CREATE DATABASE Statement

Syntax

CREATE DATABASE db-name
… [ [ TRANSACTION ] { LOG ON [ log-file-name ]
      [ MIRROR mirror-file-name ] } ]
… [ CASE { RESPECT | IGNORE } ]
… [ PAGE SIZE page-size ]
… [ COLLATION collation-label[( collation-tailoring-string ) ] ]
… [ ENCRYPTED [ TABLE ] {algorithm-key-spec | OFF } ]
… { … [ BLANK PADDING ON ]
… [ JCONNECT { ON | OFF } ]
… [ IQ PATH iq-file-name ]
… [ IQ SIZE iq-file-size ]
… [ IQ PAGE SIZE iq-page-size ]
… [ BLOCK SIZE block-size ]
… [ IQ RESERVE sizeMB ]
… [ TEMPORARY RESERVE sizeMB ]
… [ MESSAGE PATH message-file-name ]
… [ TEMPORARY PATH temp-file-name ]
… [ TEMPORARY SIZE temp-db-size ]
… [ DBA USER userid ]
… [ DBA PASSWORD password ]
… [ SYSTEM PROCEDURE AS DEFINER {ON | OFF} ]

Parameters

• db-name | log-file-name | mirror-file-name | iq-file-name | message-file-name | temp-file-name – 'file-name'
• page-size – { 4096 | 8192 | 16384 | 32768 }
• iq-page-size – { 65536 | 131072 | 262144 | 524288 }
• block-size – { 4096 | 8192 | 16384 | 32768 }
• collation-label – string
• collation-tailoring-string – keyword=value
• algorithm-key-spec – ON | [ ON ] KEY key [ ALGORITHM AES-algorithm ] | [ ON ] ALGORITHM AES-algorithm KEY key | [ ON ] ALGORITHM ‘SIMPLE’
• AES-algorithm – ‘AES’ | ‘AES256’ | ‘AES_FIPS’ | ‘AES256_FIPS’
• key – quoted string

Examples

• Example 1 – This Windows example creates an SAP Sybase IQ database named mydb with its corresponding mydb.db, mydb.iq, mydb.iqtmp, and mydb.iqmsg files in the C:\s1\data directory:

  CREATE DATABASE 'C:\\s1\\data\\mydb'
  BLANK PADDING ON
  IQ PATH 'C:\\s1\\data'
  IQ SIZE 2000
  IQ PAGE SIZE 65536

• Example 2 – This UNIX command creates an SAP Sybase IQ database with raw devices for IQ PATH and TEMPORARY PATH. The default IQ page size of 128KB applies.

  CREATE DATABASE '/s1/data/bigdb'
  IQ PATH '/dev/md/rdsk/bigdb'
  MESSAGE PATH '/s1/data/bigdb.iqmsg'
  TEMPORARY PATH '/dev/md/rdsk/bigtmp'

• Example 3 – This Windows command creates an SAP Sybase IQ database with a raw device for IQ PATH. Note the doubled backslashes in the raw device name (a Windows requirement):

  CREATE DATABASE 'company'
  IQ PATH '\\\\.\\E:'
  JCONNECT OFF
  IQ SIZE 40

• Example 4 – This UNIX example creates a strongly encrypted SAP Sybase IQ database using the AES encryption algorithm with the key “is!seCret.”

  CREATE DATABASE 'marvin.db'
  BLANK PADDING ON
  CASE RESPECT
  COLLATION 'ISO_BINENG'
  IQ PATH '/filesystem/marvin.main1'
  IQ SIZE 6400
  IQ PAGE SIZE 262144
  TEMPORARY PATH '/filesystem/marvin.temp1'
  TEMPORARY SIZE 3200
  ENCRYPTED ON KEY 'is!seCret' ALGORITHM 'AES'

Usage

Creates a database with the supplied name and attributes. The IQ PATH clause is required for creating the SAP Sybase IQ database; otherwise, you create a standard SQL Anywhere database.

If you omit the IQ PATH option, specifying any of these options generates an error: IQ SIZE, IQ PAGE SIZE, BLOCK SIZE, MESSAGE PATH, TEMPORARY PATH, and TEMPORARY SIZE.

When SAP Sybase IQ creates a database, it automatically generates four database files to store different types of data that constitute a database. Each file corresponds to a dbspace, the logical name by which SAP Sybase IQ identifies database files. The files are:

In addition to these files, a database has a transaction log file (db-name.log), and might have a transaction log mirror file.

File names and the CREATE DATABASE statement:

Relative path names are recommended.

ln -s /disk1/company/iqdata/company.iq company_iq_store

Once you create this link, you can specify the symbolic link in commands like CREATE DATABASE or RESTORE instead of the fully qualified path name.

When you create a database or a dbspace, the path for every dbspace file must be unique. If your CREATE DATABASE command specifies the identical path and file name for these two stores, you receive an error.

Clauses and options of CREATE DATABASE:

TRANSACTION LOG—The transaction log is a file where the database server logs all changes made to the database. The transaction log plays a key role in system recovery. If you do not specify any TRANSACTION LOG clause, or if you omit a path for the file name, it is placed in the same directory as the .db file. However, you should place it on a different physical device from the .db and .iq. It cannot be created on a raw partition.

CASE—For databases created with CASE RESPECT, all affected values are case-sensitive in comparisons and string operations. Database object names such as columns, procedures, or user IDs, are unaffected. Dbspace names are always case-insensitive, regardless of the CASE specification.

The default (RESPECT) is that all comparisons are case-sensitive. CASE RESPECT provides better performance than CASE IGNORE.

Character strings inserted into tables are always stored in the case they are entered, regardless of whether the database is case-sensitive or not. If the string Value is inserted into a character data type column, the string is always stored in the database with an uppercase V and the remainder of the letters lowercase. SELECT statements return the string as Value. If the database is not case-sensitive, however, all comparisons make Value the same as value, VALUE, and so on. The SAP Sybase IQ server may return results in any combination of lowercase and uppercase, so you cannot expect case-sensitive results in a database that is case-insensitive (CASE IGNORE).

For example, given this table and data:

CREATE TABLE tb (id int NOT NULL,
                 string VARCHAR(30) NOT NULL);
INSERT INTO tb VALUES (1, ‘ONE’);
SELECT * FROM tb WHERE string = ‘oNe’;

The result of the SELECT can be “oNe” (as specified in the WHERE clause) and not necessarily “ONE” (as stored in the database).

Similarly, the result of:

SELECT * FROM tb WHERE string = ‘One’;

can be “One” and the result of:

SELECT * FROM tb WHERE string = ‘ONe’;

can be “ONe”.

All databases are created with at least one user ID:

DBA

and password:

sql

In new databases, all passwords are case-sensitive, regardless of the case-sensitivity of the database. The user ID is unaffected by the CASE RESPECT setting.

PAGE SIZE —The page size for the SQL Anywhere segment of the database (containing the catalog tables) can be 4096, 8192, 16384, or 32768 bytes. Normally, use the default, 4096 (4KB). Large databases might need a larger page size than the default and may see performance benefits as a result. The smaller values might limit the number of columns your database can support. If you specify a page size smaller than 4096, SAP Sybase IQ uses a page size of 4096.

When you start a database, its page size cannot be larger than the page size of the current server. The server page size is taken from the first set of databases started or is set on the server command line using the -gp command line option.

Command line length for any statement is limited to the catalog page size. The 4KB default is large enough in most cases; however, in a few cases, a larger PAGE SIZE value is needed to accommodate very long commands, such as RESTORE commands that reference numerous dbspaces. A larger page size might also be needed to execute queries involving large numbers of tables or views.

Because the default catalog page size is 4KB, this is a problem only when the connection is to a database such as utility_db, which has a page size of 1024. This restriction may cause RESTORE commands that reference numerous dbspaces to fail. To avoid the problem, make sure the length of SQL command lines is less than the catalog page size.

Alternatively, start the engine with -gp 32768 to increase catalog page size.

COLLATION—The collation sequence used for sorting and comparison of character data types in the database. The collation provides character comparison and ordering information for the encoding (character set) being used. If the COLLATION clause is not specified, SAP Sybase IQ chooses a collation based on the operating system language and encoding.

For most operating systems, the default collation sequence is ISO_BINENG, which provides the best performance. In ISO_BINENG, the collation order is the same as the order of characters in the ASCII character set. All uppercase letters precede all lowercase letters (for example, both ‘A’ and ‘B’ precede ‘a’).

You can choose the collation from a list of supported collations. For SQL Anywhere databases created on an SAP Sybase IQ server, the collation can also be the Unicode Collation Algorithm (UCA). If UCA is specified, also specify the ENCODING clause.

SAP Sybase IQ does not support any of the UCA-based collations for IQ databases. If a UCA-based collation is specified in the CREATE DATABASE statement for a database, the server returns the error UCA collation is not supported and database creation fails.

It is important to carefully choose your collation; it cannot be changed after the database is created.

Optionally, you can specify collation tailoring options (collation-tailoring-string) for additional control over the sorting and comparing of characters. These options take the form of keyword=value pairs, assembled in parentheses, following the collation name.

Collation tailoring options for SAP Sybase IQ contains the supported keyword, allowed alternate forms, and allowed values for the collation tailoring option (collation-tailoring-string) for an SAP Sybase IQ database.

ENCRYPTED—Encryption makes the data stored in your physical database file unreadable. Use the CREATE DATABASE ENCRYPTED keyword without the TABLE keyword to encrypt the entire database. Use the ENCRYPTED TABLE clause to enable only table encryption for SQL Anywhere tables. Table-level encryption is not supported for SAP Sybase IQ tables. Enabling table encryption means that the tables that are subsequently created or altered using the ENCRYPTED clause are encrypted using the settings you specified at database creation.

You can specify encryption only during database creation. To introduce encryption to an existing database requires a complete unload, database re-creation, and reload of all data.

If the ENCRYPTED clause is used but no algorithm is specified, the default is AES. By default, encryption is OFF.

BLANK PADDING—By default, trailing blanks are ignored for comparison purposes (BLANK PADDING ON), and Embedded SQL programs pad strings that are fetched into character arrays. This option is provided for compatibility with the ISO/ANSI SQL standard.

For example, these two strings are treated as equal in a database created with BLANK PADDING ON:

'Smith'
'Smith   '

JCONNECT—To use the SAP Sybase jConnect for JDBC driver to access system catalog information, install jConnect support. Set JCONNECT to OFF to exclude the jConnect system objects (the default is ON). You can still use JDBC, as long as you do not access system information.

IQ PATH—The path name of the main segment file containing the SAP Sybase IQ data. You can specify an operating system file or a raw partition of an I/O device. (The Installation and Configuration Guide guide for your platform describes the format for specifying a raw partition.) SAP Sybase IQ automatically detects which type based on the path name you specify. If you use a relative path, the file is created relative to the directory of the catalog store (the .db file).

IQ SIZE—The size in MB of either the raw partition or the operating system file you specify with the IQ PATH clause. For raw partitions, you should always take the default by not specifying IQ SIZE, which allows SAP Sybase IQ to use the entire raw partition; if you specify a value for IQ SIZE, the value must match the size of the I/O device or SAP Sybase IQ returns an error. For operating system files, you can specify a value from the minimum in the following table up to a maximum of 4TB.

The default size for an operating system file depends on IQ PAGE SIZE:

IQ PAGE SIZE—The page size, in bytes, for the SAP Sybase IQ segment of the database (containing the IQ tables and indexes). The value must be a power of 2, from 65536 to 524288 bytes. The default is 131072 (128KB). Other values for the size are changed to the next larger size. The IQ page size determines the default I/O transfer block size and maximum data compression for your database.

Very wide tables, such as tables with multiple columns of wide VARCHAR data (columns from 255 to 32,767 bytes) might need the next larger IQ PAGE SIZE.

BLOCK SIZE—The I/O transfer block size, in bytes, for the SAP Sybase IQ segment of the database. The value must be less than IQ PAGE SIZE, and must be a power of two between 4096 and 32768. Other values for the size are changed to the next larger size. The default value depends on the value of the IQ PAGE SIZE clause. For most applications, the default value is optimum.

IQ RESERVE—Specifies the size, in megabytes, of space to reserve for the main IQ store (IQ_SYSTEM_MAIN dbspace), so that the dbfile can be increased in size in the future. The sizeMB parameter can be any number greater than 0. You cannot change the reserve after the dbspace is created.

When IQ RESERVE is specified, the database uses more space for internal (free list) structures. If reserve size is too large, the space needed for the internal structures can be larger than the specified size, which results in an error.

TEMPORARY RESERVE clause—Specifies the size, in megabytes, of space to reserve for the temporary IQ store (IQ_SYSTEM_TEMP dbspace), so that the dbfile can be increased in size in the future. The sizeMB parameter can be any number greater than 0. You cannot change the reserve after the dbspace is created.

When TEMPORARY RESERVE is specified, the database uses more space for internal (free list) structures. If reserve size is too large, the space needed for the internal structures can be larger than the specified size, which results in an error.

MESSAGE PATH—The path name of the segment containing the SAP Sybase IQ messages trace file. You must specify an operating system file; the message file cannot be on a raw partition. If you use a relative path or omit the path, the message file is created relative to the directory of the .db file.

TEMPORARY PATH—The path name of the temporary segment file containing the temporary tables generated by certain queries. You can specify an operating system file or a raw partition of an I/O device. (The Installation and Configuration Guide guide for your platform describes the format for specifying a raw partition.) SAP Sybase IQ automatically detects which type based on the path name you specify. If you use a relative path or omit the path, the temporary file is created relative to the directory of the .db file.

TEMPORARY SIZE—The size, in megabytes, of either the raw partition or the operating system file you specify with the TEMPORARY PATH clause. For raw partitions, always use the default by not specifying TEMPORARY SIZE, which allows SAP Sybase IQ to use the entire raw partition. The default for operating system files is always one-half the value of IQ SIZE. If the IQ store is on a raw partition and the temporary store is an operating system file, the default TEMPORARY SIZE is half the size of the IQ store raw partition.

DBA USER—The user name for the default user account granted the SYS_AUTH_DBA_ROLE system role. If you do not specify this clause, SAP Sybase IQ creates a default dba user ID.

DBA PASSWORD—The password for the default user account granted the SYS_AUTH_DBA_ROLE system role.

Standards

Permissions

The account under which the server is running must have write permissions on the directories where files are created.