Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1009105 | "Could not find block: %2. %1" |
---|---|
Constant | EMSG_VDO_BLKNOTFOUND |
SAP Sybase Error Number | 20126 |
SQL State | QSB05 |
SQL Code | -1009105L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Block Number |
Probable Cause | No additional information available. |
Error 1009106 | "DBFILE '%2' is not valid. The catalog file id is incorrect. FileID found: %3 FileID expected: %4. This segment cannot be used. %1" |
---|---|
Constant | EMSG_SDBEXT_BAD_CATFILEID |
SAP Sybase Error Number | 20127 |
SQL State | QSB06 |
SQL Code | -1009106L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | Segment name. |
Parameter 3 | FileID found on the disk segment header. |
Parameter 4 | FileID expected to be found on the disk segment header. |
Probable Cause | The FileID information stored on the disk segment's header is not correct. The disk segment cannot be used. |
Error 1009107 | "Duplicate entry for block: %2, record %3. %1" |
---|---|
Constant | EMSG_VDO_DUPENTRY |
SAP Sybase Error Number | 20128 |
SQL State | QSB07 |
SQL Code | -1009107L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Block with duplication entry. |
Parameter 3 | Duplicate entry. |
Probable Cause | No additional information available. |
Error 1009108 | "Database segment '%2' is not valid. Startblock found in the header: %3 Startblock expected: %4. This segment cannot be used. %1" |
---|---|
Constant | EMSG_SDBEXT_BAD_STARTBLOCK |
SAP Sybase Error Number | 20129 |
SQL State | QSB08 |
SQL Code | -1009108L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | Name of the segment. |
Parameter 3 | Starting block found in the disk header. |
Parameter 4 | Starting block expected. |
Probable Cause | The start block of the disk segment that was found in the disk segment header is not the same as what was expected. The disk segment cannot be used. |
Error 1009109 | "Key size %2 is more than the maximum %3. %1" |
---|---|
Constant | EMSG_VDO_KEYTOOBIG |
SAP Sybase Error Number | 20130 |
SQL State | QSB09 |
SQL Code | -1009109L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Key size. |
Parameter 3 | Max key size. |
Probable Cause | No additional information available. |
Error 1009110 | "%1" |
---|---|
Constant | EMSG_RFU_QSB10 |
SAP Sybase Error Number | 20131 |
SQL State | QSB10 |
SQL Code | -1009110L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009111 | "Could not find record %2 within block %3. %1" |
---|---|
Constant | EMSG_VDO_RECNOTFOUND |
SAP Sybase Error Number | 20132 |
SQL State | QSB11 |
SQL Code | -1009111L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Record that could not be found. |
Parameter 3 | Block being searched. |
Probable Cause | No additional information available. |
Error 1009112 | "%1" |
---|---|
Constant | EMSG_RFU_QSB12 |
SAP Sybase Error Number | 20133 |
SQL State | QSB12 |
SQL Code | -1009112L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009113 | "Secondary error noted. Semi-Join not ready %2. %1" |
---|---|
Constant | EMSG_SECONDARY_ERR |
SAP Sybase Error Number | 20134 |
SQL State | QSB13 |
SQL Code | -1009113L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | more information about join node for which semi-join is not ready. |
Probable Cause | No additional information available. |
Error 1009114 | "Tried to put too many records %2 into block %3. %1" |
---|---|
Constant | EMSG_VDO_TOOMANYRECS |
SAP Sybase Error Number | 20135 |
SQL State | QSB14 |
SQL Code | -1009114L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Number of records. |
Parameter 3 | Block being inserted into. |
Probable Cause | No additional information available. |
Error 1009115 | "Database segment '%2' is not valid. %3 imaginary freelist blocks were found, but %4 imaginary freelist blocks were expected. This segment cannot be used. %1" |
---|---|
Constant | EMSG_SDBEXT_DIF_NIBLOCKS |
SAP Sybase Error Number | 20136 |
SQL State | QSB15 |
SQL Code | -1009115L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | Name of the segment. |
Parameter 3 | Number of imaginary freelist blocks recorded in the segment header. |
Parameter 4 | Number of freelist blocks that were expected to be recorded in the header. |
Probable Cause | When a database segment is opened, the segment header is read and the number of freelist blocks read from the header is compared with the number of freelist blocks that are expected to be read from the segment header. If the numbers do not match, the segment cannot be used and the database must be restored from backup. |
Error 1009116 | "Wrong new() was called. %1" |
---|---|
Constant | EMSG_VDO_WRONGNEW |
SAP Sybase Error Number | 20137 |
SQL State | QSB16 |
SQL Code | -1009116L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009117 | "Update can not do different sized values yet. New size = %2, old size = %3. %1" |
---|---|
Constant | EMSG_VDO_UPDATESIZE |
SAP Sybase Error Number | 20138 |
SQL State | QSB17 |
SQL Code | -1009117L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | New size. |
Parameter 3 | Old size. |
Probable Cause | No additional information available. |
Error 1009118 | "Database segment '%2' is not valid. %3 freelist blocks were found, but %4 freelist blocks were expected. This segment cannot be used. %1" |
---|---|
Constant | EMSG_SDBEXT_DIF_NFLBLOCKS |
SAP Sybase Error Number | 20139 |
SQL State | QSB18 |
SQL Code | -1009118L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | Name of the segment. |
Parameter 3 | Number of freelist blocks recorded in the segment header. |
Parameter 4 | Number of freelist blocks that were expected to be recorded in the header. |
Probable Cause | When a database segment is opened, the segment header is read and the number of freelist blocks read from the header is compared with the number of freelist blocks that are expected to be read from the segment header. If the numbers do not match, the segment cannot be used and the database must be restored from backup. |
Error 1009119 | "Record size too large for database page size. %1" |
---|---|
Constant | EMSG_SORT_INVALIDRECSIZE |
SAP Sybase Error Number | 20140 |
SQL State | QSB19 |
SQL Code | -1009119L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Warning 1009120 | " %1 Sort: Sorted #%2, %3 Recs, %4 Secs" |
---|---|
Constant | EMSG_SORT_INFOSORTED |
SAP Sybase Error Number | 20141 |
SQL State | QSB20 |
SQL Code | 1009120L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | What is being sorted. |
Parameter 2 | Which particular run of the sort. |
Parameter 3 | How many records were sorted. |
Parameter 4 | How long the sort took. |
Probable Cause | No additional information available. |
Warning 1009121 | " %1 Sort: Saved #%2, %3 Recs, %4 Secs" |
---|---|
Constant | EMSG_SORT_INFOSAVED |
SAP Sybase Error Number | 20142 |
SQL State | QSB21 |
SQL Code | 1009121L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | What is being sorted. |
Parameter 2 | Which particular run of the sort. |
Parameter 3 | How many records were sorted. |
Parameter 4 | How long the sort took. |
Probable Cause | No additional information available. |
Warning 1009122 | " %1 Sort: Merged %2 runs, %3 Secs, %4 runs remaining" |
---|---|
Constant | EMSG_SORT_INFOMERGED |
SAP Sybase Error Number | 20143 |
SQL State | QSB22 |
SQL Code | 1009122L |
ODBC 2 State | OK |
ODBC 3 State | OK |
Severity Code | |
Parameter 1 | What is being sorted. |
Parameter 2 | How many merged. |
Parameter 3 | Time taken. |
Parameter 4 | How many runs still requiring to be merged. |
Probable Cause | No additional information available. |
Error 1009123 | "Database Segment %2 is not valid. Missing DBSignature. This Segment can not be used. %1" |
---|---|
Constant | EMSG_SDBEXT_BAD_DBSIGNATURE |
SAP Sybase Error Number | 20144 |
SQL State | QSB23 |
SQL Code | -1009123L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Database segment. |
Probable Cause | No additional information available. |
Error 1009124 | "Database Segment %2, blocksize %3 does not match catalog blocksize of %4. This Segment can not be used. %1" |
---|---|
Constant | EMSG_SDBEXT_DIF_BLOCKSIZE |
SAP Sybase Error Number | 20145 |
SQL State | QSB24 |
SQL Code | -1009124L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Database segment. |
Parameter 3 | Block size. |
Parameter 4 | Catalog Block size. |
Probable Cause | No additional information available. |