Server Error Messages 9200 - 9299


%S_REPAGNT: Could not map OAM Page (%d) to object id, current marker (%d, %d).  
%S_REPAGNT: Nested replicated stored procedure detected. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = %d, %d) 
%S_REPAGNT: Encountered an End Transaction that was not in abort state while locating after image for Delete at (%d, %d), transaction = (%d, %d). 
%S_REPAGNT: Could not locate schema for object with id = (%d), current marker (%d , %d). 
%S_REPAGNT: A replicated End Stored Procedure Execution log record was found with out a Begin. Transaction log may be corrupt. Please contact SYBASE Technical Support. objid = (%d), current marker = (%d, %d) 
%S_REPAGNT: Error initializing the Rep Agent. Could not set affinity to engine (% d). 
%S_REPAGNT: Could not re-read XCMDTEXT log record at (%d, %d), current marker (%d , %d). 
%S_REPAGNT: Update detected within a subscribable function. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)). 
%S_REPAGNT: Missing datarow in TEXT/IMAGE insert log record. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)). 
%S_REPAGNT: Fatal error from CT-Lib. (CT-Lib command = %s, return status = %d).  
%S_REPAGNT: Received the following error message from the Replication Server: Msg  %ld. %.*s. 
%S_REPAGNT: Received the following communications error message: Msg %s: %.*s.  
%S_REPAGNT: The version of this Rep Agent, is not supported by the Replication Server specified. After fixing this problem, restart the Rep Agent for this database. (Rep Agent version = %d, Rep Server version = %d, Rep Server = %.*s). 
%S_REPAGNT: Failed to connect to Replication Server. Please check the Replication  Server, username, and password specified to sp_config_rep_agent. RepSvr = %.*s, user = %. *s). 
%S_REPAGNT: The Secondary Truncation Point is not valid. Please make sure that the Secondary Truncation Point is valid, and then restart the Rep Agent Thread for this data base.  
%S_REPAGNT: The Rep Agent Thread will retry the connection to the Replication Server every %d second(s). (RepSvr = %.*s). 
%S_REPAGNT: Trace log file set to `%s'.  
Database %S_DBID has not been enabled yet for an integrated Rep Agent Thread. Run  sp_enable_rep_agent() to enable the database. 
%S_REPAGNT: Internal coding error.  
%S_REPAGNT: The Rep Agent Thread context for database %S_DBID has already been reserved by another session.  
Parameter count/type mismatch. Please check the number and types of the parameters passed to the builtin function, '%.*s'. 
You must be SA, DBO, or have REPLICATION role to execute the builtin function, '% .*s'. Please check your current roles. 
Unknown operation, '%.*s', specified to builtin function rep_agent_admin(). Please check parameter spelling and placement. 
Unknown category, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement. 
Unknown property, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement. 
Database %S_DBID has already been enabled to use a Rep Agent thread.  
%S_REPAGNT. Could not allocate memory to spawn Rep Agent thread. (size=%d)  
%S_REPAGNT. Could not spawn Rep Agent Thread.  
%S_REPAGNT. Could not change to database, %S_DBID.  
The Rep Agent Thread for database, %S_DBID, is not running. Please retry this command after starting the Rep Agent Thread for this database. 
%S_REPAGNT. The Connect Dataserver name was not specified via 'sp_start_rep_agent ', nor was it found in sysattributes, or sysservers. Make sure that you have done a 'sp_ad dserver <svr>, local'.
%S_REPAGNT. The Connect Database name was not found in sysattributes, or sysdatabases.
%S_REPAGNT. Could not allocate %d bytes from the procedure cache. Please retry the last operation when more memory is available, or re-configure the server with a larger procedure cache.
%S_REPAGNT. Could not start Rep Agent Thread.  
Could not allocate memory for gettrunc. Please retry gettrunc() later when more memory is available, or re-configure the server with a larger procedure cache. 
Unknown dbid '%d' specified. Please check the dbid specified. 
%S_REPAGNT. The row for %.*s could not be found in sysattributes. Please check the configuration properties for this database with 'sp_config_rep_agent ' or 'sp_help_rep_agent'.
Settrunc() is not permitted when a Rep Agent Thread is currently running on the database. 
%S_REPAGNT: Could not allocate a Procedure Cache for the Rep Agent Thread. Try restarting the Rep Agent Thread after freeing up, or allocating a larger Procedure Cache. 
%S_REPAGNT: Could not allocate an alarm. Try restarting this Rep Agent Thread after freeing up some alarms, or restart the server with more alarms allocated. 
%S_REPAGNT: Failure initializing the Rep Agent Context.  
%S_REPAGNT: Underflow or overflow of state stack occurred.  
%S_REPAGNT: Interface error with the Replication Server. The Rep Agent may not be  compatible with the Replication Server. 
Failure during update/insert/delete from sysattributes.  
Failed to reserve context in shared mode.  
%S_REPAGNT Failed to open trace file, '%.*s'. Trace messages will go to stdout of  the server. 
%S_REPAGNT Write to trace file, '%.*s', failed  
Internal coding error in builtin function, '%.*s'.  
Failed to get secondary truncation point.  
%S_REPAGNT: Could not locate schema version for object id '%d' in the transaction log. 
%S_REPAGNT: Rewrite of PREPARE log record failed at (%d, %d).  
%S_REPAGNT: Could not read INOOP log record at (%d, %d), current marker (%d, %d).  
%S_REPAGNT: Could not read ROWIMAGE log record at (%d, %d), current marker (%d, % d).  
%S_REPAGNT: Could not re-read EXECBEGIN log record at (%d, %d), current marker (% d, %d).  
%S_REPAGNT: Could not read TEXTINSERT/INOOPTEXT log record at (%d, %d), current marker (%d, %d). 
%S_REPAGNT: This Rep Agent Thread is aborting due to an unrecoverable communications or Replication Server error. 
Failed to start a Rep Agent Thread for the database specified because a Rep Agent Thread is already running for that database. 
%S_REPAGNT: Turning Batch mode on.  
%S_REPAGNT: Turning Batch mode off.  
%S_REPAGNT: Ignoring LTL errors.  
%S_REPAGNT: Error in passthru packet: '%.*s'.  
%S_REPAGNT: A security mechanism was specified, but no security service(s) were specified. Please use 'sp_config_rep_agent' to specify which security service(s) to use when connecting to the Replication Server.
%S_REPAGNT: The security service '%.*s' was specified, but it is not supported by the security mechanism. Please check the security service(s) and/or security mechanism specified to sp_config_rep_agent. (CT-lib error %d).
%S_REPAGNT: Failure initializing the security mechanism '%.*s'. Please check the 'security mechanism' specified to sp_config_rep_agent. (CT-lib error % d).
%S_REPAGNT: Using default security mechanism.
%S_REPAGNT: Failure initializing the default security mechanism. Please check that a security mechanism has been properly configered. (CT-lib error %d)
%S_REPAGNT: Failure specifying the keytab filename. Please check that the keytab file '%.*s', exists and is accessable. (CT-lib error %d).
%S_REPAGNT: Using default keytab file because security mechanism requir es a keytab file, but the no keytab file was specified at server startup.
Cannot disable the RepAgent thread for database %S_DBID, because the RepAgent is still running. Please stop the RepAgent on that database with 'sp_stop _rep_agent' before re-issuing 'sp_config_rep_agent disable'.
%S_REPAGNT: Could not locate the after image for the DELETE log record at (%d, %d).
Error executing the command 'set proxy %.*s'.
%S_REPAGNT: The security mechanism configured requires a keytab file. Check that the a keytab file was specified at server startup, and that 'use security services' has been configured.
%S_REPAGNT: Encountered a feature that cannot be supported by the current Replication Server version. Upgrade the Replication Server version to a higher level, or use sp_config_rep_agent to set the ’skip unsupported features’ option. 
%S_REPAGNT: Connecting to a Replication Server that supports a lower LTL version. Features that are not supported by the lower LTL version may cause the RepAgent to shutdown. Set the ’skip unsupported features’ configuration option to prevent shutdown. 
%S_REPAGNT: Unable to start RepAgent on database %S_DBID, because that database has not been recovered and/or is not online. Please start the RepAgent manually using sp_start_rep_agent when it is ready. 
%S_REPAGNT: The Replication Server LTL version should be at least %d for full support of features. (Replication server LTL version %d, Rep Agent LTL version %d). 
%S_REPAGNT: No free file descriptors available.
%S_REPAGNT: Aborting because a cross database stored procedure execution was detected. This event needs to be manually applied, and skipped before restarting the RepAgent. (sproc dbid %d, sproc objid %ld, current marker (%d, %d)) 
%S_REPAGNT. Could not allocate %d bytes from heap memory. You may need to re-configure with more memory.
%S_REPAGNT. The data at (%d, %d) is truncated because the Replication Server, ’%.*s’, cannot handle wide data. Check the ’data limits filter mode’ configuration parameter.
%S_REPAGNT. The data at (%d, %d) is too wide for the Replication Server, ’%.*s’, to handle. Check the ’data limits filter mode’ configuration parameter.
%S_REPAGNT. The data at (%d, %d) is skipped because it contains data wider than the Replication Server, ’%.*s’, can handle. Check the ’data limits filter mode’ configuration parameter.

Number	Severity	Text and Explanation
9201	20	%S_REPAGNT: Could not map OAM Page (%d) to object id, current marker (%d, %d). Explanation: Internal error, affects current process. Contact your SA.
9202	20	%S_REPAGNT: Nested replicated stored procedure detected. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = %d, %d) Explanation: Internal error, affects current process. Contact your SA.
9203	20	%S_REPAGNT: Encountered an End Transaction that was not in abort state while locating after image for Delete at (%d, %d), transaction = (%d, %d). Explanation: Internal error, affects current process. Contact your SA.
9204	20	%S_REPAGNT: Could not locate schema for object with id = (%d), current marker (%d , %d). Explanation: Internal error, affects current process. Contact your SA.
9205	20	%S_REPAGNT: A replicated End Stored Procedure Execution log record was found with out a Begin. Transaction log may be corrupt. Please contact SYBASE Technical Support. objid = (%d), current marker = (%d, %d) Explanation: Internal error, affects current process. Contact your SA.
9206	20	%S_REPAGNT: Error initializing the Rep Agent. Could not set affinity to engine (% d). Explanation:
9207	20	%S_REPAGNT: Could not re-read XCMDTEXT log record at (%d, %d), current marker (%d , %d). Explanation: Internal error, affects current process. Contact your SA.
9208	20	%S_REPAGNT: Update detected within a subscribable function. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)). Explanation: Internal error, affects current process. Contact your SA.
9209	20	%S_REPAGNT: Missing datarow in TEXT/IMAGE insert log record. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)). Explanation: Internal error, affects current process. Contact your SA.
9210	20	%S_REPAGNT: Fatal error from CT-Lib. (CT-Lib command = %s, return status = %d). Explanation: Internal error, affects current process. Contact your SA.
9211	20	%S_REPAGNT: Received the following error message from the Replication Server: Msg %ld. %.s. Explanation:* Internal error, affects current process. Contact your SA.
9212	20	%S_REPAGNT: Received the following communications error message: Msg %s: %.s. Explanation:* Internal error, affects current process. Contact your SA.
9213	16	%S_REPAGNT: The version of this Rep Agent, is not supported by the Replication Server specified. After fixing this problem, restart the Rep Agent for this database. (Rep Agent version = %d, Rep Server version = %d, Rep Server = %.s). Explanation:* Adaptive Server could not perform the requested action. Contact your System Administrator.
9214	16	%S_REPAGNT: Failed to connect to Replication Server. Please check the Replication Server, username, and password specified to sp_config_rep_agent. RepSvr = %.s, user = %. s). Explanation: Check your replication environment as recommended.
9215	16	%S_REPAGNT: The Secondary Truncation Point is not valid. Please make sure that the Secondary Truncation Point is valid, and then restart the Rep Agent Thread for this data base. Explanation: Take recommended action.
9216	10	%S_REPAGNT: The Rep Agent Thread will retry the connection to the Replication Server every %d second(s). (RepSvr = %.s). Explanation:* Informational message.
9217	10	%S_REPAGNT: Trace log file set to `%s'. Explanation: Informational message.
9218	16	Database %S_DBID has not been enabled yet for an integrated Rep Agent Thread. Run sp_enable_rep_agent() to enable the database. Explanation:
9219	20	%S_REPAGNT: Internal coding error. Explanation: Internal error, affects current process. Contact your SA.
9220	16	%S_REPAGNT: The Rep Agent Thread context for database %S_DBID has already been reserved by another session. Explanation:
9221	16	Parameter count/type mismatch. Please check the number and types of the parameters passed to the builtin function, '%.s'. Explanation:*
9222	16	You must be SA, DBO, or have REPLICATION role to execute the builtin function, '% .s'. Please check your current roles. Explanation:*
9223	16	Unknown operation, '%.s', specified to builtin function rep_agent_admin(). Please check parameter spelling and placement. Explanation:*
9224	16	Unknown category, '%.s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement. Explanation:*
9225	16	Unknown property, '%.s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement. Explanation:*
9226	16	Database %S_DBID has already been enabled to use a Rep Agent thread. Explanation:
9227	17	%S_REPAGNT. Could not allocate memory to spawn Rep Agent thread. (size=%d) Explanation:
9228	17	%S_REPAGNT. Could not spawn Rep Agent Thread. Explanation: There may be a memory-related or other resource problem.
9229	16	%S_REPAGNT. Could not change to database, %S_DBID. Explanation: Check syntax and input data.
9230	16	The Rep Agent Thread for database, %S_DBID, is not running. Please retry this command after starting the Rep Agent Thread for this database. Explanation:
9231	16	%S_REPAGNT. The Connect Dataserver name was not specified via 'sp_start_rep_agent ', nor was it found in sysattributes, or sysservers. Make sure that you have done a 'sp_ad dserver <svr>, local'. Explanation: When generating the 'connect source' command for Replication Server, the connect dataserver attribute could not be determined. You can set connect dataserver attribute directly with sp_start_rep_agent, or configure it via sp_config_rep_agent. This is only necessary if the requested dataserver is other than the current dataservername. You must also do an 'sp_addserver , local' in all cases.
9232	16	%S_REPAGNT. The Connect Database name was not found in sysattributes, or sysdatabases. Explanation: When generating the 'connect source' command for Replication Server, the connect dataserver attribute could not be determined. You can set connect dataserver attribute directly with sp_start_rep_agent, or configure it via sp_config_rep_agent. This is only necessary if the requested dataserver is other than the current dataservername.
9233	17	%S_REPAGNT. Could not allocate %d bytes from the procedure cache. Please retry the last operation when more memory is available, or re-configure the server with a larger procedure cache. Explanation: Command failed due to resource limitation. Modify the command to fit available resources, retry when the resource is available, or contact your System Administrator to address the resource problem.
9234	17	%S_REPAGNT. Could not start Rep Agent Thread. Explanation:
9235	17	Could not allocate memory for gettrunc. Please retry gettrunc() later when more memory is available, or re-configure the server with a larger procedure cache. Explanation:
9236	11	Unknown dbid '%d' specified. Please check the dbid specified. Explanation: Check the value of the database ID specified in the query.
9237	16	%S_REPAGNT. The row for %.s could not be found in sysattributes. Please check the configuration properties for this database with 'sp_config_rep_agent ' or 'sp_help_rep_agent'. Explanation:* This message is displayed when you have not configured a required RepAgent attribute.
9238	16	Settrunc() is not permitted when a Rep Agent Thread is currently running on the database. Explanation:
9239	17	%S_REPAGNT: Could not allocate a Procedure Cache for the Rep Agent Thread. Try restarting the Rep Agent Thread after freeing up, or allocating a larger Procedure Cache. Explanation:
9240	17	%S_REPAGNT: Could not allocate an alarm. Try restarting this Rep Agent Thread after freeing up some alarms, or restart the server with more alarms allocated. Explanation:
9241	20	%S_REPAGNT: Failure initializing the Rep Agent Context. Explanation: Internal error, affects current process. Contact your SA.
9242	20	%S_REPAGNT: Underflow or overflow of state stack occurred. Explanation: Internal error, affects current process. Contact your SA.
9243	20	%S_REPAGNT: Interface error with the Replication Server. The Rep Agent may not be compatible with the Replication Server. Explanation: Internal error, affects current process. Contact your SA.
9245	20	Failure during update/insert/delete from sysattributes. Explanation: Report this error to the System Administrator so dbcc diagnostics can be run.
9249	17	Failed to reserve context in shared mode. Explanation: Replication error. Contact your SA.
9250	10	%S_REPAGNT Failed to open trace file, '%.s'. Trace messages will go to stdout of the server. Explanation:* Informational message.
9251	20	%S_REPAGNT Write to trace file, '%.s', failed Explanation:* Internal error, affects current process. Contact your SA.
9252	20	Internal coding error in builtin function, '%.s'. Explanation:* Contact Sybase Technical Support.
9253	20	Failed to get secondary truncation point. Explanation: Internal error, affects current process. Contact your SA.
9254	20	%S_REPAGNT: Could not locate schema version for object id '%d' in the transaction log. Explanation: Internal error, affects current process. Contact your SA.
9255	20	%S_REPAGNT: Rewrite of PREPARE log record failed at (%d, %d). Explanation: Internal error, affects current process. Contact your SA.
9256	20	%S_REPAGNT: Could not read INOOP log record at (%d, %d), current marker (%d, %d). Explanation: Internal error, affects current process. Contact your SA.
9257	20	%S_REPAGNT: Could not read ROWIMAGE log record at (%d, %d), current marker (%d, % d). Explanation: Internal error, affects current process. Contact your SA.
9258	20	%S_REPAGNT: Could not re-read EXECBEGIN log record at (%d, %d), current marker (% d, %d). Explanation: Internal error, affects current process. Contact your SA.
9259	20	%S_REPAGNT: Could not read TEXTINSERT/INOOPTEXT log record at (%d, %d), current marker (%d, %d). Explanation: Internal error, affects current process. Contact your SA.
9261	20	%S_REPAGNT: This Rep Agent Thread is aborting due to an unrecoverable communications or Replication Server error. Explanation: Internal error, affects current process. Contact your SA.
9262	16	Failed to start a Rep Agent Thread for the database specified because a Rep Agent Thread is already running for that database. Explanation: Check replication environment.
9263	10	%S_REPAGNT: Turning Batch mode on. Explanation:
9264	10	%S_REPAGNT: Turning Batch mode off. Explanation: This is an informational message.
9265	10	%S_REPAGNT: Ignoring LTL errors. Explanation: This is an informational message.
9266	10	%S_REPAGNT: Error in passthru packet: '%.s'. Explanation:*
9267	20	%S_REPAGNT: A security mechanism was specified, but no security service(s) were specified. Please use 'sp_config_rep_agent' to specify which security service(s) to use when connecting to the Replication Server. Explanation: Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by the message.
9268	20	%S_REPAGNT: The security service '%.s' was specified, but it is not supported by the security mechanism. Please check the security service(s) and/or security mechanism specified to sp_config_rep_agent. (CT-lib error %d). Explanation:* Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by the message.
9269	20	%S_REPAGNT: Failure initializing the security mechanism '%.s'. Please check the 'security mechanism' specified to sp_config_rep_agent. (CT-lib error % d). Explanation:* Check the security mechanism that was specified for connections to the Replication Server.
9270	10	%S_REPAGNT: Using default security mechanism. Explanation: This is an informational message. No action is required.
9271	20	%S_REPAGNT: Failure initializing the default security mechanism. Please check that a security mechanism has been properly configered. (CT-lib error %d) Explanation: Check the default security mechanism set up for Replication Server.
9272	20	%S_REPAGNT: Failure specifying the keytab filename. Please check that the keytab file '%.s', exists and is accessable. (CT-lib error %d). Explanation:* Check the Replication Server setup indicated in the message.
9273	10	%S_REPAGNT: Using default keytab file because security mechanism requir es a keytab file, but the no keytab file was specified at server startup. Explanation: This is an informational message. No action is required.
9274	16	Cannot disable the RepAgent thread for database %S_DBID, because the RepAgent is still running. Please stop the RepAgent on that database with 'sp_stop _rep_agent' before re-issuing 'sp_config_rep_agent disable'. Explanation: Command failed due to invalid or illegal request. Take corrective action indicated by the message.
9275	20	%S_REPAGNT: Could not locate the after image for the DELETE log record at (%d, %d). Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9276	20	Error executing the command 'set proxy %.s'. Explanation:* Failure to execute the command 'set proxy %.*s' on the Replication Server. Report the error to your System Administrator.
9277	20	%S_REPAGNT: The security mechanism configured requires a keytab file. Check that the a keytab file was specified at server startup, and that 'use security services' has been configured. Explanation: The RepAgent is initializing security services, and the mechanism needs a keytab file. However it cannot locate the keytab file, either because a keytab file was not specified at server startup, or because 'use security services' has not been configured yet.
9278	0	%S_REPAGNT: Encountered a feature that cannot be supported by the current Replication Server version. Upgrade the Replication Server version to a higher level, or use sp_config_rep_agent to set the ’skip unsupported features’ option. Explanation: This is an informational message. No action is required.
9279	0	%S_REPAGNT: Connecting to a Replication Server that supports a lower LTL version. Features that are not supported by the lower LTL version may cause the RepAgent to shutdown. Set the ’skip unsupported features’ configuration option to prevent shutdown. Explanation: This is an informational message. No action is required.
9280	10	%S_REPAGNT: Unable to start RepAgent on database %S_DBID, because that database has not been recovered and/or is not online. Please start the RepAgent manually using sp_start_rep_agent when it is ready. Explanation: This is an informational message. No action is required.
9281	10	%S_REPAGNT: The Replication Server LTL version should be at least %d for full support of features. (Replication server LTL version %d, Rep Agent LTL version %d). Explanation: This is an informational message. No action is required.
9282	20	%S_REPAGNT: No free file descriptors available. Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9283	20	%S_REPAGNT: Aborting because a cross database stored procedure execution was detected. This event needs to be manually applied, and skipped before restarting the RepAgent. (sproc dbid %d, sproc objid %ld, current marker (%d, %d)) Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9284	17	%S_REPAGNT. Could not allocate %d bytes from heap memory. You may need to re-configure with more memory. Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9285	17	%S_REPAGNT. The data at (%d, %d) is truncated because the Replication Server, ’%.s’, cannot handle wide data. Check the ’data limits filter mode’ configuration parameter. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9286	17	%S_REPAGNT. The data at (%d, %d) is too wide for the Replication Server, ’%.s’, to handle. Check the ’data limits filter mode’ configuration parameter. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
9287	17	%S_REPAGNT. The data at (%d, %d) is skipped because it contains data wider than the Replication Server, ’%.s’, can handle. Check the ’data limits filter mode’ configuration parameter. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.