Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
| Error 1469 | "The specified polygon format '%1' is not supported for this type of spatial reference system" |
|---|---|
Constant | SLERR_DDL_SRS_POLYFORMAT |
SAP Sybase Error Number | 3139 |
SQL State | 2FW62 |
SQL Code | -1469L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The polygon format string. |
Probable Cause | The specified polygon format is not supported for this type of spatial reference system. |
| Error 1470 | "Invalid storage format '%1'" |
|---|---|
Constant | SLERR_DDL_SRS_STGFORMAT |
SAP Sybase Error Number | 3140 |
SQL State | 2FW63 |
SQL Code | -1470L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The invalid storage format string. |
Probable Cause | The specified storage format string is not valid. |
| Error 1471 | "Spatial reference system %1 cannot be modified because it is in use" |
|---|---|
Constant | SLERR_DDL_SRS_INUSE |
SAP Sybase Error Number | 3141 |
SQL State | 2FW64 |
SQL Code | -1471L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The coordinate system name |
Probable Cause | The coordinate system is currently in use and cannot be dropped. |
| Error 1472 | "Spatial reference system \"%1\" is reserved" |
|---|---|
Constant | SLERR_DDL_SRS_RESERVED |
SAP Sybase Error Number | 3142 |
SQL State | 2FW65 |
SQL Code | -1472L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The name of the reserved spatial reference system. |
Probable Cause | The named spatial reference system is reserved for system use. |
| Error 1473 | "Spatial unit of measure \"%1\" is reserved" |
|---|---|
Constant | SLERR_DDL_UOM_RESERVED |
SAP Sybase Error Number | 3143 |
SQL State | 2FW66 |
SQL Code | -1473L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The name of the reserved unit of measure. |
Probable Cause | The named unit of measure is reserved for system use. |
| Error 1474 | "SRID %1 is referenced by column '%2' of table '%3'" |
|---|---|
Constant | SLERR_SRS_INUSE_TAB |
SAP Sybase Error Number | 3144 |
SQL State | 2FW67 |
SQL Code | -1474L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The spatial reference system identifier. |
Parameter 2 | The name of the referencing column. |
Parameter 3 | The name of the referencing table. |
Probable Cause | The specified spatial reference system is in use by the column of a table, and it cannot be modified. |
| Error 1475 | "SRID %1 is referenced by parameter '%2' of procedure '%3'" |
|---|---|
Constant | SLERR_SRS_INUSE_PROC |
SAP Sybase Error Number | 3145 |
SQL State | 2FW68 |
SQL Code | -1475L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The spatial reference system identifier. |
Parameter 2 | The referencing parameter name. |
Parameter 3 | The referencing procedure name. |
Probable Cause | The specified spatial reference system is in use by the parameter of a procedure, and it cannot be modified. |
| Error 1476 | "SRID %1 is referenced by domain \"%3\".\"%2\No message |
|---|---|
Constant | SLERR_SRS_INUSE_TYPE |
SAP Sybase Error Number | 3146 |
SQL State | 2FW69 |
SQL Code | -1476L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The spatial reference system identifier. |
Parameter 2 | The owner of the domain. |
Parameter 3 | The name of the domain. |
Probable Cause | The specified spatial reference system is in use by a user-defined domain, and it cannot be modified. |
| Error 1477 | "The SRID %1 does not identify a geographic spatial reference system" |
|---|---|
Constant | SLERR_NOT_GEOGRAPHIC |
SAP Sybase Error Number | 3147 |
SQL State | 2FW70 |
SQL Code | -1477L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The spatial reference system identifier. |
Probable Cause | The methods ST_Lat() and ST_Long() can only be used for geographic spatial reference systems. |
| Error 1478 | "ST_Geometry arguments not supported by SQL function %1" |
|---|---|
Constant | SLERR_SPATIAL_IN_BUILTIN |
SAP Sybase Error Number | 3148 |
SQL State | 2FW71 |
SQL Code | -1478L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The name of the SQL function. |
Probable Cause | The specified SQL function does not support geometry parameters. |
| Error 1479 | "An expression of type %1 is not union-compatible with type %2" |
|---|---|
Constant | SLERR_NOT_UNION_COMPAT |
SAP Sybase Error Number | 3149 |
SQL State | 2FW72 |
SQL Code | -1479L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The type of expression 1. |
Parameter 2 | The type of expression 2. |
Probable Cause | The two types cannot be combined, for example in a set operation such as UNION or in a SQL function such as COALESCE. |
| Error 1480 | "An internal error has occurred in the spatial library" |
|---|---|
Constant | SLERR_INTERNAL_ERROR |
SAP Sybase Error Number | 3150 |
SQL State | 2FW73 |
SQL Code | -1480L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | An unexpected error occurred. |
| Error 1482 | "Curve contains nearly antipodal points %1 and %2 (near '%3')" |
|---|---|
Constant | SLERR_NEARLY_ANTIPODAL |
SAP Sybase Error Number | 3152 |
SQL State | 2FW77 |
SQL Code | -1482L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The first point. |
Parameter 2 | The second point. |
Parameter 3 | The value or method where the error was detected. |
Probable Cause | A curve contains two points that are nearly antipodal. These define an ambiguous segment in a round-Earth spatial reference system. |
| Error 1483 | "LineString must contain at least 2 points (near '%1')" |
|---|---|
Constant | SLERR_LINESTRING_MIN_POINTS |
SAP Sybase Error Number | 3153 |
SQL State | 2FW78 |
SQL Code | -1483L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The value or method where the error was detected. |
Probable Cause | The linestring contains only a single point. |
| Error 1484 | "Value %1 out of range for coordinate %2 (SRS bounds [%3, %4] exceeded by more than 50%)" |
|---|---|
Constant | SLERR_OBJECT_OUT_OF_SRS_BOUNDS |
SAP Sybase Error Number | 3154 |
SQL State | 2FW79 |
SQL Code | -1484L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The value is out of the defined bounds. |
Parameter 2 | The coordinate name that is out of range. |
Parameter 3 | The minimum value allowed by the spatial reference system. |
Parameter 4 | The maximum value allowed by the spatial reference system. |
Probable Cause | The geometry contains a point outside of the bounds specified by the spatial reference system. |
| Error 1485 | "Invalid polygon: ring is not closed (near '%1')" |
|---|---|
Constant | SLERR_INVALID_POLY_RING_CLOSE |
SAP Sybase Error Number | 3155 |
SQL State | 2FW80 |
SQL Code | -1485L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The value or method where the error was detected. |
Probable Cause | One of the provided curves is not a closed ring. |
| Error 1486 | "Invalid polygon: ring has zero area (near '%1')" |
|---|---|
Constant | SLERR_INVALID_POLY_EMPTY_RING |
SAP Sybase Error Number | 3156 |
SQL State | 2FW81 |
SQL Code | -1486L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The value or method where the error was detected. |
Probable Cause | One of the provided rings has zero area and cannot be a valid polygon ring. |
| Error 1487 | "Invalid polygon: curve is not a ring" |
|---|---|
Constant | SLERR_INVALID_POLY_NON_RING |
SAP Sybase Error Number | 3157 |
SQL State | 2FW82 |
SQL Code | -1487L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | One of the curves is not a ring and cannot be used to form a polygon. |
| Error 1488 | "Invalid polygon: ring is larger than allowed for SRID=%1 (near '%2')" |
|---|---|
Constant | SLERR_INVALID_POLY_RE_SIZE |
SAP Sybase Error Number | 3158 |
SQL State | 2FW83 |
SQL Code | -1488L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The spatial reference system identifier. |
Parameter 2 | The value or method where the error was detected. |
Probable Cause | One of the rings is larger than the specified spatial reference system supports. |
| Error 1489 | "Position %1 is invalid (should be between %2 and %3)" |
|---|---|
Constant | SLWARN_INVALID_POSITION |
SAP Sybase Error Number | 3159 |
SQL State | 01F01 |
SQL Code | -1489L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | The provided position. |
Parameter 2 | The minimum supported position. |
Parameter 3 | The maximum supported position. |
Probable Cause | The provided position is not valid. It should be between the specified minimum and maximum. |