Error messages

The following are common error messages you might receive.

Error message 18805:
```
Warning: Server '%1!' is configured for ASE HA services. The network name
```
```
in its SYB_HACMP entry does not point to the local server. If this is due
```
```
to an earlier failed cluster command, refer to the System Administration
```
```
Guide.
```
This error occurs when the SYB_HACMP network name is set to another server’s network name. Use sp_addserver to set the srvnetname of SYB_HACMP to the local server’s network name. During normal companion mode, the svrnetname for SYB_HACMP always points to the remote companion’s network name, and should never be changed.

Error message 18769:

The HA cluster is currently in use for other cluster operations. Retry

the command later. If the problem persists, it may be due to an earlier

failed cluster command; check the System Administration Guide (Error

%1!).

All cluster operations receive a cluster-wide lock and release the lock when they are done. This error occurs when you perform a cluster operation before the previous cluster operation releases the cluster-wide lock. For information about releasing a cluster-wide lock, see “Cluster locks in a high availability node”.

Error message 18836:
```
Configuration operation '%1!' can not proceed due to Quorum AdvisoryCheck
```
```
failure. Please run 'do_advisory' command to find the incompatible attribute and fix it
```
sp_companion checks a series of attributes to confirm the compatibility between the companion servers. One of your companion servers has attribute settings that are not compatible with the other companion server. Run do_advisory for a list of the problem attributes. See Chapter 6, “Running do_advisory”.