Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
| Error 1005028 | "Syntax error - %2. %1" |
|---|---|
Constant | EMSG_SYNTAX_ERROR |
SAP Sybase Error Number | 21092 |
SQL State | QTA28 |
SQL Code | -1005028L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | the details of syntax error |
Probable Cause | No additional information available. |
| Error 1005029 | "You cannot SELECT from a join virtual table. (%2) %1" |
|---|---|
Constant | EMSG_CANNOT_SELECT_FROM_JVT |
SAP Sybase Error Number | 21143 |
SQL State | QTA29 |
SQL Code | -1005029L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | the details of the syntax error |
Probable Cause | No additional information available. |
| Error 1005030 | "Query has an ambiguous table reference between prepare and open cursor (%2). %1" |
|---|---|
Constant | EMSG_INCONSISTENT_TABLES |
SAP Sybase Error Number | 21145 |
SQL State | QTA30 |
SQL Code | -1005030L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | table name |
Probable Cause | SA allows a base and temp table to both have the same table name. In some places, such as when a temp table is created in a stored procedure between the describe and open, IQ can find the base table in the describe and the temp table in the open, giving inconsistent results. |
| Error 1005031 | "Illegal PARTITION BY item %2, %1" |
|---|---|
Constant | EMSG_BAD_PARTITIONBY_ITEM |
SAP Sybase Error Number | 21217 |
SQL State | QTA31 |
SQL Code | -1005031L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | column name or ordinal number |
Probable Cause | MARKNEW The specificied column name or ordinal number is not present within the select list. |
| Error 1005032 | "Conflicting partitioning requirements were detected in UDF '%2' and SQL '%3', %1" |
|---|---|
Constant | EMSG_PARTITIONBY_SPECS_CONFLICT |
SAP Sybase Error Number | 21218 |
SQL State | QTA32 |
SQL Code | -1005032L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | specification described by the UDF |
Parameter 3 | specification contained within SQL select |
Probable Cause | MARKNEW The partition by specification described by the UDF and contained within the SQL select conflict. |
| Error 1005033 | "Conflicting ordering requirements were detected: %2, %1" |
|---|---|
Constant | EMSG_ORDERBY_SPECS_CONFLICT |
SAP Sybase Error Number | 21219 |
SQL State | QTA33 |
SQL Code | -1005033L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | conflict message |
Probable Cause | MARKNEW The order by specification described by the UDF and contained within the SQL select conflict. |
| Error 1005034 | "column is not present in the projection list, %1" |
|---|---|
Constant | EMSG_COLUMN_NOT_PRESENT_IN_PROJECTION_LIST |
SAP Sybase Error Number | 21220 |
SQL State | QTA34 |
SQL Code | -1005034L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available.. |
| Error 1006000 | "IQ Internal error. Please report this to Sybase IQ support. %1" |
|---|---|
Constant | EMSG_PROGERROR |
SAP Sybase Error Number | 20238 |
SQL State | QBA00 |
SQL Code | -1006000L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
| Error 1006001 | "IQ Internal error. Please report this to Sybase IQ support. %2 %1" |
|---|---|
Constant | EMSG_PROGERROR2 |
SAP Sybase Error Number | 20239 |
SQL State | QBA01 |
SQL Code | -1006001L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Probable Cause | No additional information available. |
| Error 1006002 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %1" |
|---|---|
Constant | EMSG_PROGERROR3 |
SAP Sybase Error Number | 20240 |
SQL State | QBA02 |
SQL Code | -1006002L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Probable Cause | No additional information available. |
| Error 1006003 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %1" |
|---|---|
Constant | EMSG_PROGERROR4 |
SAP Sybase Error Number | 20241 |
SQL State | QBA03 |
SQL Code | -1006003L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Probable Cause | No additional information available. |
| Error 1006004 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %5 %1" |
|---|---|
Constant | EMSG_PROGERROR5 |
SAP Sybase Error Number | 20242 |
SQL State | QBA04 |
SQL Code | -1006004L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Parameter 5 | explanation for arg %5 delete if no %5 |
Probable Cause | No additional information available. |
| Error 1006005 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %5 %6 %1" |
|---|---|
Constant | EMSG_PROGERROR6 |
SAP Sybase Error Number | 20243 |
SQL State | QBA05 |
SQL Code | -1006005L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Parameter 5 | explanation for arg %5 delete if no %5 |
Parameter 6 | explanation for arg %6 delete if no %6 |
Probable Cause | No additional information available. |
| Error 1006006 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %5 %6 %7 %1" |
|---|---|
Constant | EMSG_PROGERROR7 |
SAP Sybase Error Number | 20244 |
SQL State | QBA06 |
SQL Code | -1006006L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Parameter 5 | explanation for arg %5 delete if no %5 |
Parameter 6 | explanation for arg %6 delete if no %6 |
Parameter 7 | explanation for arg %7 delete if no %7 |
Probable Cause | No additional information available. |
| Error 1006007 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %5 %6 %7 %8 %1" |
|---|---|
Constant | EMSG_PROGERROR8 |
SAP Sybase Error Number | 20245 |
SQL State | QBA07 |
SQL Code | -1006007L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Parameter 5 | explanation for arg %5 delete if no %5 |
Parameter 6 | explanation for arg %6 delete if no %6 |
Parameter 7 | explanation for arg %7 delete if no %7 |
Parameter 8 | explanation for arg %8 delete if no %8 |
Probable Cause | No additional information available. |
| Error 1006008 | "IQ Internal error. Please report this to Sybase IQ support. %2 %3 %4 %5 %6 %7 %8 %9 %1" |
|---|---|
Constant | EMSG_PROGERROR9 |
SAP Sybase Error Number | 20246 |
SQL State | QBA08 |
SQL Code | -1006008L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Parameter 3 | explanation for arg %3 delete if no %3 |
Parameter 4 | explanation for arg %4 delete if no %4 |
Parameter 5 | explanation for arg %5 delete if no %5 |
Parameter 6 | explanation for arg %6 delete if no %6 |
Parameter 7 | explanation for arg %7 delete if no %7 |
Parameter 8 | explanation for arg %8 delete if no %8 |
Parameter 9 | explanation for arg %9 delete if no %9 |
Probable Cause | No additional information available. |
| Error 1006009 | "Exception Stack Full %1" |
|---|---|
Constant | EMSG_ERRORSTACKFULL |
SAP Sybase Error Number | 20247 |
SQL State | QBA09 |
SQL Code | -1006009L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
| Error 1006010 | "No TRY Found %1" |
|---|---|
Constant | EMSG_ERRORNOTRYFOUND |
SAP Sybase Error Number | 20248 |
SQL State | QBA10 |
SQL Code | -1006010L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
| Error 1006011 | "No Exception object found" |
|---|---|
Constant | EMSG_ERRORTHROWNOEXCEPT |
SAP Sybase Error Number | 20249 |
SQL State | QBA11 |
SQL Code | -1006011L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1006012 | "No Top Of Stack Set %1" |
|---|---|
Constant | EMSG_ERRORNOTOPOFSTACK |
SAP Sybase Error Number | 20250 |
SQL State | QBA12 |
SQL Code | -1006012L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |