Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
| Warning 1012046 | "(%1) Please mount archive media on '%2'. It will be the IQ MASTER archive for database '%3'." |
|---|---|
Constant | EMSG_BACKUP_MOUNT_MASTERMEDIA |
SAP Sybase Error Number | 20969 |
SQL State | 01A46 |
SQL Code | 1012046L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | explanation of %1 |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | No additional information available. |
| Warning 1012047 | "(%1) Please mount archive media on '%2'. It will be the Backup Server archive for database '%3'." |
|---|---|
Constant | EMSG_BACKUP_MOUNT_BACKUPSERVERMEDIA |
SAP Sybase Error Number | 20970 |
SQL State | 01A47 |
SQL Code | 1012047L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | explanation of %1 |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | No additional information available. |
| Warning 1012048 | "(%1) Archive media mounted on '%2'." |
|---|---|
Constant | EMSG_BACKUP_ARCHIVEMEDIA_MOUNTED |
SAP Sybase Error Number | 20971 |
SQL State | 01U48 |
SQL Code | 1012048L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | explanation of %1 |
Parameter 2 | explanation of %2 |
Probable Cause | No additional information available. |
| Warning 1012049 | "(%1) Done with archive media on '%2'." |
|---|---|
Constant | EMSG_BACKUP_ARCHIVEMEDIA_CLOSED |
SAP Sybase Error Number | 20972 |
SQL State | 01U49 |
SQL Code | 1012049L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | explanation of %1 |
Parameter 2 | explanation of %2 |
Probable Cause | No additional information available. |
| Error 1012050 | "Bad opcode detected during restore. Expected opcode is '%2', but '%3' was seen. %1" |
|---|---|
Constant | EMSG_HEADER_BADOPCODE |
SAP Sybase Error Number | 20974 |
SQL State | QUA50 |
SQL Code | -1012050L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | This is an internal error. If this error occurs it should be reported to Sybase. |
| Error 1012051 | "An invalid database segment number (%2, %3) has been detected. %1" |
|---|---|
Constant | EMSG_HEADER_BAD_SEGMENTNUMBER |
SAP Sybase Error Number | 20975 |
SQL State | QUA51 |
SQL Code | -1012051L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | This is an internal error. If this error occurs, it should be reported to Sybase. |
| Error 1012052 | "Programming error: looking for hole '%2', but only have '%3'. %1" |
|---|---|
Constant | EMSG_HEADER_HOLE_ERROR |
SAP Sybase Error Number | 20976 |
SQL State | QUA52 |
SQL Code | -1012052L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | This is an internal error. If this error occurs it should be reported to Sybase. |
| Error 1012053 | "Fatal internal error: looking for segment containing hole {%2,%3}, but none was found. %1" |
|---|---|
Constant | EMSG_HEADER_HOLE_LOOKUP_ERROR |
SAP Sybase Error Number | 20977 |
SQL State | QUA53 |
SQL Code | -1012053L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation of %2 |
Parameter 3 | explanation of %3 |
Probable Cause | This is an internal error. If this error occurs, it should be reported to Sybase. |
| Error 1012054 | "Fatal internal error: looking for segment containing block '%2', but none was found. %1" |
|---|---|
Constant | EMSG_BACKUP_SEGMENT_NUMBER_ERROR |
SAP Sybase Error Number | 20978 |
SQL State | QUA54 |
SQL Code | -1012054L |
ODBC 2 State | ERRORi |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation of %2 |
Probable Cause | This is an internal error. If this error occurs, it should be reported to Sybase. |
| Error 1012055 | "RESTORE VERIFY has found errors with the archive. %1" |
|---|---|
Constant | EMSG_RESTORE_VERIFY_FAILED_WITH_ERRORS |
SAP Sybase Error Number | 21207 |
SQL State | QUA55 |
SQL Code | -1012055L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | The verification of the provided archive has failed. Please check the server log for details of errors which were thrown during the verification process. |
| Warning 1012056 | "Total number of IQ blocks verified: %1/%2 ( %3%% )" |
|---|---|
Constant | EMSG_RESTORE_VERIFY_PROGRESS |
SAP Sybase Error Number | 21208 |
SQL State | QUA56 |
SQL Code | 1012056L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | Parameter 1 description |
Parameter 2 | Parameter 2 description |
Parameter 3 | Parameter 3 description |
Probable Cause | This is an informational message displayed in context with other messages. |
| Error 1012057 | "Command specified for virtual backup failed. %1" |
|---|---|
Constant | EMSG_BACKUP_VIRTUAL_CMD_FAILED |
SAP Sybase Error Number | 21209 |
SQL State | QUA57 |
SQL Code | -1012057L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
| Error 1012058 | "IQ cache dbspace %2 is readonly. Backup will not be done. %1" |
|---|---|
Constant | EMSG_BACKUP_DBSPACE_READONLY |
SAP Sybase Error Number | 22167 |
SQL State | QUA42 |
SQL Code | -1012058L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace to backup |
Probable Cause | cache dbspace to backup must be readwrite. |
| Warning 1013000 | "*** BlockSize: %2, Block size: Record size: %1" |
|---|---|
Constant | EMSG_ISQL_RECORDBLOCKING |
SAP Sybase Error Number | 20570 |
SQL State | 00A00 |
SQL Code | 1013000L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | record size |
Parameter 2 | block size |
Probable Cause | No additional information available. |
| Warning 1013001 | "*** Record size: variable, Block size: %1" |
|---|---|
Constant | EMSG_ISQL_RECORDBLOCKSIZE |
SAP Sybase Error Number | 20571 |
SQL State | 00A01 |
SQL Code | 1013001L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | block size |
Probable Cause | No additional information available. |
| Warning 1013015 | "Row Delimiter: %1" |
|---|---|
Constant | EMSG_ISQL_PREVIEWROWD |
SAP Sybase Error Number | 20585 |
SQL State | 00A15 |
SQL Code | 1013015L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | row delimiter |
Probable Cause | This is the ROW DELIMITER used for the LOAD. |
| Error 1013015 | "Multi-column indexes that are non unique or of more than 5300 bytes in total width are not supported. %1" |
|---|---|
Constant | EMSG_SQL_MULTICOLWIDTH |
SAP Sybase Error Number | 20584 |
SQL State | QCA15 |
SQL Code | -1013015L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Multicolumn indexes that are non unique or of more than 1024 bytes in total width are not supported. The total width is obtained by summing the individual widths of the various columns involved in the multicolumn index. |
| Error 1013016 | "FILLER" |
|---|---|
Constant | EMSG_ISQL_FILLERNAME |
SAP Sybase Error Number | 20586 |
SQL State | QCA16 |
SQL Code | -1013016L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1013017 | "An internal error occurred while calling a method on a db_sql_*_identifier. Object does not have an IIndex Handle. %1" |
|---|---|
Constant | EMSG_SQL_NOINDEX |
SAP Sybase Error Number | 20587 |
SQL State | QCA17 |
SQL Code | -1013017L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | This error should not occur during normal operation. It is an internal error. If this error occurs, it should be reported to Sybase. |
| Error 1013018 | "An internal error occurred while calling a method on db_sql_*_identifier. Object does not have an IColumn Handle. %1" |
|---|---|
Constant | EMSG_SQL_NOCOLUMN |
SAP Sybase Error Number | 20588 |
SQL State | QCA18 |
SQL Code | -1013018L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | This error should not occur during normal operation. It is an internal error. If this error occurs, it should be reported to Sybase. |