Messages on this page are sorted by Sybase error code. Locate the appropriate code for a full description of the message.
| Error 1006256 | "Invalid arithmetic construction %2 %1" |
|---|---|
Constant | EMSG_NUMERIC_CONSTRUCTOR |
SAP Sybase Error Number | 20494 |
SQL State | QBC56 |
SQL Code | -1006256L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Probable Cause | No additional information available. |
| Error 1006257 | "Invalid arithmetic conversion %2 %1" |
|---|---|
Constant | EMSG_NUMERIC_CONVERSION |
SAP Sybase Error Number | 20495 |
SQL State | QBC57 |
SQL Code | -1006257L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Probable Cause | No additional information available. |
| Error 1006258 | "Invalid arithmetic operation %2 %1" |
|---|---|
Constant | EMSG_NUMERIC_OPERATOR |
SAP Sybase Error Number | 20496 |
SQL State | QBC58 |
SQL Code | -1006258L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Probable Cause | No additional information available. |
| Error 1006259 | "Invalid arithmetic function arguments %2 %1" |
|---|---|
Constant | EMSG_NUMERIC_FUNCTION |
SAP Sybase Error Number | 20497 |
SQL State | QBC59 |
SQL Code | -1006259L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | explanation for arg %2 delete if no %2 |
Probable Cause | No additional information available. |
| Error 1006260 | " Could not open file: " |
|---|---|
Constant | EMSG_FILEINFO_OPENERR |
SAP Sybase Error Number | 20498 |
SQL State | QBC60 |
SQL Code | -1006260L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1006261 | "\n\n*** File: %s\n\n" |
|---|---|
Constant | EMSG_FILENAME |
SAP Sybase Error Number | 20499 |
SQL State | QBC61 |
SQL Code | -1006261L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1006262 | " This new operator should never be called " |
|---|---|
Constant | EMSG_SHOULDNOTCALLNEW |
SAP Sybase Error Number | 20500 |
SQL State | QBC62 |
SQL Code | -1006262L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1006263 | " This delete operator should never be called " |
|---|---|
Constant | EMSG_SHOULDNOTCALLDELETE |
SAP Sybase Error Number | 20501 |
SQL State | QBC63 |
SQL Code | -1006263L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | No additional information available. |
| Error 1006264 | "Invalid Blocksize %2 less than the Device Sectorsize %3 %4 %1" |
|---|---|
Constant | EMSG_BIO_INVBLKSZFORDEV |
SAP Sybase Error Number | 21072 |
SQL State | QBC64 |
SQL Code | -1006264L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | %2 Invalid block size |
Parameter 3 | %3 Device Sector Size |
Parameter 4 | %4 Name of Raw device |
Probable Cause | No additional information available. |
| Error 1006265 | "Invalid Filename: %2. %1" |
|---|---|
Constant | EMSG_IO_INVALID_FILENAME |
SAP Sybase Error Number | 21093 |
SQL State | QBC65 |
SQL Code | -1006265L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | %2 Invalid filename |
Probable Cause | A bad filename (perhaps zero-length) was specified. |
| Error 1006266 | "Found bad sector on raw device: %1" |
|---|---|
Constant | EMSG_RAWIO_BAD_SECTOR |
SAP Sybase Error Number | 21105 |
SQL State | QBC66 |
SQL Code | -1006266L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | A bad sector was detected on the given raw device. |
| Error 1006267 | "%2 blocks is greater than the partition size of %3 blocks %1" |
|---|---|
Constant | EMSG_BIO_RESIZETOOBIG |
SAP Sybase Error Number | 21119 |
SQL State | QBC67 |
SQL Code | -1006267L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Parameter 2 | user specified size |
Parameter 3 | partition size |
Probable Cause | No additional information available. |
| Error 1006268 | "The current operation has been cancelled: Max_Temp_Space_Per_Connection exceeded" |
|---|---|
Constant | EMSG_ATTN_MAXTEMPSPACE |
SAP Sybase Error Number | 21151 |
SQL State | QBC68 |
SQL Code | -1006268L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | User has exhausted maximum temp dbspace limit for this connection |
| Error 1006269 | "No SYSAM License Available" |
|---|---|
Constant | EMSG_NO_SYSAMLICENSE |
SAP Sybase Error Number | 21161 |
SQL State | QBC69 |
SQL Code | -1006269L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | SYSAM license for the product is either not available or not configured. |
| Error 1006270 | "SYSAM Failure while doing: %1" |
|---|---|
Constant | EMSG_SYLAPI_FAILURE |
SAP Sybase Error Number | 21162 |
SQL State | QBC70 |
SQL Code | -1006270L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | Parameter 1 description |
Probable Cause | SYSAM internal failure. |
| Error 1006271 | "IQ_CORE License has expired" |
|---|---|
Constant | EMSG_IQCORE_EXPIRED |
SAP Sybase Error Number | 21163 |
SQL State | QBC71 |
SQL Code | -1006271L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | SYSAM IQ_CORE license has expired leading to server shutdown |
| Error 1006272 | "IQ Main store cannot be larger than licensed limit" |
|---|---|
Constant | EMSG_IQSTORE_LIMIT |
SAP Sybase Error Number | 21172 |
SQL State | QBC72 |
SQL Code | -1006272L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | SYSAM IQ Main store is larger than the limit specified in product license leading to server shutdown |
| Error 1006273 | "License limit for dbspaces reached. Cannot create new dbspace" |
|---|---|
Constant | EMSG_VLDBMGMT_LIMIT |
SAP Sybase Error Number | 21203 |
SQL State | QBC73 |
SQL Code | -1006273L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | SYSAM Number of IQ Main DBSpaces higher than the licensed limit |
| Error 1006274 | "Transaction cannot continue due to unrecoverable INC failure. Roll back current transaction. %1" |
|---|---|
Constant | EMSG_INC_FAILURE_ROLLBACKTXN |
SAP Sybase Error Number | 22036 |
SQL State | QBC74 |
SQL Code | -1006274L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Parameter 1 | location of the exception |
Probable Cause | The underlying INC for current transaction has failed to connect to coordinator in Mpx_Liveness_Timeout seconds or coordinator side state of transaction is unknown. |
| Error 1008000 | "Users are not allowed to create an FP index. FP indexes are created automatically when the table is created." |
|---|---|
Constant | EMSG_IQ_NOCREATEFP |
SAP Sybase Error Number | 20596 |
SQL State | QNA00 |
SQL Code | -1008000L |
ODBC 2 State | ERROR |
ODBC 3 State | ERROR |
Severity Code | |
Probable Cause | Users are not able to create Fast Projection indexes on columns. They are created automatically when the table is created. |