Configuring BlackBerry Push Settings

Create a new BlackBerry Push Service configuration that specifies the delivery method for the service users.

BlackBerry push notifications alert offline users to the availability of new items awaiting retrieval on Unwired Server. Push uses an IP connection only long enough for the Send/Receive data exchange to complete. BlackBerry Push notifications overcome issues with always-on connectivity and battery life consumption over wireless networks.

  1. In the left navigation pane, expand the Servers folder and select a server.
  2. Select Server Configuration.
  3. In the Messaging tab, select BlackBerry Push Configuration.
  4. (Optional) Configure the BES response portioning value to fine tune the amount of HTTP traffic the BES MDS server will accept from Unwired Server, in MB, KB and bytes.
    By default, this setting is configured to 100 KB in Unwired Server, to accommodate older BES servers. Newer BES servers are configured with a 1MB default. If you have a newer BES server, you can improve performance by setting a higher value. You may need to experiment to fine tune the correct value for your system configuration.
  5. Select an existing BlackBerry push configuration, and click Properties to view its current settings.
  6. (Optional) create a new BlackBerry push configuration.
    1. Click New.
    2. Enter the Name of the configuration.
    3. Enter the URL of the delivery service host. The URL is in the format: http://<DNS or IP address>:<port number>. The default port is 8080.
    4. (Optional) Enter a User name and Password required to access the URL. Confirm the password.
    5. BES (BlackBerry Enterprise Server) is selected by default.
    6. (Optional) Click PAP to enable the Push Access Protocol (PAP), if you are using a Push Proxy Gateway to deliver messages.
    7. Click OK.
Parent topic: Messaging