Table C-4 lists LTMCFG messages.
Message |
Description |
User action recommended |
---|---|---|
04001 LTM Configuration started. |
Information message. |
None. |
04002 Logging messages in file ‘%0s’. |
Information message. |
None. |
04003 Reading ‘%0s’ for configuration information. |
Information message. |
None. |
04004 Configuration %0s was specified as %1s. |
Information message. |
None. |
04005 LTM Configuration failed. |
Information message. |
Correct configuration errors. |
04006 LTM Configuration successful. |
Information message. |
None. |
04008 Parm ‘%0s’ must be length 8 or less. |
Information message. |
Correct parm in error. |
04009 Parm ‘%0s’ must be specified. |
Information message. |
Specify parm listed in message. |
04010 Syntax error for parm ‘%0s’. |
Information message. |
Fix syntax error on parm. |
04011 Not numeric error on parm ‘%0s’. |
Information message. |
Fix non-numeric error on parm. |
04012 Value must be Y or N for parm ‘%0s’. |
Information message. |
Set value of parm to Y or N. |
04013 Invalid IP address for parm ‘%0s’. |
Information message. |
Change parm to valid IP address. |
04014 RSSD_server not specified. Required if Use_repdef=Y. |
Information message. |
Specify RSSD_server. |
04015 RSSD_user not specified. Required if Use_repdef=Y. |
Information message. |
Specify RSSD_user. |
04016 RSSD_pw not specified. Required if Use_repdef=Y. |
Information message. |
Specify RSSD_pw. |
04017 RSSD_database not specified. Required if Use_repdef=Y. |
Information message. |
Specify RSSD_database. |
04018 When using Use_repdef=Y, Minimal_cols must be set to Y. |
Information message. |
Set Minimal_cols to Y or set Use_repdef to N. |
04019 Invalid value specified for Use_repdef. Specify Y or N. |
Information message. |
Set Use_repdef to Y or N. |
04020 RSSD IP Address invalid or missing, cannot set host properties. |
Information message. |
Enter a valid IP address for RSSD_IP _address. |
04021 RSSD Port invalid or missing, cannot set host properties. |
Information message. |
Enter a valid port number for RSSD_port. |
04022 Communications Protocol ‘%0s’ is invalid. Use IBMTCP. |
Information message. |
Specify parm as IBMTCP. |
04023 Invalid value specified for Suppress_col_names. Specify Y or N. |
Information message. |
Set Suppress_col_names to Y or N. |
04024 Invalid value specified for Support_DB2_comp_rec. Specify Y or N. |
Information message. |
Set Support_DB2_comp_rec to Y or N. |
04025 Maximum_connect_retries is invalid. Valid values are 0-9999. |
Information message. |
Enter a value for Maximum_connect_retries between 0 and 9999. |
04026 Invalid value specified for Minimum_year. Valid values are four digits, 0000 - 9999. |
Information message. |
Enter a value for Minimum_year between 0000 and 9999. |
04027 Suppress_col_names=Y is not valid with Use_repdef=N. |
Information message. |
Either change Suppress_col_names to N or change Use_repdef to Y. |
04028 RS Port invalid or missing, cannot set host properties. |
Information message. |
Enter a valid number for RS_port. |
04029 RS IP Address is invalid or missing, cannot set host properties. |
Information message. |
Enter a valid IP address for RS_IPaddress. |
04030 TCPIP Address Name invalid or missing, cannot set host properties. |
Information message. |
Enter a valid TCPIP address space name. |
04031 The data sharing option is MULTI, so the data sharing member will be ignored. |
Information message. |
Datasharingmember parm ignored. |
04032 An RS Host and an IP address were specified, host will be used. |
Information message. |
RS_host will be used to connect to Rep Server. |
04033 An RSSD Host and an IP address were specified, host will be used. |
Information message. |
RSSD_host will be used to connect to Rep Server. |
04034 CCSID must be less than 65533. |
CCSID value is out of range. |
Correct CCSID value. |
04035 Datasharingoption must be None, Single, or Multi. |
Information message. |
Change Datasharingoption to None, Single, or Multi. |
04036 Graphictype must be char or bin. |
Information message. |
Enter char or bin for Graphictype. |
04037 Invalid Trace value. |
Information message. |
Re-enter or modify the trace command to specify the correct value. |