Server Error Messages 10800 - 10899


 Invalid type configured for cache %s. Cache type can be one of default OR mixed OR log along with HK ignore but NOT just HK ignore alone.
 Configuration Error: Configuration Parameter `%s' cannot be changed to 1 when parameter `evaluated configuration' is set to 1.
 Configuration Error: Cannot set configuration parameter `evaluated configuration' to 1. Other Security related configuration parameters need to be set properly before this parameter can be changed to 1. Please contact a user with SSO role for help.
 The value of `max parallel degree' (`%d') cannot be less than the value of `max scan parallel degree' (`%d').
 Use sp_configure to lower the value of `max scan parallel degree' or raise the value of `max parallel degree'.
 The value of `number of worker processes' (`%d') cannot be less than the value of `max parallel degree' (`%d').
 Use sp_configure to lower the value of `max parallel degree' or raise the value of `number of worker processes'.
 Auditing: Fatal erorr - could not truncate the audit table `%.*s'. This is an internal error.
 Audit table cannot be changed because the log device in the sybsecurity database is full.
 Auditing: Fatal error - could not get the name of the audit table with the object id `%d' to truncate it. This is an internal error.
The lock hashtable size must be a power of 2. You have specified a size of %d, which is not a power of 2. The next highest power of 2, %d, will be used instead. 
 The value of the `dump on conditions' configuration parameter must be either 0 or 1.
 Configuration Error: Unknown cache replacement policy `%s' defined for cache `%s'.
 Warning: the value provided for `parallel_degree' (`%d') was less than the value of `scan_parallel_degree' (`%d'). The value of `scan_parallel_degree' has been adjusted to `%d'.
 The value of `scan_parallel_degree' (`%d') cannot be larger than the value of `scan_parallel_degree' set by a calling procedure. The value `%d' is used.
 The configuration option `%s' has been changed by `%s' from `%s' to `%s'.
 The configuration option `%s' requires a character string.
 The string size of the configuration option `%s' must be less than `%d'.
 The specified memory, `%ldK', is not big enough to configure the configuration parameter, `%s', to a valid value.
 Illegal value `%s' specified for configuration option `%s'. The legal values are between `%ld' and `%ld'.
 Configuration parameter, `%s', will consume more than %ld bytes of memory if configured at %ld.
The value of the ’max memory’ parameter ’%ld’ is not high enough to set the other parameter values for the current SQL Server configuration.
Warning: the value of the configuration parameter 'max scan parallel degree' has been set to %d. For optimal performance, a value no larger than 4 is recommended.
Consider increasing the value of configuration parameter ’max memory’ or decreasing the value of configuration parameters causing significant memory consumption, such as ’number of user connections’.
Adaptive Server cannot estimate the memory requirement. See the System Administration Guide for information about Adaptive Server memory requirement.
Configuration parameter '%s' can be only 0 or 1.
Configured 'number of cache partitions' ('%d') is illegal in cache '%s'. The value must be a power of '2' and between '%d' and '%d'. 
Each partitioned pool must be at least 256P. With the ’%d’ partitions we cannot configure this value for buffer pool (%dk) in cache (%s). Please configure a bigger pool or reduce the number of cache partitions.
Cannot disable CIS Services as transaction coordination requires CIS Services to be enabled. Please disable transaction coordination first. 
 Configuration parameter ’%s’ can not be enabled without license ’%s’.
The license allows maximum %d engines only.
Cannot ’enable ha’ as HA services require transaction coordination. Please enable transaction coordination first. 
Cannot ’enable ha’ as HA services require Omni services . Please enable Omni services first. 
Server is currently HA cluster configured. ASE HA Services can not be disabled. 
The User Log Cache has been configured too small. The minimum size of a user log cache is the max page size (in bytes) the server is using, which is %d Kilotyes for the current server. 
Memory grow failed for pool %s. Error code %d. This is possibly due to memory fragmentation. This pool may grow on demand. Please increase ’max memory’ and retry the configuration.
The value of parameter ’max memory’ ’%ld’ cannot be less than the ’total logical memory’ size ’%ld’. Please reconfigure ’max memory’ to be greater than or equal to the total logical memory required.
The value specified for configuration option ’%s’ ’%d’ may not be greater than the value ’%d’ specified for configuration option ’%s’.
The value specified for configuration option ’number of engines at startup’ ’%d’ may not be greater than the number of available CPUs ’%d’.
Cannot enable ’use ssl client cert auth’ configuration parameter.
The maximum number of memory maps ’%d’ has been reached for ’%s’ pool. You will have to reboot the server to reconfigure ’%s’. You may be able to reconfigure other configuration parameters.
Overflow error: The ’total logical memory’ ’%d’ (2k pages) required for the configuration exceeds the maximum size of memory available on a ’%d’ bit platform: ’%lu’ bytes. Please reduce the configuration values that are consuming large amounts of memory.
The Adaptive Server Enterprise Small Business Edition does not allow you to set this configuration parameter to a value higher than %d.

Number	Severity	Text and Explanation
10801	16	Invalid type configured for cache %s. Cache type can be one of default OR mixed OR log along with HK ignore but NOT just HK ignore alone. Explanation: There may be possible corruption in a database or a database object. Take any corrective action indicated by the message. Consult the Adaptive Server System Administration Guide and the Troubleshooting Guide.
10802	16	Configuration Error: Configuration Parameter `%s' cannot be changed to 1 when parameter `evaluated configuration' is set to 1. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10803	16	Configuration Error: Cannot set configuration parameter `evaluated configuration' to 1. Other Security related configuration parameters need to be set properly before this parameter can be changed to 1. Please contact a user with SSO role for help. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10807	16	The value of `max parallel degree' (`%d') cannot be less than the value of `max scan parallel degree' (`%d'). Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10808	10	Use sp_configure to lower the value of `max scan parallel degree' or raise the value of `max parallel degree'. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10809	16	The value of `number of worker processes' (`%d') cannot be less than the value of `max parallel degree' (`%d'). Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10810	16	Use sp_configure to lower the value of `max parallel degree' or raise the value of `number of worker processes'. Explanation: Adaptive Server could not perform the requested action. Contact your System Administrator.
10812	20	Auditing: Fatal erorr - could not truncate the audit table `%.s'. This is an internal error. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
10813	16	Audit table cannot be changed because the log device in the sybsecurity database is full. Explanation: SSO is trying to change the current audit table number but the log for sybsecurity is full.
10814	20	Auditing: Fatal error - could not get the name of the audit table with the object id `%d' to truncate it. This is an internal error. Explanation: Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
10815	16	The lock hashtable size must be a power of 2. You have specified a size of %d, which is not a power of 2. The next highest power of 2, %d, will be used instead. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10816	16	The value of the `dump on conditions' configuration parameter must be either 0 or 1. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10817	16	Configuration Error: Unknown cache replacement policy `%s' defined for cache `%s'. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10818	10	Warning: the value provided for `parallel_degree' (`%d') was less than the value of `scan_parallel_degree' (`%d'). The value of `scan_parallel_degree' has been adjusted to `%d'. Explanation: This is an informational message. Unless otherwise specified, no action is required. Contact your System Administrator about any warning issued in the message.
10819	10	The value of `scan_parallel_degree' (`%d') cannot be larger than the value of `scan_parallel_degree' set by a calling procedure. The value `%d' is used. Explanation: This is an informational message. Unless otherwise specified, no action is required. Contact your System Administrator about any warning issued in the message.
10820	10	The configuration option `%s' has been changed by `%s' from `%s' to `%s'. Explanation: This is an informational message. Unless otherwise specified, no action is required. Contact your System Administrator about any warning issued in the message.
10821	16	The configuration option `%s' requires a character string. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10822	16	The string size of the configuration option `%s' must be less than `%d'. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10823	16	The specified memory, `%ldK', is not big enough to configure the configuration parameter, `%s', to a valid value. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10824	16	Illegal value `%s' specified for configuration option `%s'. The legal values are between `%ld' and `%ld'. Explanation: You tried to read in a configuration file which contains an alphanumeric value for an integer configuration parameter. Correct the file entries.
10825	16	Configuration parameter, `%s', will consume more than %ld bytes of memory if configured at %ld. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10826	16	The value of the ’max memory’ parameter ’%ld’ is not high enough to set the other parameter values for the current SQL Server configuration. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10827	10	Warning: the value of the configuration parameter 'max scan parallel degree' has been set to %d. For optimal performance, a value no larger than 4 is recommended. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10828	10	Consider increasing the value of configuration parameter ’max memory’ or decreasing the value of configuration parameters causing significant memory consumption, such as ’number of user connections’. Explanation: Refer to “Configuring Memory” in the System Administration Guide for information on how Adaptive Server uses memory.
10829	16	Adaptive Server cannot estimate the memory requirement. See the System Administration Guide for information about Adaptive Server memory requirement. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10830	16	Configuration parameter '%s' can be only 0 or 1. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10831	16	Configured 'number of cache partitions' ('%d') is illegal in cache '%s'. The value must be a power of '2' and between '%d' and '%d'. Explanation:
10832	16	Each partitioned pool must be at least 256P. With the ’%d’ partitions we cannot configure this value for buffer pool (%dk) in cache (%s). Please configure a bigger pool or reduce the number of cache partitions. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10833	16	Cannot disable CIS Services as transaction coordination requires CIS Services to be enabled. Please disable transaction coordination first. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10834	16	Configuration parameter ’%s’ can not be enabled without license ’%s’. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10835	16	The license allows maximum %d engines only. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10836	16	Cannot ’enable ha’ as HA services require transaction coordination. Please enable transaction coordination first. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10837	16	Cannot ’enable ha’ as HA services require Omni services . Please enable Omni services first. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10838	16	Server is currently HA cluster configured. ASE HA Services can not be disabled. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10839	16	The User Log Cache has been configured too small. The minimum size of a user log cache is the max page size (in bytes) the server is using, which is %d Kilotyes for the current server. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10840	16	Memory grow failed for pool %s. Error code %d. This is possibly due to memory fragmentation. This pool may grow on demand. Please increase ’max memory’ and retry the configuration. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10841	16	The value of parameter ’max memory’ ’%ld’ cannot be less than the ’total logical memory’ size ’%ld’. Please reconfigure ’max memory’ to be greater than or equal to the total logical memory required. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10842	16	The value specified for configuration option ’%s’ ’%d’ may not be greater than the value ’%d’ specified for configuration option ’%s’. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10843	16	The value specified for configuration option ’number of engines at startup’ ’%d’ may not be greater than the number of available CPUs ’%d’. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10844	16	Cannot enable ’use ssl client cert auth’ configuration parameter. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10845	16	The maximum number of memory maps ’%d’ has been reached for ’%s’ pool. You will have to reboot the server to reconfigure ’%s’. You may be able to reconfigure other configuration parameters. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
10846	16	Overflow error: The ’total logical memory’ ’%d’ (2k pages) required for the configuration exceeds the maximum size of memory available on a ’%d’ bit platform: ’%lu’ bytes. Please reduce the configuration values that are consuming large amounts of memory. Explanation: Take corrective action indicated by message. Check the System Administration Guide for discussion of how Adaptive Server uses memory.
10847	16	The Adaptive Server Enterprise Small Business Edition does not allow you to set this configuration parameter to a value higher than %d. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions.