Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1009044 | "An IO error was encountered while reading a database page in %2 DBSpace. %1" |
---|---|
Constant | EMSG_BUFMAN_BIO_READ_ERROR |
SAP Sybase Error Number | 20065 |
SQL State | QSA44 |
SQL Code | -1009044L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) dbspace name |
Probable Cause | No additional information available. |
Error 1009045 | "Bitmap failed internal checks. You may have a damaged index. Please check your IQ message file for additional information. %1" |
---|---|
Constant | EMSG_BM_VERIFY |
SAP Sybase Error Number | 20066 |
SQL State | QSA45 |
SQL Code | -1009045L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Probable Cause | No additional information available. |
Error 1009046 | "%2: An error was detected on a database page. You may have a damaged index. For additional information, please check your IQ message file or run sp_iqcheckdb. %1" |
---|---|
Constant | EMSG_BUFMAN_DECOMPRESSION_ERROR |
SAP Sybase Error Number | 20067 |
SQL State | QSA46 |
SQL Code | -1009046L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Probable Cause | No additional information available. |
Error 1009047 | "%2: Blockmap info error; bmp={%3}. %1" |
---|---|
Constant | EMSG_BUFMAN_BLOCKMAP_INFO_ERROR |
SAP Sybase Error Number | 20068 |
SQL State | QSA47 |
SQL Code | -1009047L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Parameter 3 | 3) Information about the blockmap |
Probable Cause | No additional information available. |
Error 1009048 | "%2: Tried to destroy a userlocked buffer; buffer={%3} page={%4}. %1" |
---|---|
Constant | EMSG_BUFMAN_LOCK_DURINGDESTROY |
SAP Sybase Error Number | 20069 |
SQL State | QSA48 |
SQL Code | -1009048L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Parameter 3 | 3) Information about the sbuf involved, if any. |
Parameter 4 | 4) Information about the disk block header involved, if any. |
Probable Cause | No additional information available. |
Error 1009049 | "%2: The buffer manager is in an inconsistent state; buffer={%3} page={%4}. %1" |
---|---|
Constant | EMSG_BUFMAN_CORRUPT |
SAP Sybase Error Number | 20070 |
SQL State | QSA49 |
SQL Code | -1009049L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Parameter 3 | 3) Information about the sbuf involved, if any. |
Parameter 4 | 4) Information about the disk block header involved, if any. |
Probable Cause | No additional information available. |
Error 1009050 | "%2: Btype specific truncation method returned invalid size for btype. %1" |
---|---|
Constant | EMSG_BUFMAN_TRUNC_BAD |
SAP Sybase Error Number | 20071 |
SQL State | QSA50 |
SQL Code | -1009050L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Probable Cause | No additional information available. |
Error 1009051 | "An index cannot be created on a char, varchar or varbinary column greater than 255 characters. %1" |
---|---|
Constant | EMSG_VARCHAR_INDEX_NOT_SUPPORTED |
SAP Sybase Error Number | 20072 |
SQL State | QSA51 |
SQL Code | -1009051L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009052 | "Internal error. Index %2 does not yet support the requested operation. %1" |
---|---|
Constant | EMSG_INDEX_OPERATION_NOT_IMPLEMENTED |
SAP Sybase Error Number | 20073 |
SQL State | QSA52 |
SQL Code | -1009052L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | name of the index |
Probable Cause | An operation, for example SUM, was forwarded to an index, for example HG, that does not directly implement the operation. Normally, this should not be possible, but can be forced by setting command options. |
Error 1009053 | "%2: s_dbmvbio WriteCheck failed; buffer={%3} page={%4}. %1" |
---|---|
Constant | EMSG_BUFMAN_BIO_WRITECHECK |
SAP Sybase Error Number | 20074 |
SQL State | QSA53 |
SQL Code | -1009053L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | 1) location of the exception |
Parameter 2 | 2) The particular buffer cache throwing the exception. |
Parameter 3 | 3) Information about the sbuf involved, if any. |
Parameter 4 | 4) Information about the disk block header involved, if any. |
Probable Cause | No additional information available. |
Error 1009054 | "Command prohibited on a multiplex coordinator, %1" |
---|---|
Constant | EMSG_NOCMD_MPX_WRITE |
SAP Sybase Error Number | 20075 |
SQL State | QSA54 |
SQL Code | -1009054L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Command not allowed on a multiplex coordinator |
Error 1009055 | "Command prohibited on a multiplex query server, %1" |
---|---|
Constant | EMSG_NOCMD_MPX_QUERY |
SAP Sybase Error Number | 20076 |
SQL State | QSA55 |
SQL Code | -1009055L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Command not allowed on a multiplex query server |
Error 1009056 | "Command prohibited on a multiplex server, %1" |
---|---|
Constant | EMSG_NOCMD_MPX_SERVER |
SAP Sybase Error Number | 20077 |
SQL State | QSA56 |
SQL Code | -1009056L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Command not allowed on a multiplex server |
Error 1009057 | "Cannot make all dbspaces readonly while there are active or uncheckpointed readwrite transactions, %1" |
---|---|
Constant | EMSG_CANNOT_ALTER_TOALLRO |
SAP Sybase Error Number | 20078 |
SQL State | QSA57 |
SQL Code | -1009057L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Cannot make the last rw dbspace ro while there is rw activity. |
Error 1009058 | "There are no dbspaces open in readwrite mode for this RW operation, %1" |
---|---|
Constant | EMSG_NO_RWDBSPACE |
SAP Sybase Error Number | 20079 |
SQL State | QSA58 |
SQL Code | -1009058L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009059 | "Alter dbspace relocate requires at least one other readwrite dbspace (%2). %1" |
---|---|
Constant | EMSG_SDBEXT_NEEDRWFORRR |
SAP Sybase Error Number | 20080 |
SQL State | QSA59 |
SQL Code | -1009059L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace name |
Probable Cause | Cannot alter the only readwrite dbspace to relocate mode. |
Error 1009060 | "Cannot alter this dbspace to relocate mode without a readwrite dbspace (%2). %1" |
---|---|
Constant | EMSG_SDBEXT_CANNOT_ALTER_RR |
SAP Sybase Error Number | 20081 |
SQL State | QSA60 |
SQL Code | -1009060L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | dbspace name |
Probable Cause | Cannot alter the readonly segment that contains the db identity to relocate mode. |
Error 1009061 | "There must be at least one readwrite dbspace and one relocate dbspace to relocate data. %1" |
---|---|
Constant | EMSG_NOT_OK_TO_RELOCATE |
SAP Sybase Error Number | 20082 |
SQL State | QSA61 |
SQL Code | -1009061L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Must have at least one RW dbspace and one RR dbspace for sp_iqrelocate |
Error 1009063 | "Cannot alter this dbspace from relocate mode to readonly mode while there are active readwrite transactions that may be using it. %1" |
---|---|
Constant | EMSG_CANNOT_ALTER_RRTORO |
SAP Sybase Error Number | 20084 |
SQL State | QSA63 |
SQL Code | -1009063L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1009064 | "Cannot create or add file %2 for dbspace %3 until new readwrite space is added to dbspace %4 to hold the new freelist. %1" |
---|---|
Constant | EMSG_SDBEXT_NO_FREELIST_SPACE |
SAP Sybase Error Number | 20085 |
SQL State | QSA64 |
SQL Code | -1009064L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | pathname of file being created |
Parameter 3 | name of dbspace for which file is being created |
Parameter 4 | name of IQ_SYSTEM_MAIN dbspace |
Probable Cause | When creating a new dbspace in the IQ MAIN STORE, or creating a new file for a dbspace other than IQ_SYSTEM_MAIN in the IQ MAIN STORE, there must if sufficient freelist space available to describe the physical blocks we are adding to the database. If this is not the case, the above error occurs. (The space for the freelist can only be allocated in readwrite IQ_SYSTEM_MAIN files.) The corrective action is to first add a new file to the IQ_SYSTEM_MAIN dbspace so that new freelist space becomes available. |