Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 925 | "Invalid service name '%1'" |
---|---|
Constant | INVALID_SERVICE_NAME |
SAP Sybase Error Number | 2589 |
SQL State | 42W95 |
SQL Code | -925L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Name of the service. |
Probable Cause | You have attempted to create a service with an invalid name. The name may contain characters that are not allowed, or it may conflict with the URL PATH setting specified for the service. |
Error 926 | "Host variable reference in service definition must be named" |
---|---|
Constant | HOSTVAR_MUST_BE_NAMED |
SAP Sybase Error Number | 2590 |
SQL State | 42W9B |
SQL Code | -926L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | You have attempted to create a service with an unnamed host variable reference. |
Error 927 | "Service statement definition is inconsistent with service type" |
---|---|
Constant | SERVICE_STATEMENT_MISMATCH |
SAP Sybase Error Number | 2591 |
SQL State | 42W9C |
SQL Code | -927L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | Either no statement was provided for a service whose type requires one, or a statement was provided when the service type does not allow one to be defined. |
Error 928 | "Constant expressions must not appear in GROUP BY clause" |
---|---|
Constant | NO_CONSTANTS_IN_GROUP_BY |
SAP Sybase Error Number | 2592 |
SQL State | 42W9D |
SQL Code | -928L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | You used a constant in the GROUP BY clause. Constants must not appear in the GROUP BY clause for a query. References to columns in a view that are constant are permitted in a GROUP BY clause. Also, expressions that use a view column that is constant are permitted. |
Error 929 | "Constraint '%1' not found" |
---|---|
Constant | CONSTRAINT_NOT_FOUND |
SAP Sybase Error Number | 2593 |
SQL State | 42U04 |
SQL Code | -929L |
ODBC 2 State | S0002 |
ODBC 3 State | 42S23 |
Severity Code | |
Parameter 1 | Name of the constraint that could not be found. |
Probable Cause | You misspelled the name of a constraint, or the constraint you are looking for is on a different table. |
Error 930 | "Attempt to alter unnamed column constraint when named constraints exist" |
---|---|
Constant | AMBIGUOUS_CONSTRAINT |
SAP Sybase Error Number | 2594 |
SQL State | 42U05 |
SQL Code | -930 |
ODBC 2 State | S0002 |
ODBC 3 State | 42S24 |
Severity Code | |
Probable Cause | You have asked for an unnamed column constraint to be altered, but there is at least one named constraint. |
Error 931 | "Service definition requires a statement when authorization is off" |
---|---|
Constant | SERVICE_AUTH_REQUIRED |
SAP Sybase Error Number | 2595 |
SQL State | 42W9E |
SQL Code | -931L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | The service definition for the specified service type requires a statement to be specified when authorization is set to Off. |
Error 933 | "A log is required for IQ databases" |
---|---|
Constant | IQ_LOG_REQUIRED |
SAP Sybase Error Number | 2597 |
SQL State | 0AQ48 |
SQL Code | -933L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | IQ databases require the use of a transaction log file. |
Error 934 | "Unable to start specified database: Server must be upgraded to start database %1" |
---|---|
Constant | UNABLE_TO_START_DATABASE_VER_NEWER |
SAP Sybase Error Number | 2598 |
SQL State | 08W67 |
SQL Code | -934L |
ODBC 2 State | 08001 |
ODBC 3 State | 08001 |
Severity Code | |
Parameter 1 | Name of the database that could not be started, if known. |
Probable Cause | The database server was unable to start the database since the database version is newer than the server version. The server must be upgraded to at least the version of the database to be able to start the database. |
Error 935 | "Unable to start specified database: Log file error" |
---|---|
Constant | UNABLE_TO_START_DATABASE_LOG_ERROR |
SAP Sybase Error Number | 2599 |
SQL State | 08W68 |
SQL Code | -935L |
ODBC 2 State | 08001 |
ODBC 3 State | 08001 |
Severity Code | |
Probable Cause | The database server was unable to start the database since the log file is missing, for a different database, or some other reason. Check the server messages window for more details. |
Error 936 | "Too many constraints in database" |
---|---|
Constant | TOO_MANY_CONSTRAINTS |
SAP Sybase Error Number | 2600 |
SQL State | 54W02 |
SQL Code | -936L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | An attempt to create a new constraint failed because the corresponding system table is full. Reloading the database will reclaim any unused space. |
Error 937 | "Invalid reference to or operation on constraint '%1'" |
---|---|
Constant | INVALID_CONSTRAINT_REF |
SAP Sybase Error Number | 2601 |
SQL State | 42U06 |
SQL Code | -937L |
ODBC 2 State | S0002 |
ODBC 3 State | 42S23 |
Severity Code | |
Parameter 1 | Name of the constraint that cannot be used for the specified purpose. |
Probable Cause | You specified an invalid operation on a constraint. For example, you tried to alter a primary key constraint. |
Error 938 | "Recursion is not allowed without the RECURSIVE keyword" |
---|---|
Constant | RECURSIVE_KEYWORD_REQUIRED |
SAP Sybase Error Number | 2602 |
SQL State | 42WA0 |
SQL Code | -938L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | The common table expressions for a recursive query must be defined using a WITH RECURSIVE clause. |
Error 939 | "Invalid setting for HTTP option '%1'" |
---|---|
Constant | INVALID_HTTP_OPTION_SETTING |
SAP Sybase Error Number | 2603 |
SQL State | 42W83 |
SQL Code | -939L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | Name of the invalid HTTP option. |
Probable Cause | You supplied an invalid value for an HTTP option. Some options allow only numeric values, while other options allow only the values On and Off. |
Error 940 | "Invalid setting for HTTP header '%1'" |
---|---|
Constant | INVALID_HTTP_HEADER_SETTING |
SAP Sybase Error Number | 2604 |
SQL State | 42W84 |
SQL Code | -940L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | Name of the invalid HTTP header. |
Probable Cause | You supplied an invalid value for an HTTP header. |
Error 941 | "jConnect does not support encryption" |
---|---|
Constant | NO_ENCRYPTION_FOR_JCONNECT |
SAP Sybase Error Number | 2605 |
SQL State | 08W69 |
SQL Code | -941L |
ODBC 2 State | 08004 |
ODBC 3 State | 08004 |
Severity Code | |
Probable Cause | You supplied an encryption type for a connection using jConnect. jConnect does not support encryption. |
Error 942 | "A workload capture (%1) is already in progress" |
---|---|
Constant | WORKLOAD_CAPTURE_ALREADY_EXISTS |
SAP Sybase Error Number | 2606 |
SQL State | WW029 |
SQL Code | -942L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | The name of the workload capture that is already in progress. |
Probable Cause | You have tried to initiate a workload capture when one is already in progress. You need to wait for the other capture to complete. |
Error 943 | "No workload capture currently exists" |
---|---|
Constant | WORKLOAD_CAPTURE_DOES_NOT_EXIST |
SAP Sybase Error Number | 2607 |
SQL State | WW030 |
SQL Code | -943L |
ODBC 2 State | 42000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | You have tried to stop, pause, resume, or get the status of a workload capture, but no workload captures exist. |
Error 944 | "Too many expressions in GROUP BY list for ROLLUP, CUBE, or GROUPING SETS operation" |
---|---|
Constant | TOO_MANY_GROUPING_EXPRESSIONS |
SAP Sybase Error Number | 2608 |
SQL State | 42WA1 |
SQL Code | -944L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Probable Cause | You specified too many expressions in the GROUP BY list for the requested ROLLUP, CUBE, or GROUPING SETS operation. The current environment where SQL Anywhere is executing cannot support this number of expressions in the GROUP BY list for the requested operation. |
Error 945 | "Recursive column %1: conversion from '%2' to '%3' loses precision" |
---|---|
Constant | BAD_RECURSIVE_COLUMN_CONVERSION |
SAP Sybase Error Number | 2609 |
SQL State | 42WA2 |
SQL Code | -945L |
ODBC 2 State | 37000 |
ODBC 3 State | 42000 |
Severity Code | |
Parameter 1 | Column number of the recursive subquery. |
Parameter 2 | Type converted from. |
Parameter 3 | Type converted to. |
Probable Cause | Every column in the recursive subquery must be convertible to the type of the corresponding column in the initial subquery without loss of precision. Try casting the column in the initial subquery to an appropriate type. |