
Description	Initializing SAP HANA Output adapter loader using service "{0}" and target database table "{1}".

Code	300913
Severity	Error
Message	SAP HANA Output adapter cannot start because initialization of the Loader component has failed.
Description	SAP HANA Output adapter cannot start because initialization of the Loader component has failed.

Code	300914
Severity	Info
Message	Target database table "{0}" has {1} partition(s).
Description	Target database table "{0}" has {1} partition(s).

Code	300915
Severity	Info
Message	Initialization of SAP HANA Output adapter loader was successful. Created {0} child loaders.
Description	Initialization of SAP HANA Output adapter loader was successful. Created {0} child loaders.

Code	300916
Severity	Error
Message	SAP HANA Output adapter failed to execute an update or a delete SQL statement.
Description	SAP HANA Output adapter failed to execute an update or a delete SQL statement.

Code	300917
Severity	Error
Message	HANA Output Adapter thread count of {0} exceeds recommended maximum of {1}, which is 5 times the number of partitions in the table. This may negatively impact performance.
Description	HANA Output Adapter thread count of {0} exceeds recommended maximum of {1}, which is 5 times the number of partitions in the table. This may negatively impact performance.

Code	300918
Severity	Info
Message	SAP HANA Output adapter initialized successfully using following adapter properties: {0}
Description	SAP HANA Output adapter initialized successfully using following adapter properties: {0}

Code	300919
Severity	Info
Message	SAP HANA Output adapter is ready to start processing incoming data.
Description	SAP HANA Output adapter is ready to start processing incoming data.

Code	300920
Severity	Error
Message	Invalid value of threadCount property. It must be a non-negative integer.
Description	Invalid value of threadCount property. It must be a non-negative integer.

Code	300921
Severity	Error
Message	The service name in the adapter properties is not configured as an ODBC service. The SAP HANA Output Adapter requires an ODBC connection to function.
Description	The service name in the adapter properties is not configured as an ODBC service. The SAP HANA Output Adapter requires an ODBC connection to function.

Code	300922
Severity	Warning
Message	SAP HANA Output Adapter could not determine the host and port info for the HANA database to which it is connected. The adapter will continue to run but some information may not be available in the Sybase Control Central plugin.
Description	SAP HANA Output Adapter could not determine the host and port info for the HANA database to which it is connected. The adapter will continue to run but some information may not be available in the Sybase Control Central plugin.

Code	300923
Severity	Error
Message	Invalid value of bulkBatchSize property. It must be a positive number.
Description	Invalid value of bulkBatchSize property. It must be a positive number.

Code	300924
Severity	Error
Message	Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize.
Description	Invalid value of bulkInsertArraySize property. It must be a positive integer, less than or equal to bulkBatchSize, and a divisor of bulkBatchSize.

Code	300925
Severity	Error
Message	Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer.
Description	Invalid value of idleBufferWriteDelayMSec property. It must be a positive integer.

Code	300926
Severity	Error
Message	Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive.
Description	Invalid value of bufferAgeLimitMSec property. It must be between 1 and 65535 inclusive.

Created November 27, 2012. Send feedback on this help topic to Sybase Technical Publications: pubs@sybase.com