Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
Error 1000326 | "%2 of Coordinator node cannot be changed. %1" |
---|---|
Constant | EMSG_MPX_COORD_ATTR_CANNOT_CHANGE |
SAP Sybase Error Number | 21195 |
SQL State | QDD05 |
SQL Code | -1000326L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Could be either ROLE or STATUS |
Probable Cause | ROLE or STATUS of Coordinator node cannot be changed. |
Error 1000327 | "Failover node cannot be Excluded. %1" |
---|---|
Constant | EMSG_MPX_CANNOT_EXCLUDE_FAILOVER |
SAP Sybase Error Number | 21196 |
SQL State | QDD06 |
SQL Code | -1000327L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | A designated failover node cannot be Excluded. |
Error 1000328 | "%2 node cannot be dropped. %1" |
---|---|
Constant | EMSG_MPX_CANNOT_BE_DROPPED |
SAP Sybase Error Number | 21197 |
SQL State | QDD07 |
SQL Code | -1000328L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | Could be either COORDINATOR or FAILOVER |
Probable Cause | A Coordinator or a Failover node cannot be dropped from the multiplex configuration. |
Error 1000329 | "The move target %2 is already in the specified dbspace. %1" |
---|---|
Constant | EMSG_MOVE_TARGET_DBSPACE_UNCHANGED |
SAP Sybase Error Number | 21198 |
SQL State | QDD02 |
SQL Code | -1000329L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Target name to be moved. |
Parameter 2 | Location of the exception. |
Probable Cause | The move target for alter table or alter index is already in the specified dbspace. |
Error 1000330 | "Default value %2 cannot be used as a LOAD default value. %1" |
---|---|
Constant | EMSG_INVALIDLOADDEFAULTVALUE |
SAP Sybase Error Number | 21199 |
SQL State | QDD17 |
SQL Code | -1000330L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of exception |
Parameter 2 | load default value |
Probable Cause | Specified default value cannot be used as a LOAD default value. |
Error 1000331 | "The requested FP style (%1) for %2 cannot be rebuilt. It will be rebuilt as %3." |
---|---|
Constant | EMSG_CANNOT_REBUILD_FP |
SAP Sybase Error Number | 21204 |
SQL State | QDD19 |
SQL Code | -1000331L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Requested FP style |
Parameter 2 | FP index |
Parameter 3 | Actual Rebuilt FP style |
Probable Cause | The requested FP style cannot be rebuilt. Increase main cache or set FP_Lookup_Size_PPM to a higher percentage for 3-byte FP. |
Error 1000332 | "Odd length of binary data value detected on column %2 - %1" |
---|---|
Constant | EMSG_ODDNUMBER_NIBBLES |
SAP Sybase Error Number | 21206 |
SQL State | QDD20 |
SQL Code | -1000332L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | the column where the error occurs |
Probable Cause | When loading hexadicimal data into BLOB, the total number of nibbles has to be an even number. If an odd number is detected, the load engine will rollback. This restriction does not apply to binary and varbinary data type. |
Error 1000333 | "DBCC IQ_SHARED_TEMP dbspace target not allowed with other targets. %1" |
---|---|
Constant | EMSG_DBCC_SHTEMP_MODE |
SAP Sybase Error Number | 22021 |
SQL State | QDD22 |
SQL Code | -1000333L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Probable Cause | When specifying the IQ_SHARED_TEMP dbspace as a DBCC mode target, no other targets may be specified. |
Error 1000334 | "Unsupported DBCC dbspace target \"%2\". %1" |
---|---|
Constant | EMSG_DBCC_UNSUPPORTED_DBSPACE |
SAP Sybase Error Number | 22022 |
SQL State | QDD23 |
SQL Code | -1000334L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Location of the exception. |
Parameter 2 | Dbspace name. |
Probable Cause | DBCC Does not support checking modes on this dbspace target. |
Error 1000335 | "Cannot add writer when coordinator started with -iqmpx_nowr %1" |
---|---|
Constant | EMSG_MPX_NO_WRITER_ALLOWED |
SAP Sybase Error Number | 21214 |
SQL State | QDD25 |
SQL Code | -1000335L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Please restart coordinator without -iqmpx_nowr switch to add writer node |
Error 1000336 | "Cannot convert to writer when coordinator started with -iqmpx_nowr %1" |
---|---|
Constant | EMSG_MPX_ROLE_CHANGE_DENIED_NOWR |
SAP Sybase Error Number | 21215 |
SQL State | QDD26 |
SQL Code | -1000336L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | Please restart coordinator without -iqmpx_nowr switch to change role to writer |
Error 1000337 | " Number of columns in Hash Partition key cannot be greater than %2. %1" |
---|---|
Constant | EMSG_CAT_NUM_HASH_PARTITION_KEY_COL_EXCEEDED |
SAP Sybase Error Number | 21216 |
SQL State | QDD27 |
SQL Code | -1000337L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of exception |
Parameter 2 | Maximum number of allowed columns in hash key |
Probable Cause | Hash partition key columns cannot be greater than the allowed value. |
Error 1001000 | "DFE Sum or Average overflow - try CASTing the argument to a larger datatype. %1" |
---|---|
Constant | EMSG_SUMAVGOVERFLOW |
SAP Sybase Error Number | 20509 |
SQL State | QFA00 |
SQL Code | -1001000L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001001 | "DFE Typechecking error %1" |
---|---|
Constant | EMSG_TCHECKERROR |
SAP Sybase Error Number | 20510 |
SQL State | QFA01 |
SQL Code | -1001001L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001002 | "Feature is not yet implemented %1" |
---|---|
Constant | EMSG_NOTIMPLEMENTED |
SAP Sybase Error Number | 20511 |
SQL State | QFA02 |
SQL Code | -1001002L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001003 | "Internal error: subclass responsibility %1" |
---|---|
Constant | EMSG_SUBCLASSRESPONSIBILITY |
SAP Sybase Error Number | 20512 |
SQL State | QFA03 |
SQL Code | -1001003L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001004 | "Data exception - substring error. %1" |
---|---|
Constant | EMSG_SUBSTRINGERROR |
SAP Sybase Error Number | 20513 |
SQL State | QFA04 |
SQL Code | -1001004L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001005 | "Data exception - string length error. %1" |
---|---|
Constant | EMSG_STRINGLENERROR |
SAP Sybase Error Number | 20514 |
SQL State | QFA05 |
SQL Code | -1001005L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001006 | "Data exception - data type conversion is not possible. %1" |
---|---|
Constant | EMSG_TYPECONVERSION |
SAP Sybase Error Number | 20515 |
SQL State | QFA06 |
SQL Code | -1001006L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |
Error 1001007 | "Data exception - operation resulted in division by zero. %1" |
---|---|
Constant | EMSG_DIVIDEBYZERO |
SAP Sybase Error Number | 20516 |
SQL State | QFA07 |
SQL Code | -1001007L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | No additional information available. |